HPLC accessories

Screw cap with free movable insert made of PP, with 4 lateral connectors GL45 and 3 centric capillary connectors (UNF 1/4"), incl. 3 blind fittings.

Flexible tube tags to identify capillaries and tubes capillaries and tubes by colour. For outer tube diameters from 0.4 to 6.35 mm. To write on with ball pens (removable) and permanent markers directly, or use with self-adhesive labels.
Assorted colours (5 colours per pack).

Equipaggiamenti iniziali per HPLC con b.safe-Caps per flaconi con filettatura GL 45. Sono inclusi anche raccordi per un facile collegamento di tubi capillari, raccordi ciechi per la chiusura di connessioni non utilizzate e valvole dell"aria per un prelievo senza problemi di solventi.

La Fornitura inlcude:
Scatola di avvio 1:

• 3 x b.safe-Cap GL 45 con 2 connessioni UNF ¼" 28G
• 1 x b.safe-Cap GL 45 con 3 connessioni UNF ¼" 28G
• 4 x valvola dell"aria con indicatore di durata
• 5 x raccordi gialli per tubi O.D. 3,2 mm
• 1 x raccordo cieco

• 4 x b.safe-Cap GL 45 con 3 connessioni UNF ¼" 28G
• 8 x valvola dell"aria con indicatore di durata
• 4 x raccordi gialli per tubi O.D. 3,2 mm
• 4 x raccordi ciechi

Up to 4 Safety Caps or Safety Waste Caps can be installed with the multiple bottle distributor.

• GL 45 (w) thread
• 4 x GL 45 (m) connections
• Electrically conductive
• Incl. 1 x blind cap

Scope of supply:
4 x Safety cap III, GL45
8 x air valve
1 x Safety waste cap, S60/61, electrostatic conductive
1 x Exhaust filter L, V3.0, with splash guard and change indicator, service life 12 month
1 x 5 l canister, HDPE-EL
1 x Grounding cable, 2 x clamp, L = 1,5 m
4 x Laboratory bottle DURAN, GL45, 1000 ml, clear glass, with cap and pouring ring
5 x PFA-fitting, 2.3 mm OD, violet
5 x PFA fitting, 1.6 mm OD, green
10 x PFA fitting, 3.2 mm OD, blue
10 x PFA blind plug
2 x hose connector, straight, 6 - 8 mm ID
1 x hose connector, curved, 5.0 - 11.5mm ID
1 x hose connector, angled, 9.5 - 10 mm ID

MINIPULS 3 tubes for R1, R2, R4 and R8 pump heads
MINIPULS evolution tubes for MF1, MF2 and HF2 pump heads

• Many different inner diameters
• Compatible connectors

Raccordi a tenuta stagna per tubi HPLC in PEEK.

For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.

• Smooth inner surface
• Good chemical resistance
• Bio-inert and biocompatible
• Operating temperature up to max. 100 °C
• Pressure stable up to 483 bar (7000 psi, 48000 kPa), size dependent

For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.

• Smooth inner surface
• Good chemical resistance
• Bio-inert and biocompatible
• Operating temperature up to max. 100 °C
• Pressure stable up to 483 bar (7000 psi, 48000 kPa), size dependent

For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.

• Smooth inner surface
• Good chemical resistance
• Bio-inert and biocompatible
• Operating temperature up to max. 100 °C
• Pressure stable up to 483 bar (7000 psi, 48000 kPa), size dependent

For use in LC, LCMS and automation technology. The polyetheretherketone (PEEK) tubing are a flexible alternative to stainless steel tubing in high pressure applications. The tubing are color coded to industry standards for easy identification of the inner diameter. They are inert to most commonly used solvents. Exceptions are very caustic reagents, strong acids and bases.

• Smooth inner surface
• Good chemical resistance
• Bio-inert and biocompatible
• Operating temperature up to max. 100 °C
• Pressure stable up to 483 bar (7000 psi, 48000 kPa), size dependent