GC consumables

GC syringes for all Perkin-Elmer autosampler e.g. Clarus. High reproducibility, low carry-over.

GC syringes for Agilent autosampler 7673, 7683 and 6850

• With fixed or removable needle
• Two different needle diameter and tapered needles
• High reproducibility, low carry-over

GC syringes for all Perkin-Elmer autosampler e.g. Clarus. High reproducibility, low carry-over.

Inlet Liner for Perkin-Elmer Autosystem and Clarus 500, 600. SGE's inlet liners come as a complete, single packed unit. 5 or 25 packs, individualy packed. Complete with instrument appropriate o-rings and sealing rings. Each pack supplied with quality test results.

Syringes for CTC Analytics CombiPal and GC PAL. High reproducibility, low carry-over.

70% Cyanopropyl Polysilphenylene-siloxane. Able to be solvent rinsed. Industry standard column for fatty acid methyl esters, carbonhydrates, pharmaceuticals, GC/MS applications. Suitable alternative to: DB-23, Rtx-2330, SP-2330, CP-Sil 88, SP2380, HP-23.

High quality ferrules made of 100 % Graphite.

Inlet Liner for Agilent 5890, 6850, 6890, 7890 und HP4890. Trajan's SGE inlet liners come as a complete, single packed unit.

• 5 or 25 packs, individually packed
• Complete with instrument appropriate o-rings and sealing rings
• Each pack is supplied with quality test results

Inlet liner with advanced coating technology. The OptChem™ deactivation is a unique thick film that ensures minimal sample loss and increased system sensitivity. Suitable for trace level analysis, detection of volatile and organochlorine pesticides (OCPs), persistent organic pollutants (POPs), brominated flame retardants (BFRs), as well as general GC applications.

• Colour coded by geometry
• Pre-fitted with CRS ONE O-rings
• Recyclable, touchless packaging reduces the risk of contamination during installation
• Quality tested acc. to USEPA 8081 (organochlorine pesticides) and USEPA 8270 (semivolatile organic compounds)

Liners come individually packed complete with instrument appropriate o-rings and sealing rings. Each pack is supplied with quality test results. Further liners und pack sizes available on request.

Liners come individually packed complete with instrument appropriate o-rings and sealing rings.
Each pack is supplied with quality test results.
Further liners und pack sizes available on request.

All Septa are made with a high grade silicone material to minimize needle coring. These new materials meet or exceed industry standards, giving you reassurance in the quality of your work. All of these Septa are durable with excellent resealing properties and excellent solvent resistance.

GP = General Purpose Silicone Septa for non-demanding routine applications up to 200°C.
EC = High Temperature Silicone Septa, for significantly longer injection life, low bleed and low injection port adhesion.
MN = High Temperature Premium Silicone Septa for autosamplers, up to 400 injections per septum.
HT = BTO Silicone Septa, Bleed and temperature optimized, combined with outstanding mechanical properties.

Also available: Septa for instruments from Perkin-Elmer, Shimadzu, Thermo and Varian/Bruker.

Syringes for CTC Analytics CombiPal and GC PAL. High reproducibility, low carry-over.

Syringes for CTC Analytics CombiPal and GC PAL. High reproducibility, low carry-over.

Syringes for CTC Analytics CombiPal and GC PAL.

• High reproducibility, low carry-over
• For Thermo TriPlus

GC syringes for Agilent autosampler 7673, 7683 and 6850

• With fixed or removable needle
• Two different needle diameter and tapered needles
• High reproducibility, low carry-over

For Shimadzu AOC-14, AOC-17, AOC-20 and AOC-20i. Needle tip: cone.
Article 6.205 989 with GT plunger.

Syringes for CTC Analytics HTS, HTC and LC PAL (needle tip: LC). Gastight.

Low density silicone was sandwiched between two high density silicone layers. Working temperature max. 200 °C.

Glass wool, quartz wool and glass fiber wadding are, e.g., used for GC liners, packed GC columns etc.

High quality ferrules made of 15% Graphite / 85% Vespel^®. Cat. No. 7.673 271 made of 100% Graphite.

High quality ferrules made of 15 % Graphite / 85 % Vespel^®.

The Gas and Vapor sampler enables spot collection of environmental gas samples or low pressure gas streams in 200 cm³ impervious resealable bags. Ideal for field analysis.

Scope of supply: Canister, Bulb, 10 bags, Marker Pen and Instructions

Gas filters are an essential part of GC analysis as contaminants in gases can significantly impact the quality of results. Oxygen, hydrocarbons and moisture can lead to problems such as noisy baselines, moisture entering the GC column and excessive bleed. The gas filter kit consists of a gas filter and a connection unit.

• Fast stabilization times
• The gas filter system consists of two key parts: the filters and the connecting unit
• The connecting unit has inlet and outlet connectors for the gas lines
• The connecting unit can be bench or wall-mounted
• Can be used in combination with other filters
• Indicator color change tells you when to change your filter

Preconditioned PTFE/silicone rubber septa. Maximum operatin gtemperature: 212 °C.

Low Bleed, High Temperature septa are designed for maximum GC/MS performance for the lowest bleed possible at temperatures up to 400 °C. Ideal for use with Mass Spectrometers or in applications where septa bleed interferes with trace analysis.

For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.

• Smooth inner surface
• Good chemical resistance
• Bio-inert and biocompatible
• Operating temperature up to max. 100 °C
• Pressure stable up to 483 bar (7000 psi, 48000 kPa), size dependent

One-piece spare cold traps made of borosilicate glass 3.3.

Versions of the cold trap connections:

• S 29 = spherical ground joint S 29
• O 29 = spherical ground joint S 29 with O-ring seal
• GL 18 = glass thread GL 18 with PTFE olive Ø 10 mm
• KF NW 16 or 25 = small vacuum flange KF NW 16 or 25

For Precision Hydrogen and Precision Hydrogen trace models.