Proteinuttryck
96 Well Immuno Plates, PS, flat bottom

Non sterile Immuno plates with transparent flat bottom, well suited for quantitative and qualitative solid phase immunoassays.
Choice of different surfaces:
PolySorp™, Immulon™ 1B and Universal Binding (UB) serve to absorb hydrophobic molecules.
Medisorp™ and Immulon 2HB are slightly hydrophilic and bind a variety of biomolecules....
Microplates BRANDplates® pureGrade™ S

BRANDplates
® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. Sterilised via ß-radiation. Especially suited for bacteriological assays.
- Sterile
- Individually packed
- Grey or embossed alphanumeric coding
- ANSI/SLAS format
Microplates BRANDplates® pureGrade™, 96-well

BRANDplates
® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. The standard plate for most applications. Particularly applicable for homogenous assays, screening, and in the field of storage....
Sealing Tapes for MultiWell Plates

Effectively seals all microplate formats for storage, PCR, microscopy, culture and protection. Pre-cut, plate-sized sheets.
Type 1) General use, PCR, storage, photo-sensitive samples
Type 2) Cell Culture, sterile applications
Type 3) Microscopy, good optics, low auto-fluorescence, DMSO compatible...
Microplates BRANDplates® pureGrade™, with UV transparent bottom

BRANDplates
® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. The standard plate for most applications. Particularly applicable for homogenous assays, screening, and in the field of storage....
96 Well ELISA Microplates

We set high standards on the quality of our immunological products, especially on consistency and reproducibility of binding properties. The incoming raw material used for ELISA microplates is routinely monitored for identity and immunological quality. All ELISA are ideally suited for optical measurements. Two surface qualities offers for ELISA...
F96 MicroWell™ Plates, PS

Clear, white or black plates with excellent optical clarity and flat bottom wells. Nunclon™Δ, MaxiSorp™, PolySorp™, Collagen I, Poly-D-Lysine surface modifications suitable for cell culture assays.
Material plates: Polystyrene
Total volume µl/well: 400...
Modules for Immunology, C8 LockWell, PS, breakable

Transparent modules in standard 96-well frames.
- Standard format 128 x 86 mm
- High optical quality for reliable results
- Free-standing modules with easy handling
- Alphanumeric system for better orientation
Choice of different surfaces:
PolySorp™ serve to absorb hydrophobic molecules....
96 Well Immuno™ Modules

Developed for quantitative and qualitative solid phase immuno assays, e.g. ELISA techniques.
- Alphanumeric orientation systems
- Standard format 128 x 86 mm
- High optical quality
- Four choices for bottom: flat bottom (F), round b. (U), flat with curved b. (C) or StarWell™
- Frames and modules available separately
- Modules remain in frame when inverted
- Certified reproducibility of binding
- Free-standing modul
C8 Single-break Strip Plates

Microplates in strip format offer the advantage of greater flexibility in diagnostics. Individual strips can be removed from the support frame so that the number of tests to be performed can be adjusted to the number of samples, and is not predetermined by the microplate format used. In addition, the individual strips of a microplate can be subjected to a wide variety of different test conditions....
C96 MicroWell™ Plates, PS, with MaxiSorp™ surface, certified

- C-shaped bottom for optimal washing and liquid retrieval
- FluoroNunc™ for fluorescence based immuno assays with minimal auto-fluorescence
- MaxiSorp™ for quantitative and qualitative solid phase immuno assays
C96 MicroWell™ Plates, PS, with PolySorp™ surface
- C-shaped bottom for optimal washing and liquid retrieval
- FluoroNunc™ for fluorescence based immuno assays with minimal auto-fluorescence
- PolySorp™ for quantitative and qualitative solid phase immuno assays
- Certified
Deep Well Plates, 96/48-well, PP

Deep-well plates from Ratiolab are available as standard or low profile version with different volumes from 1,2 to 4,6 ml for each well.
- Available with U-bottom (low profile + standard) and as V-bottom version
- SBS standard micro test plate format
- Wells with significantly larger cross section for reduced cross-contamination
- Improved visual control due to clear polypropylene
- 1,2 ml low profile is about half as high as conventional deep-well plates
- 30 % less storage space when using low profile plates
- Autoclavable at 121 °C, 20 min
- Temperature resistant to -80 °C
- 8 x 12 wells with alphanumeric code in micro test plate format
- Precise design, for use in automatic pipetting systems for High Throughput Screening (HTS)
- Optimum space for bar code labels on the side walls
- Space-saving and stackable
F16 and U16 Strip Plates

