ELISA

Non sterile Immuno plates with transparent flat bottom, well suited for quantitative and qualitative solid phase immunoassays.

Choice of different surfaces:
PolySorp™, Immulon™ 1B and Universal Binding (UB) serve to absorb hydrophobic molecules.
Medisorp™ and Immulon 2HB are slightly hydrophilic and bind a variety of biomolecules.
MaxiSorp™, Immulon 4 HBX and Enhanced Bond (EB) are hydrophilic and ideal for antibody sandwich assays.
MultiSorp is highly hydrophilic and is well suited for glycans and water-soluble proteins.

• Reliable and repeatable results in colourimetric assays
• Very good optical quality
• Alphanumerically labeled rows and columns

Clear plates with excellent optical quality and round well bottom.

Nunclon™Δ surface optimized for cell based assays and sterile non-treated versions for bacteriological applications. Certified.

Effectively seals all microplate formats for storage, PCR, microscopy, culture and protection. Pre-cut, plate-sized sheets.

Type 1) General use, PCR, storage, photo-sensitive samples
Type 2) Cell Culture, sterile applications
Type 3) Microscopy, good optics, low auto-fluorescence, DMSO compatible
Type 4) Breathable, cell culture

Clear, white or black plates with excellent optical clarity and flat bottom wells. Nunclon™Δ, MaxiSorp™, PolySorp™, Collagen I, Poly-D-Lysine surface modifications suitable for cell culture assays.
Material plates: Polystyrene
Total volume µl/well: 400

BRANDplates^® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. The standard plate for most applications. Particularly applicable for homogenous assays, screening, and in the field of storage.

• Non-sterile
• Grey or embossed alphanumeric coding
• ANSI/SLAS format

We set high standards on the quality of our immunological products, especially on consistency and reproducibility of binding properties. The incoming raw material used for ELISA microplates is routinely monitored for identity and immunological quality. All ELISA are ideally suited for optical measurements. Two surface qualities offers for ELISA
microplates: the hydrophilic high binding products and the less hydrophilic medium binding products.

Proporties:

• Manufactured from crystal clear polystyrene
• Compatible with automated systems
• High-throughput manner
• Cost-effective
• Results rapid available

Transparent modules in standard 96-well frames.

• Standard format 128 x 86 mm
• High optical quality for reliable results
• Free-standing modules with easy handling
• Alphanumeric system for better orientation

Developed for quantitative and qualitative solid phase immuno assays, e.g. ELISA techniques.

• Alphanumeric orientation systems
• Standard format 128 x 86 mm
• High optical quality
• Four choices for bottom: flat bottom (F), round b. (U), flat with curved b. (C) or StarWell™
• Frames and modules available separately
• Modules remain in frame when inverted
• Certified reproducibility of binding
• Free-standing modul

Microplates in strip format offer the advantage of greater flexibility in diagnostics. Individual strips can be removed from the support frame so that the number of tests to be performed can be adjusted to the number of samples, and is not predetermined by the microplate format used. In addition, the individual strips of a microplate can be subjected to a wide variety of different test conditions.

Proporties:

• Strips mounted in frame
• C-Bottom:flat-bottom profile with rounded corners
• 12 x 8 matrix on request
• Individual wells precisely adjusted of tests
• well rim additionally with a red, green, blue or yellow colour coding

• C-shaped bottom for optimal washing and liquid retrieval
• FluoroNunc™ for fluorescence based immuno assays with minimal auto-fluorescence
• MaxiSorp™ for quantitative and qualitative solid phase immuno assays

• C-shaped bottom for optimal washing and liquid retrieval
• FluoroNunc™ for fluorescence based immuno assays with minimal auto-fluorescence
• MaxiSorp™ for quantitative and qualitative solid phase immuno assays

• C-shaped bottom for optimal washing and liquid retrieval
• FluoroNunc™ for fluorescence based immuno assays with minimal auto-fluorescence
• PolySorp™ for quantitative and qualitative solid phase immuno assays
• Certified

Deep-well plates from Ratiolab are available as standard or low profile version with different volumes from 1,2 to 4,6 ml for each well.

