Microplaques

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• Reduction of sample volume by up to 50 %
• Standardised pathlength (1 cm=170 μl, 0.5 cm=80 μl)
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

The product range of the 1536 well polystyrene microplates is extended by a polypropylene storage plate (Deep Well microplate) with a total volume of 18 μl. The working volume of this plate is between 3 and 15 μl.

Properties:

• Uniform external dimensions and tolerances
• Alphanumeric well coding
• High chemical resistance
• High temperature resistance (-196 °C to +121 °C)
• Sealable with adhesive films and heat sealer

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• Perfect for top reading even at low working volumes
• Suited for transmission, fluorescence and luminescence applications
• Excellent optical properties
• Optimal performance
• Highest possible degree of automation
• 96 and 384 well format availbale

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Lid enables gas exchange with the lowest possible evaporation
• High clarity of the clear microplates for optimal microscopic examinations
• Stackable
• Alphanumeric well coding

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• FLUOTRAC™ are black microplates for fluorescence measurements
• LUMITRAC™ are white microplates for luminescence measurements

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• High clarity enables optimal microscopic examinations
• Lid enables optimal gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• Individually wrapped peel-off bags
• Consecutive lot numbering
• 384 and 1536 well foramt available

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need.

Properties:

• Uniform external dimensions
• Well-to-well spacing 9 mm
• Alphanumeric well coding
• High chemical resistance
• High temperature resistance (-196 °C to +121 °C)
• Sealable with adhesive films and heat sealer
• Sealable with CapMats
• F-Bottom / Chimney Well: chimney-like arrangement wells, each well stands on its own
• V-Bottom: entire sample volume must be pipetted off

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• High clarity enables optimal microscopic examinations
• Lid enables optimal gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• Individually wrapped peel-off bags
• Consecutive lot numbering
• 384 and 1536 well foramt available

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• F-Bottom / Chimney Well: chimney-like arrangement wells, each well stands on its own
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• F-Bottom / Chimney Well: chimney-like arrangement wells, each well stands on its own
• FLUOTRAC™ are black microplates for fluorescence measurements
• LUMITRAC™ are white microplates for luminescence measurements
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

Streptavidin-coated solid phases serve as reliable binding surfaces for all types of biotinylated molecules. Numerous ligands can be biotinylated simply and due to the low molecular weight of biotin (244 Da) the functionality of the molecules is normally not impaired.

Propporties:

• Shelf-life: 3 years at room temperature
• Pre-blocking: All plates are pre-blocked and ready-to-use
• Streptavidin-coating 96 well 300 μl
• Streptavidin-coating 384 well 90 μl
• Rapidly isolate, determine and quantify components from a reaction mixture
• Complete reaction chains on a streptavidin solid phase is possible
• Bound to the plate surface in a uniform and stable layer

Idéal pour le scellage des plaques PCR.

• PCR clean : garantis exempts d'ADN humain, DNase, RNase et d'inhibiteur PCR
• Film PCR : permet le contrˆle visuel de l'échantillon
• Feuille PCR : facile à percer, pas de collage aux embouts de pipette (idéal pour les systèmes automatisés)
• Scellage à la chaleur : films ou feuilles sont collés sur la plaque et scellés par la scelleuse thermique
• Les couches de scellage sont réutilisables et autoclavables

Accessories

Développés pour les immuno-essais en phase solide à visée quantitative et qualitative, comme les techniques ELISA.

• Système d'orientation alphanumérique
• Format standard 128 x 86 mm
• Excellente qualité optique
• Quatre types de fond : plat (F), rond (U), plat avec coins arrondis (C) ou StarWell™
• Cadres et modules disponibles séparément
• Les modules restent dans le cadre quand on les secoue
• Certificat pour l'homogénéité de liaison
• Modules autonomes

Choix de différentes surfaces :
PolySorp™, Immulon™ 1B et Universal Binding (UB) servent à l'absorption de molécules hydrophobes.
Medisorp™ et Immulon 2HB sont légèrement hydrophiles et se lient à de nombreuses biomolécules.
MaxiSorp™, Immulon 4 HBX et Enhanced Binding (EB) sont hydrophiles et conviennent parfaitement pour des essais avec des anticorps «en sandwich».
MultiSorp™ sont extrêmement hydrophiles et conviennent pour des glycanes et des protéines solubles dans l'eau.

Microplaques pour immuno-essais avec des surfaces pour liaisons d'affinité (streptavidine passive et Immobilizer Streptavidin, chelate de nickel et glutathion, BioBind).