Microplates in strip format offer the advantage of greater flexibility in diagnostics. Individual strips can be removed from the support frame so that the number of tests to be performed can be adjusted to the number of samples, and is not predetermined by the microplate format used. In addition, the individual strips of a microplate can be subjected to a wide variety of different test conditions....
Microplates BRANDplates® hydroGrade™

BRANDplates
® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Immunological surfaces. Strongly hydrophilic, high affinity to hydrophilic molecules like e.g., glycoproteins and peptides, antibodies with predominantly hydrophilic regions and nucleic acids....
Microplates BRANDplates® immunoGrade™

BRANDplates
® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Immunological surfaces. High-binding. Optimized for the immobilisation of IgG, highest binding capacity for molecules with mixed hydrophilic and hydrophobic regions, standard ELISA assay....
Microplates BRANDplates® immunoGrade™, with transparent bottom

BRANDplates
® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Immunological surfaces. High-binding. Optimized for the immobilisation of IgG, highest binding capacity for molecules with mixed hydrophilic and hydrophobic regions, standard ELISA assay....
Lids for BRANDplates® microplates

To protect samples, reaction batches or cell cultures from both contamination and evaporation, compatible lids are available for all BRAND plates ® microplates. The lids are made of crystal-clear polystyrene. They are optimally matched to the corresponding BRAND plates ®...
Microplates BRANDplates® lipoGrade™

BRANDplates
® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Immunological surfaces. Strongly hydrophobic (lipophilic), immobilisation of biomolecules with predominantly hydrophobic regions. For the immobilisation of molecules, such as lipoproteins or peptides....
Microtitration plates

Compatible with most microtitration plate centrifuges.
- For volumes up to 300 µl
- U-bottom wells
- Autoclavable at 121 °C (2 bar), according to DIN EN 285
- High chemical resistance (e.g. phenol, chloroform, DMSO)
- Recessed hollows between the wells minimize contamination
- Raised rings (rims) around the orifice of each well for easy sealing using self-adhesive sealing films
- Plates can be sealed with self-adhesive, alphanumerically coded, DMSO-resistant, sealing film (cross-cut)
Sealing Films, self-adhesive

In case the microplates, PCR- and Deep well plates need not only to be covered, but also securely sealed, self-adhesive sealing films are available. These film sheets can be easily applied on the plates and removed also without the use of expensive equipment....
96/384 Well Plates and Modules CovaLink™ and Immobilizer Streptavidin, PS

Microtiter plates for immunoassays with surfaces for affinity binding (passive streptavidin and immobilizer streptavidin, nickel chelate and glutathione, BioBind).
- Streptavidin-biotin interaction for a broad range of biomolecules
- Highly specific binding surface
- Improvement of the signal-to-noise ratio
- 96 well plate: Working volume 100 µl/well, total volume 350-400 µl/well
- 384 well plate: Working volume 50 µl/well, total volume 120 µl/well
Microplates BRANDplates® pureGrade™, with transparent bottom

BRANDplates
® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. The standard plate for most applications. Particularly applicable for homogenous assays, screening, and in the field of storage....
Microplates BRANDplates® pureGrade™, 384/1536-well

BRANDplates
® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. The standard plate for most applications. Particularly applicable for homogenous assays, screening, and in the field of storage....
Microplates BRANDplates® pureGrade™ S, with transparent bottom

BRANDplates
® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. Sterilised via ß-radiation. Especially suited for bacteriological assays.
- Sterile
- Individually packed
- Grey or embossed alphanumeric coding
- ANSI/SLAS format
Strip plates 12 x F8 BRANDplates®, pureGrade™, without grid

BRANDplates
® 96-well strip plates offer ideal visual properties and are produced according to ANSI/SLAS standards. They offer excellent flexibility. Only as many cavities as necessary are used.
Medium binding capacity (medium-binding).
For processing 12 strips of 8 wells each. Individual strip can be removed from the frame and reinserted. The strips are not divisible....
Strip plates 12 x F8 BRANDplates®, pureGrade™, with grid