• Available with U-bottom (low profile + standard) and as V-bottom version
• SBS standard micro test plate format
• Wells with significantly larger cross section for reduced cross-contamination
• Improved visual control due to clear polypropylene
• 1,2 ml low profile is about half as high as conventional deep-well plates
• 30 % less storage space when using low profile plates
• Autoclavable at 121 °C, 20 min
• Temperature resistant to -80 °C
• 8 x 12 wells with alphanumeric code in micro test plate format
• Precise design, for use in automatic pipetting systems for High Throughput Screening (HTS)
• Optimum space for bar code labels on the side walls
• Space-saving and stackable

Microplates in strip format offer the advantage of greater flexibility in diagnostics. Individual strips can be removed from the support frame so that the number of tests to be performed can be adjusted to the number of samples, and is not predetermined by the microplate format used. In addition, the individual strips of a microplate can be subjected to a wide variety of different test conditions.

Proporties:

• Strips mounted in frame
• U-Bottom: no corners, therefore simple and clean pipetting
• F-Bottom: ideal for the most precise optical measurements
• Black and white on request

BRANDplates^® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Immunological surfaces. Strongly hydrophilic, high affinity to hydrophilic molecules like e.g., glycoproteins and peptides, antibodies with predominantly hydrophilic regions and nucleic acids.

• Non-sterile
• Blue or embossed alphanumeric coding on 96-well standard plates
• Free from endotoxins (< 0.01 EU/ml), DNase, DNA, RNase, non-cytotoxic (according to ISO 10993)
• ANSI/SLAS format

BRANDplates^® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Immunological surfaces. High-binding. Optimized for the immobilisation of IgG, highest binding capacity for molecules with mixed hydrophilic and hydrophobic regions, standard ELISA assay.

• Non-sterile
• Blue or embossed alphanumeric coding on 96-well standard plates
• Free from endotoxins (< 0.01 EU/ml), DNase, DNA, RNase, non-cytotoxic (according to ISO 10993)
• ANSI/SLAS format

BRANDplates^® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Immunological surfaces. High-binding. Optimized for the immobilisation of IgG, highest binding capacity for molecules with mixed hydrophilic and hydrophobic regions, standard ELISA assay.

• Non-sterile
• Blue or embossed alphanumeric coding on 96-well standard plates
• Free from endotoxins (< 0.01 EU/ml), DNase, DNA, RNase, non-cytotoxic (according to ISO 10993)
• ANSI/SLAS format

Lids in various versions made of clear, strong polystyrene with notches for quick orientation. Reduce water loss due to lower evaporation. 96-well lids feature individual condensation rings.

To protect samples, reaction batches or cell cultures from both contamination and evaporation, compatible lids are available for all BRANDplates^® microplates. The lids are made of crystal-clear polystyrene. They are optimally matched to the corresponding BRANDplates^® microplates, so that plates with lids can also be stacked. The cut-corner sets the orientation of the lid. CERTIFIED LIFE SCIENCE QUALITY.

BRANDplates^® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Immunological surfaces. Strongly hydrophobic (lipophilic), immobilisation of biomolecules with predominantly hydrophobic regions. For the immobilisation of molecules, such as lipoproteins or peptides.

• Non-sterile
• Blue or embossed alphanumeric coding on 96-well standard plates
• Free from endotoxins (< 0.01 EU/ml), DNase, DNA, RNase, non-cytotoxic (according to ISO 10993)
• ANSI/SLAS format

Compatible with most microtitration plate centrifuges.

• For volumes up to 300 µl
• U-bottom wells
• Autoclavable at 121 °C (2 bar), according to DIN EN 285
• High chemical resistance (e.g. phenol, chloroform, DMSO)
• Recessed hollows between the wells minimize contamination
• Raised rings (rims) around the orifice of each well for easy sealing using self-adhesive sealing films
• Plates can be sealed with self-adhesive, alphanumerically coded, DMSO-resistant, sealing film (cross-cut)

In case the microplates, PCR- and Deep well plates need not only to be covered, but also securely sealed, self-adhesive sealing films are available. These film sheets can be easily applied on the plates and removed also without the use of expensive equipment.

Microtiter plates for immunoassays with surfaces for affinity binding (passive streptavidin and immobilizer streptavidin, nickel chelate and glutathione, BioBind).

• Streptavidin-biotin interaction for a broad range of biomolecules
• Highly specific binding surface
• Improvement of the signal-to-noise ratio
• 96 well plate: Working volume 100 µl/well, total volume 350-400 µl/well
• 384 well plate: Working volume 50 µl/well, total volume 120 µl/well

BRANDplates^® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. The standard plate for most applications. Particularly applicable for homogenous assays, screening, and in the field of storage.

• Non-sterile
• Grey or embossed alphanumeric coding
• ANSI/SLAS format

BRANDplates^® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. The standard plate for most applications. Particularly applicable for homogenous assays, screening, and in the field of storage.