• Interaction streptavidine-biotine pour un grand nombre de biomolécules
• Surface de liaison hautement spécifique
• Amélioration du rapport signal-bruit
• Plaque 96 puits : volume de travail 100 µl/puits, volume total 350-400 µl/puits
• Plaque 384 puits : volume de travail 50 µl/puits, volume total 120 µl/puits

Lids offer protection against contamination and evaporation during sample storage and cell cultivation. Four different polystyrene lids are available. High profile without condensation rings is mainly used for non TC-treated 96 well microplates. High profile with condensation rings is recommended for cell culture applications, since it ensures an optimum oxygen supply to cultivated cells due to improved gas exchange. Low profile lids contents are protected against evaporation and contamination, and the covered microplates can be easily gripped on the side in automated processes. Universal ultra low profile lids is compatible with a whole range of different microplates, provides the greatest possible protection against evaporation, and is also suitable for use in automated systems.

Properties:

• Endotoxin-free
• Free of detectable DNase, RNase, human DNA
• All sterile lids are non-cytotoxic

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• High clarity enables optimal microscopic examinations
• Lid enables optimal gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• Individually wrapped peel-off bags
• Consecutive lot numbering
• 384 and 1536 well foramt available

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need.

Properties:

• Uniform external dimensions
• Well-to-well spacing 9 mm
• Alphanumeric well coding
• High chemical resistance
• High temperature resistance (-196 °C to +121 °C)
• Sealable with adhesive films and heat sealer
• Sealable with CapMats

We set high standards on the quality of our immunological products, especially on consistency and reproducibility of binding properties. The incoming raw material used for ELISA microplates is routinely monitored for identity and immunological quality. All ELISA are ideally suited for optical measurements. Two surface qualities offers for ELISA
microplates: the hydrophilic high binding products and the less hydrophilic medium binding products.

Proporties:

• Manufactured from crystal clear polystyrene
• Compatible with automated systems
• High-throughput manner
• Cost-effective
• Results rapid available

White and black versions are available on request.

Alternative Plaque 384/1536 puits avec couvercle, PS Alternative Plaque de microtitration 96 puits, PS

Non-binding surfaces from Greiner Bio-One are achieved through a stable chemical modification to covalently link functional groups with the base polystyrene polymer. Under aqueous assay conditions a hydrate layer forms, preventing dissolved biomolecules from binding to the microplate surface. As the non-binding surface is stable under common assay conditions, there is no potential for degradation or leaching and resultant assay interference.

Properties:

• Äußerst geringe, nicht-spezifische Biomolekülbindung (Proteine, DNA, RNA)
• Langfristige Oberflächenbeständigkeit ohne Degeneration oder Auswaschen
• Hohe Testsensitivität mit reduziertem Hintergrund

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding

Non-binding surfaces from Greiner Bio-One are achieved through a stable chemical modification to covalently link functional groups with the base polystyrene polymer. Under aqueous assay conditions a hydrate layer forms, preventing dissolved biomolecules from binding to the microplate surface. As the non-binding surface is stable under common assay conditions, there is no potential for degradation or leaching and resultant assay interference.

Properties:

• Äußerst geringe, nicht-spezifische Biomolekülbindung (Proteine, DNA, RNA)
• Langfristige Oberflächenbeständigkeit ohne Degeneration oder Auswaschen
• Hohe Testsensitivität mit reduziertem Hintergrund

SCREENSTAR microplates are specialised products for sophisticated microscopic
applications, in high content screening (HCS) or high resolution microscopy with water and oil immersion objectives. They combine outstanding glass-like optical properties with an excellent surface for adherent cell culture. Display excellent optical properties with reduced autofluorescence in the lower UV range and low birefringence. Enable complete periphery access for high magnification objectives.

Proporties:

• 190 μm ultraclear cycloolefin film bottom
• refractive index of 1.53 comparable to glass
• Recessed microplate bottom allows low working distance and high aperture
• Round well geometry to reduce optical distortions
• Smooth microplate top absent improves heat sealing
• Are available in 96, 384 and 1536 well format

In the case of concentration determinations in microplates, the measurement is made vertically and the layer thickness of the sample to be measured is dependent on the sample volume. Even with smaller sample volumes, the resulting layer thicknesses are sufficient for precise measurement. At a constant sample volume, concentrations can be determined with the aid of a calibration curve.

Properties:

• Optical window down to 230 nm ideal for nucleic acid determinations at 260 nm/280 nm
• For measurements of protein concentration at 280 nm
• Transmission measurements with UV light up to 230 nm
• DMSO-resistant
• Stored at -20 °C without any problem

For the propagation of fastidious cells like primary or sensitive cells as well as cells cultivated under restricted growth conditions. Furthermore, the Advanced TC™ surface facilitates consistent and homogenous cell attachment increasing the overall cell yield and reducing cell loss, for example during automated washing steps. Moreover, cells cultivated on the Advanced TC™ surface exhibit higher transgene activity after gene transfer / insertion. Due to the production process, the modification of the polymer assures consistant and reproducible product quality. Transport and storage can be carried out at room temperature.