BRANDplates
® 96-well strip plates offer ideal visual properties and are produced according to ANSI/SLAS standards. They offer excellent flexibility. Only as many cavities as necessary are used.
Medium binding capacity (medium-binding).
12 strips of 8 wells each. Individual strips are removable from the plate and can be reinserted. The strips can be divided into 8 individual vessels and can be inserted individually into the frame plate....
Strip plates 12 x F8 BRANDplates®, immunoGrade™, without grid

BRANDplates
® 96-well strip plates offer ideal visual properties and are produced according to ANSI/SLAS standards. They offer excellent flexibility. Only as many cavities as necessary are used.
High binding capacity (highbinding), ideal for IgG and molecules with hydrophobic and hydrophilic regions....
Strip plates 12 x F8 BRANDplates®, immunoGrade™, with grid

BRANDplates
® 96-well strip plates offer ideal visual properties and are produced according to ANSI/SLAS standards. They offer excellent flexibility. Only as many cavities as necessary are used.
High binding capacity (highbinding), ideal for IgG and molecules with hydrophobic and hydrophilic regions....
Terasaki Plates - 60 Well and 72 Well

Greiner Bio-One Terasaki plates are suitable for all applications for serological determination of HLA antigens. The serological determination of HLA proteins of the HLA-A, -B, -C and -DR genetic positions is primarily performed with the complement-dependent microlymphocytotoxicity test (LCT) or Terasaki test, which has been standardised since 1964. The basis for this test method is the cytolysis of the lymphocytes to be tested, which is caused by the antibody-antigen mediated activation of the complement system. Permeabilised lymphocytes are generally stained with chromophores or fluorophores and evaluated microscopically....
V96 MicroWell™ Plates, PS

Clear plates with V-shaped well bottom for maximized sample recovery. The wells have raised rims and lids are supplied with rings, which prevent cross contamination. Applications include: antibiotic screens, serological tests, storing and screening compounds and DNA libraries.
Material plates: Polystyrene...
96-Well Optical-Bottom plates, with CC2™ surface
Achieve optimal results in cell-based fluorescence and luminescence applications using the Thermo Scientific™ Nunc™ 96-Well Optical-Bottom plates with coverglass base. Signals are intensified through the highly optically clear coverglass bottom due to improved signal-to-noise ratios....
96-Well Optical-Bottom plates, for cell-based assays
Achieve optimal results in cell-based fluorescence and luminescence applications using the Thermo Scientific™ Nunc™ 96-Well Optical-Bottom plates with coverglass base. Signals are intensified through the highly optically clear coverglass bottom due to improved signal-to-noise ratios....
96-Well Optical-Bottom plates
Achieve optimal results in cell-based fluorescence and luminescence applications using the Thermo Scientific™ Nunc™ 96-Well Optical-Bottom plates with coverglass base. Signals are intensified through the highly optically clear coverglass bottom due to improved signal-to-noise ratios....
Modules Immuno LockWell, PS, breakable, white and black

Modules in standard 96-well frames. The white and black immuno breakable modules are specially designed for fluorometric and luminometric immunoassays. Each well snaps into the frame and maintains the same height for accurate reading and efficient washing. Black plates for fluorescence measurements, white plates for luminescence detection....
96 Well Plates and Modules CovaLink™ and Immobilizer Amino, PS

Microtiter plates for immunoassays with surfaces for covalent binding. With the main orientation towards peptides. Working volume 100 µl/well, total volume 350-400 µl/well.
- Minimal washout
- Resistant to heavy rinsing
- Controlled alignment
Deep-Well Plates Protein LoBind, 96/384-well, PP

Protein LoBind plates are specially designed for proteomics and other areas of protein research. Suitable for preparation or storage of protein, peptide or antibody samples, enzymatic assays, storage of virus stock solutions or cell suspensions and sample processing in toxicology.
- High-contrast, alphanumeric lettering
- Frame white or yellow
- Rounded RecoverMax®-Well-Design
- Elevated well frames for reliable sealing
- PCR clean: free of human DNA, DNase, RNase and PCR inhibitors
F8 Strip Plates

Microplates in strip format offer the advantage of greater flexibility in diagnostics. Individual strips can be removed from the support frame so that the number of tests to be performed can be adjusted to the number of samples, and is not predetermined by the microplate format used. In addition, the individual strips of a microplate can be subjected to a wide variety of different test conditions....