• Non-sterile
• Grey or embossed alphanumeric coding
• ANSI/SLAS format

BRANDplates^® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. The standard plate for most applications. Particularly applicable for homogenous assays, screening, and in the field of storage.

• Non-sterile
• Grey or embossed alphanumeric coding
• ANSI/SLAS format

BRANDplates^® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. Sterilised via ß-radiation. Especially suited for bacteriological assays.

• Sterile
• Individually packed
• Grey or embossed alphanumeric coding
• ANSI/SLAS format

BRANDplates^® microplates are manufactured under ISO class 7 cleanroom conditions. This ensures the highest possible purity, even for non-sterilized assay plates.
Non-treated surface. Sterilised via ß-radiation. Especially suited for bacteriological assays.

• Sterile
• Individually packed
• Grey or embossed alphanumeric coding
• ANSI/SLAS format

BRANDplates^® 96-well strip plates offer ideal visual properties and are produced according to ANSI/SLAS standards. They offer excellent flexibility. Only as many cavities as necessary are used.
Medium binding capacity (medium-binding).
For processing 12 strips of 8 wells each. Individual strip can be removed from the frame and reinserted. The strips are not divisible.

BRANDplates^® 96-well strip plates offer ideal visual properties and are produced according to ANSI/SLAS standards. They offer excellent flexibility. Only as many cavities as necessary are used.
Medium binding capacity (medium-binding).
12 strips of 8 wells each. Individual strips are removable from the plate and can be reinserted. The strips can be divided into 8 individual vessels and can be inserted individually into the frame plate.

BRANDplates^® 96-well strip plates offer ideal visual properties and are produced according to ANSI/SLAS standards. They offer excellent flexibility. Only as many cavities as necessary are used.
High binding capacity (highbinding), ideal for IgG and molecules with hydrophobic and hydrophilic regions.
For processing 12 strips of 8 wells each. Individual strip can be removed from the frame and reinserted. The strips are not divisible.

BRANDplates^® 96-well strip plates offer ideal visual properties and are produced according to ANSI/SLAS standards. They offer excellent flexibility. Only as many cavities as necessary are used.
High binding capacity (highbinding), ideal for IgG and molecules with hydrophobic and hydrophilic regions.
12 strips of 8 wells each. Individual strips are removable from the plate and can be reinserted. The strips can be divided into 8 individual vessels and can be inserted individually into the frame plate.

Greiner Bio-One Terasaki plates are suitable for all applications for serological determination of HLA antigens. The serological determination of HLA proteins of the HLA-A, -B, -C and -DR genetic positions is primarily performed with the complement-dependent microlymphocytotoxicity test (LCT) or Terasaki test, which has been standardised since 1964. The basis for this test method is the cytolysis of the lymphocytes to be tested, which is caused by the antibody-antigen mediated activation of the complement system. Permeabilised lymphocytes are generally stained with chromophores or fluorophores and evaluated microscopically.

Proporties:

• Manufactured from crystal clear polystyrene
• Individual wells have a volume of 10 μl
• 1 years stability on the surface treatment

Clear plates with excellent optical quality and round well bottom.

Clear plates with excellent optical quality and round well bottom.

MaxiSorp™ suitable for solid phase immuno assays. MaxiSorp™ is hydrophilic and ideal for antibody sandwich assays.

Clear plates with excellent optical quality and round well bottom.

PolySorp™ suitable for solid phase immuno assays. PolySorp™ serve to absorb hydrophobic molecules.

Clear plates with V-shaped well bottom for maximized sample recovery. The wells have raised rims and lids are supplied with rings, which prevent cross contamination. Applications include: antibiotic screens, serological tests, storing and screening compounds and DNA libraries.
Material plates: Polystyrene
Total volume µl/well: 300

• Conical flat bottom for cell culture or assays
• 25 µl total volume saves reagents
• Standard height provides optimal handling, barcoding
• Working volume range: 2-20 µl/well

• Small volume applications
• Round bottom wells for optimal sample recovery
• Working volume range: 2-35 µl/well

• Low binding surface
• Round bottom wells for optimal sample recovery
• Certified RNase/DNase-free
• Working volume range: 10-100 µl/well

For DNA and protein quantitation in 260 and 280 nm range.

Achieve optimal results in cell-based fluorescence and luminescence applications using the Thermo Scientific™ Nunc™ 96-Well Optical-Bottom plates with coverglass base. Signals are intensified through the highly optically clear coverglass bottom due to improved signal-to-noise ratios.

