Güvenlik kabini

Aluminum, powder coated. For holding gas cylinders up to 230 mm diameter in a vertical position. For benches/worktops up to 60 mm thick. Rapid release, safety catch.

Designed for small facilities or installations in which a number of fume hoods are needed, this unit is excellent for use in schools, junior colleges and universities.

• One-piece shell molded of chemical resistant polyethylene with rounded inside corners for easy cleaning
• Clear acrylic sash slides on a track featuring stop pins for open, closed or intermediate positions; bottom gap allows for continuous air flow
• Front opening (W x H): 560 x 300 mm
• Stepped exhaust duct can be used with either a 12 or 15cm diameter duct
• Overall dimensions (W x D X H): 690 x 330 x 560 mm
• Shipping weight: 17 kg

• safe and approved storage of aggressive, non-flammable hazardous materials in workrooms
• robust construction and longevity, safety elements assembled outside the storage compartment for increased protection against corrosion, easy to clean
• safe storage with two hermetically separated storage compartments
• doors lockable with cylinder locking (integration in locking system possible)
• integrated adjusting aids to compensate for uneven floor
• integrated metal-free air ducts ready for connection (NW 75) to a technical exhaust system with only one extraction air Inlet
• pull-out shelves: high quality and sturdy construction with removable plastic sump, load capacity 25 kg (evenly distributed load), capacity 15 litre

Supplied with: Cabinet for acids and alkalis SL-CLASSIC incl. interior equipment, Model SL.196.120.MV with 8 or 12 pull-out shelves, Model SL.196.060.MH with 4 or 6 pull-out shelves

A wide variety of cabinet versions is available. Please enquire.

Specifications
Outer dimensions (W x D x H) SL.196.120.MV: SL.196.60.MH:	1197 x 603 x 1965 mm 597 x 603 x 1965 mm
Inner dimensions (W x D x H) SL.196.120.MV: SL.196.60.MH:	2 x 485 x 570 x 1869 mm 2 x 485 x 570 x 914 mm
Weight SL.196.120.MV: SL.196.60.MH:	160 kg 125 kg

• safe and approved storage of non-flammable chemicals and toxic substances in workrooms
• robust construction and longevity, body made of sheet steel with high grade structured paint finish, colour: body anthracite grey RAL 7016, doors light grey (RAL 7035), door colour pure white(RAL 9010) available on request
• doors lockable with cylinder locking (integrated in the turning handle)
• integrated adjusting aids to compensate for uneven floor
• reduction of odours inside the cabinet with natural ventilation due to vent openings at the cabinet bottom
• doors optional with large glas openings for an optimal view on stored chemicals while doors are closed
• interior equipment sheet steel galvanised, pull-out shelf with sump made of PE

Shelves, height adjustable (25 mm increments), bottom collecting sump with perforated insert as a first storage level. Shelf load capacity (evenly distributed load): 100 kg (model width 1055 mm), 50 kg (model width 545 mm). Capacity bottom collecting sump: 33 litre (model width 1105 mm), 22 litre (model width 545 mm).

Supplied with: Cabinet for chemicals CS-CLASSIC Model CS.195.105 or CS.195.054 incl. interior equipment with 3 shelves, bottom collecting sump with perforated insert as a first storage area

A wide variety of cabinet versions is available. Please enquire.

Specifications
Outer dimensions (W x D x H) CS.195.105: CS.195.054:	1055 x 520 x 1950 mm 545 x 520 x 1950 mm
Inner dimensions (W x D x H) CS.195.105: CS.195.054:	996 x 496 x 1835 mm 486 x 493 x 1835 mm
Shelf dimensions (W x D x H) CS.195.105: CS.195.054:	993 x 492 x 30 mm 484 x 492 x 30 mm
Weight CS.195.105: CS.195.054:	68 kg 46 kg

• Safe handling of chemicals, protection from hazardous vapours and potentially explosive atmospheres
• Suitable for Pharmacies
• Easily mounted on a table top
• Robust construction made of chemically resistant, antibacterial powder-coated sheet steel
• Testing of the air equipment by recognized test institute

Standard equipment:

• Exhaust air fan
• Monitoring electronics with visual and audible alarm
• Stepless height adjustable front sash made from acrylic glass
• Workplace light
• 2 sockets

Compact, energy saving fume hood without ducting system.

• Independently tested and complies with AFNOR NFX 15-211 standard
• Easy Filter Change
• Average Inflow Air Velocity: 0,4m/s
• Sentinel-Microprocessor with LCD-Display, air velocity alarm and 24-hour-clock
• Fluorescent lighting provides superior illumination of the work zone
• Tempered glass sliding sash
• Tempered glass side panel
• ISOCIDE™ antimicrobial coating on all painted surfaces minimizes contamination.
• Stainless steel worktop

Model variations:
Model type B: Pre-filter, main filter (activated carbon, different filter types available)
Model type C: Pre-filter, main filter (activated carbon, different filter types available), back-up filter (activated carbon, different filter types available)
Model type E: Pre-filter, main filter (activated carbon, different filter types available), back-up filter (HEPA filter)

Options on request:
Filter, electrical outlet, VOC sensor, service fixture, swan-neck faucet, Drip Cup (PP), support stand, installation

For operation the main filters and the back-up filter (Modell type C) have to be ordered separately.

Same user benefits as 12X series, with classical design and corrosive protection (optional).

Supplied with:

• Filtration box (Types H50 and CORG51) with "universal CORG charcoal filter"
• Retention shelves adjustable in height; retentions tanks; transparent framed doors
• Special protection for corrosives (optional)

• colour: grey RAL 7035
• exhaust air connection (NW75) on top of the cabinet
• adjusting aids to compensate for uneven floor
• large interior height of 1858mm (Model for two 10 litre bottles interior height of 1246mm)
• lead-through points for pipes, sensors etc. in the ceiling of the cabinet
• complete with mounting rails, rolling ramp, bottle retainer with ratchet straps

Approved and safe

• labelling in accordance with EN 14470-2, fire resistance of 90 minutes
• GS approved

To EN ISO 2503. Valve body and cap made of high quality, hot-pressed brass. Provide sensitive adjustment of working pressure. Safety valve blows off upwards.