Proporties:

• For particularly demanding cells
• Consistent cell attachment
• Homogenous cell growth, for example during automated washing steps
• non-cytotoxic and free of detectable DNase, RNase and human DNA and endotoxins

Microplates in strip format offer the advantage of greater flexibility in diagnostics. Individual strips can be removed from the support frame so that the number of tests to be performed can be adjusted to the number of samples, and is not predetermined by the microplate format used. In addition, the individual strips of a microplate can be subjected to a wide variety of different test conditions.

Proporties:

• Strips mounted in frame
• U-Bottom: no corners, therefore simple and clean pipetting
• F-Bottom: ideal for the most precise optical measurements

Microplaques blanches, noires ou transparentes, d'une qualité optique excellente avec des puits à fond plat.
Traitement de surface Nunclon™Δ, Collagène I, Poly-D-Lysine pour la culture cellulaire et essais cellulaires.
Matériau : Polystyrène
Volume utile : 400 µl/puits

Les plaques Protein LoBind sont conçues spécialement pour la protéomique et d'autres domaines de la recherche sur les protéines. Conçues pour le traitement ou le stockage d'échantillons de protéines, peptides ou anticorps, essais enzymatiques, stockage desolutions mères de virus ou suspensions de cellules et traitement d'échantillons en toxicologie.

• Fond en V
• Marquage alphanumérique à fort contraste
• Puits transparents avec bord blanc
• Design de puits arrondi RecoverMax^®
• Cadre de puits réhaussé pour un scellage sûr
• PCR clean : sans ADN humain, DNase, RNase ni inhibiteurs de PCR

Alternative Microplaques Protein LoBind, 384 puits, PP, avec code-barre

Conviennent pour stockage et préparation d'échantillons, analyses de protéines et génotypage.

• Identification alphanumérique à fort contraste
• Puits transparents avec bord blanc
• Design de puits arrondi RecoverMax^®
• Cadre de puits réhaussé pour un scellage sûr, même en scellage à chaud
• Résistance thermique de -86 °C à 100 °C
• Autoclavables (121 °C, 20 min)
• Résistance à la centrifugation jusqu'à 6000 x g
• Stérile

Alternative Microplaques, 96/384 puits, PP, avec code-barre Alternative Microplaques, 96/384 puits, PP, PCR clean

Microplaques pour immuno-essais avec des surfaces pour liaisons covalentes. Avec orientation principale vers les peptides. Volume de travail 100 µl/puits, volume total 350-400 µl/puits.

• Lessivage minimum
• Résistant au rinçage puissant
• Orientation contrˆlée

Pour des essais d'extinction dans le détection de fluorescence et luminescence, concentration d'ADN et de protéines avec colorants d'absorption ou de fluorescence, essais à base de cellules, tests de viabilité de cellules et de l'apoptose. Les microplaques Eppendorf noires offrent un bon rapport signal-bruit. Les microplaques Eppendorf blanches maximisent la réflection et sont ainsi optimisées pour la plus grande sensibilité pour la détection de la luminescence.

Alternative Plaques de microtitrage, 96/384 puits, PCR clean, avec code-barre Alternative

Cet appareil ALPS 50V permet le scellage sûr et contrˆlé de plaques d'échantillons en différentes matières plastiques. La durée et la température du scellage sont réglables. Pendant l'opération, un affichage indique le temps restant. L'ALPS 50V est prévu pour sceller des plaques deep-well (bioblocs) avec des films en plastique ou métal. Et si on utilise les supports de plaques adaptés, il convient aussi pour des microplaques et plaques PCR.

Caractéristiques
Température de scellage :	125 à 200 °C par pas de 1 °C
Durée de scellage :	1 à 9 sec. par pas de 0,5 sec.
Humidité ambiante admissible :	20 à 80 %, sans condensation
Température de fonctionnement :	18 à 30 °C
Dimensions (l x p x h) /	220 x 321 x 425 mm
Poids :	7,2 kg
Alimentation :	IEC 320, 100-130 VAC, 50/60 Hz ou 220-240 VAC, 50/60 Hz, max. 350 W
Normes :	FCC Classe A, CFR 47 Partie 15 BS EN 61326:1998

Alternative Thermo-soudeuse semi-automatique AccuSeal

• V-shape provides optimal recovery of reagents
• Shared wall technology increases well volume and wider cells improve mixing
• Ideal as collection plate for Nunc Filter Plates
• Low binding for homogeneous assays and storage