Deep-well plader

The LABSOLUTE® Deep well Plates meet all the important requirements for a wide variety of applications in cell culture, pharmacy and molecular biology. In addition to the long-term storage of samples, the deep well plates are suitable for a variety of other applications such as cultivation of microorganisms, screening tests and extraction of nucleic acids and proteins.

• The plates are made of 100 % pure polymer without additives
• Manufactured in a class 8 clean room
• Free of RNase, DNase, human DNA, endotoxins, PCR inhibitors and ATP
• Due to the precise production according to ANSI/SLAS 2004 standard, the plates are ideally suited for use with robots and automated liquid handling systems.
• The plates made of PP offer high chemical resistance (e.g. to DMSO) and are autoclavable at 121 °C.

Accessories Sealing mats for deep well plates Accessories PCR adhesive foils

The LABSOLUTE® sealing mats for deep well plates protect the samples against contamination and evaporation. The alphanumeric grid allows easy sample identification.

Accessories Deep well plates, PP and PS

• 384 square wells
• Pyramidal well bottom for optimal sample retrieval
• Raised rims for optimal sealing and reduced risk of cross-contamination
• Raised rims on the corners to protect edges of seals
• Chemical resistant (e.g. against DMSO, Phenol, Chloroform)
• Autoclavable (121 °C)
• Virgin polypropylene
• Certified RNase, DNase and endotoxin free
• Produced in a cleanroom environment

Alternative

Suitable for test preparation and for storage and transport of samples.

• Clear
• Produced under clean room conditions
• Compatible with automated systems
• RNase und DNase free

Developed for a range of uses, e.g. High-Throughput Screening (HTS), general analysis which requires a master reservoir plate, cell and tissue culture, sample storage, etc. Deep well plates can be used with all leading robotic systems and other autosampling devices.

• 96 well: 12 x 8 array, 384 well: 24 x 16 array
• High chemically-resistant polypropylene (e.g.: against DMSO, phenol, chloroform)
• ANSI/SLAS format
• Alphanumeric well coding
• Plates suitable for freezing down to -80°C (PP) or -20°C (PS)
• One notched corner ensures correct orientation.
• Stackable
• DNA-, RNase-, DNAse -free

Accessories Sealing mats

The 0,5 ml and 2 ml MASTERBLOCK® are ideal microplates for storing non-human sample material but are also ideal for cultivating bacteria or yeast. Their most important properties are biological inertness, resistance to numerous solvents commonly used in the laboratory, such as DMSO and temperature resistance from -196 °C to +121 °C.

Properties:

• Uniform external dimensions and tolerances
• Alphanumeric well coding
• Sealable with adhesive films and heat sealer
• Sealable with CapMats
• Available sterile or non-sterile
• Barcode-labelled on request

The 1 ml MASTERBLOCK® are ideal microplates for storing non-human sample material but are also ideal for cultivating bacteria or yeast. Their most important properties are biological inertness, resistance to numerous solvents commonly used in the laboratory, such as DMSO and temperature resistance from -196 °C to +121 °C.

Properties:

• Uniform external dimensions and tolerances
• Alphanumeric well coding
• Sealable with adhesive films and heat sealer
• Sealable with CapMats
• Available sterile or non-sterile
• Barcode-labelled on request

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding

Each of the 96 reservoirs contains an elevated platform with either one or three crystallisation wells. The plates are optimised for sealing with VIEWseal™ and AMPLIseal™ adhesive film. All CrystalQuick™ plates are available in an LBR version for the use of polarised light.

Properties:

• Alphanumeric well coding
• Suitable for automated applications
• Crystallisation plates for sitting drop applications with different well profiles and material properties

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• Reduction of sample volume by up to 50 %
• Standardised pathlength (1 cm=170 μl, 0.5 cm=80 μl)
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

The use of the 96 well format allows the scale up of basic PCR work, while the 384 well format is ideal for high-throughput screening projects.

Properties:

• Ultra thin polypropylene for optimal heat transfer from the thermoblock to the reaction solution
• Free of detectable DNase, RNase, human DNA
• Non-Pyrogenic
• Sealable with sealers SILVERseal™ , VIEWseal™ and AMPLIseal™ or with compatible 8-cap strips
• For Research Use Only, not for use in diagnostic procedures, unless otherwise indicated

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need.

