Bulanıklık

Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.

Acrylic/PP. To hold two Imhoff sedimentation cones. Compact and easy to transport even when fully loaded.

Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.

Imhoff pattern. DIN 12672. Graduations and inscriptions in contrasting white enamel. Ring mark at 1000ml.

The microprocessor-based waterproof Infra-Red Turbidity meter TN-100 is easy-to-use and meets all rigor of rugged field applications. Using an Infrared light source, it delivers laboratory accuracy with a resolution of 0.01 NTU across an extended range of up to 20 NTU (Nephelometric Turbidity Units).

• IP67 Waterproof and Dustproof, easy cleaning and maintenance
• Automatic Push-Button Calibration (4 points) for unprecedented full-range accuracy
• Power-saving feature allows over 1200 measurements
• Large Easy-to-Read Display for optimum viewing of measurements with user-friendly message codes for easy troubleshooting
• Meets Performance Criteria as specified by ISO 7027 (DIN EN 27027) method

For determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.
Lowering line, please order separately.

Imhoff pattern, solid grey PVC. Stable design.

Imhoff pattern, solid grey PVC. Stable design.

Accessories for measuring instruments MultiLine^® IDS from WTW^® for measuring turbidity parameters. Please order measuring instruments separately.

For simultaneous injection of coagulant or reagents in six sample beakers.

For flocculation tests of water and waste water.

• choice of 2- or 6-bank models
• digital speed display
• two adjustable speed presets
• accurate and reproducible speeds
• diffused base illumination with black background
• accepts beakers up to 1000ml.

Turbidity is measured according to ISO 7027 by nephelometric means (90° scattered light). The infra-red light-source permits measurement of coloured and colour-free samples. The automatic measurement range detection facility (Autorange) enables direct turbidity measurement from 0.01 to 1100 NTU.

• Automatic overall range adjustment with standard set T-Cal
• High accuracy
• Suitable for laboratory and mobile use
• Memory storage of up to 1000 data-sets
• Real-time clock
• Waterproof sample chamber and housing

Acrylic/PP.
For two sedimentation cones made of glass or plastic, with and without stopcock. Compact and easy to transport even when full.

The turbidity meters Turb^® 430 IR acc. to DIN ISO 27027 and Turb^® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.
The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear^® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.

Scope of delivery:
Turb^® 430 IR / Turb^® 430 T: Turbidity meter with calibration set 0.02-10.0-100 NTU
Turb^® 430 IR/SET / Turb^® 430 T/SET: Turbidity meter in case with table insert, calibration set 0.02-10.0-100 NTU, PC software LSdata, accessories

Highly accurate turbidity standards composed of suspended microspheres, suitable for Instrument calibration and control of all turbidity meters. Stable, shelf life of 2 years (from Date of Manufacturing). NIST traceable, US EPA approved and tested in compliance with ISO 7027. HDPE bottles of 100 ml.

Two ranges available:

• Ratio range for Ratio Turbidity Measuring instruments (measure of the scattered light from the sample at a 90° angle from the incident light, plus at additional angles (several detectors)
• Non Ratio for Non Ratio Turbidity Measuring instruments will measure the scattered light from the sample at a 90° angle from the incident light (one detector)

Calibration kit includes 4 x 60 ml standard solutions (0.02, 20.0, 100, 800 NTU).

Each set contains one sealed cuvette with the indicated concentrations.

Transparent, sturdy frame for three 1000 ml Imhoff sedimentation vessels.

Scale: up to 100ml, ring mark: at 1000ml, subdivision: 0.1 ml (0-2ml), 0.5 ml (2-10ml), 1ml (10-40ml), 2ml (20-100ml), 50ml (100-1000ml).

Imhoff pattern, wood.

The portable turbidity meters are characterised by the use of Multipath 90° BLAC^® technology. Samples with low and high turbidity can be analyzed entirely nephelometric (Detection angle 90°) with the highest accuracy over the complete measuring range up to 4000 NTU. By eliminating stray light, highly accurate results are achieved for low turbidities down to 0.01 NTU.

• High performance optics to ensure accuracy
• Elimination of stray light through light absorbing trap (BLAC^®)
• Intuitive colour touch screen with animated guided procedures and straightforward data management, multilingual
• Visual warning for out-of-tolerance readings
• Data logger for 250 measurements plus all calibrations, verifications and factory recovery procedures
• 3 different modes: single, signal averaging, fast settling
• USB-C interface
• Optional operation with rechargeable battery pack or mains adapter

The portable turbidity meters are characterised by the use of Multipath 90° BLAC^® technology. Samples with low and high turbidity can be analyzed entirely nephelometric (Detection angle 90°) with the highest accuracy over the complete measuring range up to 4000 NTU. By eliminating stray light, highly accurate results are achieved for low turbidities down to 0.01 NTU.

• High performance optics to ensure accuracy
• Elimination of stray light through light absorbing trap (BLAC^®)
• Intuitive colour touch screen with animated guided procedures and straightforward data management, multilingual
• Visual warning for out-of-tolerance readings
• Data logger for 250 measurements plus all calibrations, verifications and factory recovery procedures
• 3 different modes: single, signal averaging, fast settling
• USB-C interface
• Optional operation with rechargeable battery pack or mains adapter

USB-C cable for easy data transmission to a PC.