Test sieves

For difficult to separate materials which require dry sieving. Different aids are used according to mesh size.

Stainless steel. In accordance to ISO 3310-1:2016 and ASTM E11:2009.

Test materials can be used to check analytical sieves between the schedulded calibration dates and to demonstrate the presence of the required properties, as well as the suitability of analytical sieves. A test material for analytical sieves with frequent mesh widths ( 2.0mm - 1.0mm - 0.5mm - 0.25mm - 0.125mm ).

• Pack of 3 bottles, 202g each
• Grain size : from 0.125mm to 2.00mm
• Data sheet for the use of traceability for analytical sieves

Thermo-fixed Polyamide (Nylon) mesh is temperature stable from -40 °C to 115 °C. In water from 95 °C to 100 °C. Stability in acids is limited and dependent on concentration and temperature. Nylon exhibits outstanding stability in alkalis, including sodium and potassium solutions. Its chemical behaviour with respect to organic solvents is moderate to good. Minimum mesh width: 102 cm, Length: 1 m

Other sizes available on request.

Thermo-fixed PE mesh with temperature resistance from -75 °C to 150 °C (short). For long term heating max. 125 °C. Resistant to acids but not alkalis.
Dimensions: Minimum width 102 cm, Length 100 cm.

Other sizes available on request.

With welded seam (heat resistant up to 170 °C). Diameter: 100 mm.
Height 45 mm.

With soft solder seam (temperature resistant to 170°C). 100mm diameter. Height 45mm.

With soft solder seam (temperature resistant to 170øC).
100mm diameter.
Height 45mm.

With soft solder seam (temperature resistant up to 170 °C).
Diameter: 200 mm.

With soft solder seam (temperature resistant to 170°C).
200mm diameter.
Height 25mm.

With welded PVC seam (temperature resistant up to 70 °C). Diameter: 200 mm. Height: 50 mm.

With welded PVC seam (temperature resistant to 70 °C).
200 mm diameter. Height 50 mm.

With welded seam (heat resistant up to 170 °C). Diameter: 200 mm.
Height: 50 mm.

With soft solder seam (temperature resistant to 170°C). 200mm diameter. Height 50mm.

With soft solder seam (temperature resistant to 170°C). 200mm diameter. Height 50mm.

• Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspection
• High quality joining technology guarantees permanently taut wire mesh
• High level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel
• "one-piece cast" sieve frame and seamless mesh joint prevent cross contamination
• Maximum stability and optimum density of the sieve stack
• Clear sieve marking and traceability by individual laser engraving on each sieve

• Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspection
• High quality joining technology guarantees permanently taut wire mesh
• High level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel
• "one-piece cast" sieve frame and seamless mesh joint prevent cross contamination
• Maximum stability and optimum density of the sieve stack
• Clear sieve marking and traceability by individual laser engraving on each sieve

• Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspection
• High quality joining technology guarantees permanently taut wire mesh
• High level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel
• "one-piece cast" sieve frame and seamless mesh joint prevent cross contamination
• Maximum stability and optimum density of the sieve stack
• Clear sieve marking and traceability by individual laser engraving on each sieve

• Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspection
• High quality joining technology guarantees permanently taut wire mesh
• High level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel
• "one-piece cast" sieve frame and seamless mesh joint prevent cross contamination
• Maximum stability and optimum density of the sieve stack
• Clear sieve marking and traceability by individual laser engraving on each sieve

• Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspection
• High quality joining technology guarantees permanently taut wire mesh
• High level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel
• "one-piece cast" sieve frame and seamless mesh joint prevent cross contamination
• Maximum stability and optimum density of the sieve stack
• Clear sieve marking and traceability by individual laser engraving on each sieve

• Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspection
• High quality joining technology guarantees permanently taut wire mesh
• High level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel
• "one-piece cast" sieve frame and seamless mesh joint prevent cross contamination
• Maximum stability and optimum density of the sieve stack
• Clear sieve marking and traceability by individual laser engraving on each sieve

Robust screen construction with plain stainless steel frame. With 2.1 certificate of conformity, acc. to EN 10204.
Dimensions (Ø x H): 203 x 28 mm

Robust screen construction with plain stainless steel frame. With 2.1 certificate of conformity, acc. to EN 10204.

Robust screen construction with plain stainless steel frame.
Dimensions (Ø x H): 203 x 28 mm

• Sturdy stainless steel sieve frame
• Smooth frame surface
• Precise mesh sizes
• Accurate edges
• With serial number and data matrix code
• Incl. Certificate of Compliance 2.1 acc. to DIN EN 10204
• Manufactured acc. to DIN ISO 3310-1

• Sturdy stainless steel sieve frame
• Smooth frame surface
• Precise mesh sizes
• Accurate edges
• With serial number and data matrix code
• Incl. Certificate of Compliance 2.1 acc. to DIN EN 10204
• Manufactured acc. to DIN ISO 3310-1

Frame and mesh made of stainless steel according to ISO 3310-1 with a compliance certificate.

Further test sieves and sieving accessories in other diameters and mesh widths also according to ASTM on request.

Frame and mesh made of stainless steel, according to ISO 3310-1, with compliance certificate.

Further test sieves and sieving accessories in other diameters and mesh widths also according to ASTM on request.

Frame and mesh made of stainless steel, according to ISO 3310-1, with compliance certificate.

Further test sieves and sieving accessories in other diameters and mesh widths also according to ASTM on request.

• Sturdy stainless steel sieve frame
• Smooth frame surface
• Precise mesh sizes
• Accurate edges
• With serial number and data matrix code
• Incl. Certificate of Compliance 2.1 acc. to DIN EN 10204
• Manufactured acc. to DIN ISO 3310-1

• Sturdy stainless steel sieve frame
• Smooth frame surface
• Precise mesh sizes
• Accurate edges
• With serial number and data matrix code
• Incl. Certificate of Compliance 2.1 acc. to DIN EN 10204
• Manufactured acc. to DIN ISO 3310-1

Suitable for dry or wet sieving (HAVER EML 200 Premium Remote only). The test sieve shakers generate a three-dimensional sieving motion for fast and reproducible sieving results. Thanks to G-Control, a constant amplitude is made possible.

• Timer: 0 to 99 minutes or continuous operation
• With inspection glass cover
• For test sieves with a sieve diameter of 50 mm to 203 mm

• With Ethernet interface
• Free amplitude selection up to 3 mm in 0.1 mm steps
• Interval adjustable (1 to 99 seconds)
• Up to 49 programme memory locations

• Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspection
• High quality joining technology guarantees permanently taut wire mesh
• High level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel
• "one-piece cast" sieve frame and seamless mesh joint prevent cross contamination
• Maximum stability and optimum density of the sieve stack
• Clear sieve marking and traceability by individual laser engraving on each sieve

• Previously unattained product quality owing to advanced manufacturing processes and continuous optical inspection
• High quality joining technology guarantees permanently taut wire mesh
• High level of corrosion resistance and easy to clean owing to the use of high-alloy stainless steel
• "one-piece cast" sieve frame and seamless mesh joint prevent cross contamination
• Maximum stability and optimum density of the sieve stack
• Clear sieve marking and traceability by individual laser engraving on each sieve

Frame made from POM, sieve fabric made from polyamide according to ISO 3310-1 with a compliance certificate.

Further mesh widths also according to ASTM on request.