Lam

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Cut microscope slides are particularly economical and therefore represent an excellent alternative to the ground versions, for routine tasks. The corners and edges are 90° for all cut microscope slides.

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

The ground version of the slides is used to avoid cutting injuries or glass breakages during automated processing. Microscope slides have corners with either 45° or 90°. The edges are 90° for all ground microscope slides.

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Adhesion slides ensure quicker flatness and better adhesion of the samples. The microscope slides with a white frosted area and ground edges are supplied in shrink-wrapped plastic boxes of 72 pieces. The angle of the edges and corners for both items is 90°.

The white LABSOLUTE® slide dispenser made of ABS guarantees clean, dust-free and clearly organised storage of up to 72 slides with a maximum size of 76x26 mm. The transparent front disc is made of PS. One slide is dispensed at a time by turning the knob. Only absolutely dry slides may be inserted.

Slide dispenser can dispense 72 slides, individually. By turning the knob, one slide is dispensed. Only dry slides should be inserted into the storage magazine. With transparent, removable upper section for easy viewing of remaining slides and clean storage. For microscope slides with dimensions 75 x 25 mm and 76 x 26 mm.

A new application method provides the surface of a slide with a permanent positive charge. Electrostatic attraction binds fresh, frozen tissue sections and cytology preparations. Also available with blue, yellow, pink or green SuperFrost marking area.

According to ISO 8037/1. Prewashed and polished. Also available with 20 mm, frosted, writing patch at one end.

According to ISO 8037/1. With colour-coded writing patch as outlined below. Size 76mm x 26mm. Nominal thickness 1.0mm. With cut or ground edges. An extensive color palette allows easy and clear identification and classification of different examination preparations.

With hemispherical cavity, 32mm diameter and 40mm x 40mm glass cover plate.

This slide holder has a sloped groove that accepts up to 10 single or double slides standing on end. Front ledge serves as a place to dry slides. Made of durable polystyrene.

75mm x 25mm x 1.0mm, with 90° ground edges.

Sterile trough-shaped reservoirs with pour-off spouts on all 4 corners. With graduations on inside wall.

For microscope slides 76 x 26 mm. For storing, cleaning, drying microscope slides. Robust design with anti-slip rubber feet. Temperature resistant in the range -50 to +80°C.

• Selected glass quality, non corrosive
• Cleaned, ready to use

• Made of soda lime glass of third hydrolytic class
• In compliance with DIN ISO 8037/1
• Frosted microscope slides (as indicated) with marking area of approx. 20 mm on both sides
• pre-cleaned and ready for use
• autoclavable

Suitable for immunohistochemistry and in situ hybridization.

• Made of soda lime glass of the 3rd hydrolytic class
• Pre-cleaned and ready for use
• Autoclavable
• In compliance with DIN ISO 8037/1 and for in vitro diagnostic applications according to IVD Directive 98/79 / EC
• With recommended best-before date and batch number

With well wettable reaction wells and epoxy resin colour masks with high resistance against solvents. Available in black, blue, green, red and white colour.

• Made of soda lime glass of third hydrolytic class
• In compliance with DIN ISO 8037/1
• With 90° ground edges
• With frosted marking area of approx. 20 mm on one side
• Pre-cleaned and ready for use
• Autoclavable

ABS plastic / PS.
Holds approximately 50 slides 76 x 26 mm.
Transparent, removable upper section means slides are clearly visible and can be kept clean.
For use with dry slides only!

These slides have a complex adhesive technology which attracts and chemically bonds fresh or formalin-fixed frozen tissue sections firmly to the surface of the slide. Recommended for hard-to-hold tissue samples like bone, brain, breast and skin. They are ideal for special stains, immunocytochemical and in-situ DNA hybridisation on these tissue types.

Suitable for immunohistochemistry and in situ hybridization.

• Made of soda lime glass of the 3rd hydrolytic class
• Pre-cleaned and ready for use
• Autoclavable
• In compliance with DIN ISO 8037/1 and for in vitro diagnostic applications according to IVD Directive 98/79 / EC
• With recommended best-before date and batch number

• Suitable for labeling by printer systems and with permanent markers

Suitable for immunohistochemistry and in situ hybridization.

• Made of soda lime glass of the 3rd hydrolytic class
• Pre-cleaned and ready for use
• Autoclavable
• In compliance with DIN ISO 8037/1 and for in vitro diagnostic applications according to IVD Directive 98/79 / EC
• With recommended best-before date and batch number

According to ISO 803-1. Half white, hydrolytic class 3. With cut or ground edges.

Stackable slide boxes for 25 or 100 standard slides (26 x 76 mm).

• Hinged lid with a latch lock
• Molded feet enable secure stacking
• Slots have molded numbers to correspond to the slide inventory card
• Molded labeling area with "Project" and "Date"
• Removable inventory card

27 x 75 mm. With enhanced cell attachment compared to slides made from glass.

Fully developed marking system for all preparations in medical and scientific laboratories. The microscope slides have a coated labelling field in white color, dimensions approx. 76 x 26 mm. Thickness approx. 1 mm.