Achieve optimal results in cell-based fluorescence and luminescence applications using the Thermo Scientific™ Nunc™ 96-Well Optical-Bottom plates with coverglass base. Signals are intensified through the highly optically clear coverglass bottom due to improved signal-to-noise ratios.

Achieve optimal results in cell-based fluorescence and luminescence applications using the Thermo Scientific™ Nunc™ 96-Well Optical-Bottom plates with coverglass base. Signals are intensified through the highly optically clear coverglass bottom due to improved signal-to-noise ratios.

Modules in standard 96-well frames. The white and black immuno breakable modules are specially designed for fluorometric and luminometric immunoassays. Each well snaps into the frame and maintains the same height for accurate reading and efficient washing. Black plates for fluorescence measurements, white plates for luminescence detection.

• Bottom C-shaped
• Standard format 128 x 86 mm
• High optical quality for reliable results
• Free-standing modules with easy handling
• Alphanumeric system for better orientation

Microtiter plates for immunoassays with surfaces for covalent binding. With the main orientation towards peptides. Working volume 100 µl/well, total volume 350-400 µl/well.

• Minimal washout
• Resistant to heavy rinsing
• Controlled alignment

Protein LoBind plates are specially designed for proteomics and other areas of protein research. Suitable for preparation or storage of protein, peptide or antibody samples, enzymatic assays, storage of virus stock solutions or cell suspensions and sample processing in toxicology.

• High-contrast, alphanumeric lettering
• Frame white or yellow
• Rounded RecoverMax^®-Well-Design
• Elevated well frames for reliable sealing
• PCR clean: free of human DNA, DNase, RNase and PCR inhibitors

White frames for the Immuno LockWell modules. Standard size 128 x 86 mm.

Clear plates with excellent optical quality and round well bottom.

Immulon™ 1B serve to absorb hydrophobic molecules.

Clear plates with excellent optical quality and round well bottom.

Thermo Scientific™ Immuno tubes are suitable for ELISA, solid phase RIA and liquid phase RIA assays. With two different surface options for optimal binding.
Thermo Scientific™ MaxiSorp™ is a hydrophilic surface optimized for the binding of IgG and also provides increased binding of many other proteins and biomolecules with hydrophilic/hydrophobic characteristics.
Thermo Scientific™ MiniSorp™ is a polyethylene based material that forms a low binding surface.

Tubes for liquid phase immunoassays: Includes RIA, for storage of reagents or collection of chromatographic fractions.

Tubes for solid phase immunoassays: Such as IRMA, ELISA and ILMA.

Tubes StarTube: Increase assay sensitivity and reduce incubation times. Recommended for ELISA, solid phase RIA assays, liquid phase RIA assays and sample storage.

For fluorescence and chemiluminescence assays, DNA- and protein concentration with absorbance or fluorescent dyes, cell based assays, cell viability and apoptosis assays. Black Eppendorf Microplates offer an good signal-to-noise ratio. White Eppendorf Microplates are optimized for highest sensitivity in the detection of luminescence signals by maximizing reflection.

Suitable for sample storage and preparation, protein analysis and genotyping.

• High-contrast, alphanumeric lettering
• Wells transparent with white frame
• Rounded RecoverMax^®-Well-Design
• Elevated well frames for reliable sealing, even with heat sealing
• Temperaturresistance from -86 °C to 100 °C
• Autoclavable (121 °C, 20 min)
• Centrifugation resistance up to 6000 × g
• PCR clean: free of human DNA, DNase, RNase and PCR inhibitors

Durapore® PVDF membranes are characterized by high throughput and high flow rate. To maximize recovery and minimize interaction with your sample, the membrane has very low protein binding.

Features & Benefits:

• Chemical compatibility
• Automation compatible
• Suitable for: Receptor/Ligand Binding Assay, Protein Kinase/Phosphatase Precipitation Assays, Bead-Based Assay

Transparent polystyrene microtiter plates for almost all microvolume applications, such as high-throughput screenings, research applications, storage, sample or reagent transfer, serial dilution, hemagglutination, blood typing and complement fixation.

• Transparent plates for colourimetric applications
• Standard size 128 × 86 mm
• Different bottom shapes available

• V-shape provides optimal recovery of reagents
• Shared wall technology increases well volume and wider cells improve mixing
• Ideal as collection plate for Nunc Filter Plates
• Low binding for homogeneous assays and storage