Properties:

• Uniform external dimensions
• Well-to-well spacing 9 mm
• Alphanumeric well coding
• High chemical resistance
• High temperature resistance (-196 °C to +121 °C)
• Sealable with adhesive films and heat sealer
• Sealable with CapMats

Minimize plate evaporation through the uniquely engineered design of Thermo Scientific™ Nunc™ Edge-96 Well Plate. The edge plate is engineered for optical superiority allowing your automated imaging systems to operate efficiently. The plates are made of clear polystyrene for excellent optical properties making it ideal for optical measurements
Features:

• Reduced Edge Effect virtually eliminates evaporation in lengthy incubations
• Overall plate evaporation rate reduced to <2% after seven days of incubation
• Low evaporation permits full-plate results
• Large evaporative buffer zones eliminate well-to-well variability
• Perimeter moat can be filled with 1.7mL sterile H2O or media
• Low background fluorescence, ideal for optical instruments
• Ideal for image-based high content applications like measuring primary neuron cultures
• Customized bar coding available (upon request)

The Matrix™ SepraSeal sealing mats are suitable for securely sealing sample tubes with or without 2D code. For sample access, the caps can be removed with the practical cap removal tool (Cat.-No. 6.254 390, please order seperately) or pierced once. The pre-slit versions are suitable for multiple piercing. The self-sealing function of the pre-slitted elastomer maintains sample integrity.

• For storage down to -20 °C
• Individual closure or closure of 96 sample tubes simultaneously possible
• Good chemical resistance
• Low evaporation rate

With the Matrix™ DuraSeal sealing mat (Cat.-No. 4.658 312), sample tubes are permanently sealed. The sealing mat is pre-slit for sample access and has a v-shaped design. The special elastomer ensures that the integrity of the sample is maintained. Suitable for sample storage down to -80 °C.

The CELLCOAT® product line comprises cell culture vessels which are coated with proteins of the extracellular matrix or synthetic proteins. Beside an improved adhesion and proliferation of primary cells and various cell lines. CELLCOAT® plates are highly suitable for serum-free and serum-reduced cell cultivation. Experiments which include additional washing steps or stressful procedures, e.g. transfection. Moreover, the differentiation of individual cell types can be enhanced through the protein-coating.
Collagen Type I is a protein of the extracellular matrix, an intercellular substance which in vivo influences adhesion, migration and proliferation among other processes. Collagen Type I represents one of the most important ECM proteins for in-vitro cell cultures.

Proporties:

• difficult-to-cultivate cells adhere show a positive growth behaviour
• positive influence on differentiation and morphology
• Cell culture flasks with filter caps
• Shelf life: 24 months at room temperature
• Further cell culture vessels coated with Collagen Type I available on request

Deep-well plates from Ratiolab are available as standard or low profile version with different volumes from 1,2 to 4,6 ml for each well.

• Available with U-bottom (low profile + standard) and as V-bottom version
• SBS standard micro test plate format
• Wells with significantly larger cross section for reduced cross-contamination
• Improved visual control due to clear polypropylene
• 1,2 ml low profile is about half as high as conventional deep-well plates
• 30 % less storage space when using low profile plates
• Autoclavable at 121 °C, 20 min
• Temperature resistant to -80 °C
• 8 x 12 wells with alphanumeric code in micro test plate format
• Precise design, for use in automatic pipetting systems for High Throughput Screening (HTS)
• Optimum space for bar code labels on the side walls
• Space-saving and stackable

Screening, sample storage et al. Ritter Riplate^® systems are in line with the SBS-standard and are suitalbe for automation systems with corresponding closing- and sealing-mechanism.
Raised wells reduce the risk of cross-contamination and increase the security of hot sealing or sealing with adhesive foils. Riplate^® 1ml is ideal for use in a thermocycler or for defrosting of samples in a hot-water bath. The U-shaped well bottom reduces the death-volume.

Accessories Cap mats for Deep-well plate system, Riplate®

Screening, sample storage et al. Ritter Riplate^® systems are in line with the SBS-standard and are suitalbe for automation systems with corresponding closing- and sealing-mechanism.
Riplate^® SW have been developed for optimal use of capacity when it comes to sample storage. Due to the SBS-format the outside dimensions of Riplate® are given. Form follows function: the construction of cavities is crucial for a maximum absorption of liquids.

Accessories Cap mats for Deep-well plate system, Riplate®

Screening, sample storage et al. Ritter Riplate^® systems are in line with the SBS-standard and are suitalbe for automation systems with corresponding closing- and sealing-mechanism.
Due to the compact construction of Riplate^® medio less than 50 % stacking size is needed. Higher well rims allow an airtight closure or sealing of Riplate^® medio. The alphanumeric marking allows registration and identification of single assays.

Accessories Cap mats for Deep-well plate system, Riplate®

High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.

• Clear wells
• Frame, white or coloured
• High-contrast, alphanumeric lettering
• Autoclavable (121 °C, 20 min)
• Centrifugation resistance up to 6000 × g
• Rounded RecoverMax^®-Well-Design
• Elevated well frames for reliable sealing, even with heat sealing
• Stackable
• PCR clean: free of human DNA, DNase, RNase and PCR inhibitors

Alternative Deep-Well Plates, 96/384-well, PP, with barcode, PCR clean Alternative Deep-Well Plates, 96/384-well, PP, sterile

High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.

• Clear wells
• Frame, white or coloured
• High-contrast, alphanumeric lettering
• Autoclavable (121 °C, 20 min)
• Centrifugation resistance up to 6000 × g
• Rounded RecoverMax^®-Well-Design
• Elevated well frames for reliable sealing, even with heat sealing
• Stackable

Alternative Deep-Well Plates, 96/384-well, PP, with barcode, PCR clean

96 well CapMats with round naps are suitable for sealing the 1 ml and 0.5 ml 96 well MASTERBLOCK®, in addition to standard 96 well polypropylene microplates. The 96 well F-, U- and μClear®-bottom polystyrene microplates may also be sealed (except 96 well V-bottom polystyrene microplates). These CapMats are not pierceable. 96 well CapMats with square naps are suitable for the 2 ml 96 well MASTERBLOCK®. These CapMats are not pierceable.

Properties:

• Available non-sterile or sterile
• Resistant to DMSO
• Temperature range between -20 °C and +60 °C
• Free of detectable DNase, RNase, human DNA
• Non-Pyrogenic
• Ideal for Real Time PCR

Non sterile Immuno plates with transparent flat bottom, well suited for quantitative and qualitative solid phase immunoassays.

Choice of different surfaces:
PolySorp™, Immulon™ 1B and Universal Binding (UB) serve to absorb hydrophobic molecules.
Medisorp™ and Immulon 2HB are slightly hydrophilic and bind a variety of biomolecules.
MaxiSorp™, Immulon 4 HBX and Enhanced Bond (EB) are hydrophilic and ideal for antibody sandwich assays.
MultiSorp is highly hydrophilic and is well suited for glycans and water-soluble proteins.

• Reliable and repeatable results in colourimetric assays
• Very good optical quality
• Alphanumerically labeled rows and columns

Accessories Lids for 96-well and 384-well Plates Accessories Sealing Tapes for MultiWell Plates

Microtiter plates for immunoassays with surfaces for affinity binding (passive streptavidin and immobilizer streptavidin, nickel chelate and glutathione, BioBind).

• Streptavidin-biotin interaction for a broad range of biomolecules
• Highly specific binding surface
• Improvement of the signal-to-noise ratio
• 96 well plate: Working volume 100 µl/well, total volume 350-400 µl/well
• 384 well plate: Working volume 50 µl/well, total volume 120 µl/well

Developed for quantitative and qualitative solid phase immuno assays, e.g. ELISA techniques.

• Alphanumeric orientation systems
• Standard format 128 x 86 mm
• High optical quality
• Four choices for bottom: flat bottom (F), round b. (U), flat with curved b. (C) or StarWell™
• Frames and modules available separately
• Modules remain in frame when inverted
• Certified reproducibility of binding
• Free-standing modul

Choice of different surfaces:
PolySorp™, Immulon™ 1B and Universal Binding (UB) serve to absorb hydrophobic molecules.
Medisorp™, and Immulon 2HB are slightly hydrophilic and bind a variety of biomolecules.
MaxiSorp™, Immulon 4 HBX and Enhanced Binding (EB) are hydrophilic and ideal for antibody sandwich assays.
MultiSorp™ are highly hydrophilic and are suitable for glycans and water-soluble proteins.

Transparent modules in standard 96-well frames.

• Standard format 128 x 86 mm
• High optical quality for reliable results
• Free-standing modules with easy handling
• Alphanumeric system for better orientation

Choice of different surfaces:
PolySorp™ serve to absorb hydrophobic molecules.
Medisorp™ slightly hydrophilic and bind a variety of biomolecules.
MaxiSorp™ hydrophilic and ideal for antibody sandwich assays.

Accessories Frames for Breakable LockWell Modules, PS

Purity, stability, color and other features to facilitate laboratory work.

• Extremely thin-walled polypropylene wells guarantee an optimal temperature transfer
• Exceptionally stable and torsion-resistant polycarbonate frame
• Elevated well edges ensure effective sealing and reduce the risk of cross-contamination
• Batch-tested and certified free of DNA, DNase, RNase and PCR-inhibitors (PCR clean), additionally free of bacterial DNA
• Autoclavable up to 121 °C
• Available with bar code (on request)

Alternative Eppendorf twin.tec PCR plates 384 Alternative PCR plates, 96/384 well Eppendorf twin.tec® Alternative PCR plates, 96/384 well, Eppendorf twin.tec® Trace, BioBased, PCR clean

Cover mats reduce the maximum volume of wells. Adhesive sealing films can also be used.

The plates are suitable for sample collection, storage, combinatorial chemistry, substance libraries, bacteria and yeast cultures and as collection plates for Nunc filter plates. They are resistant to most chemicals, solvents and alcohols used in combinatorial chemistry.

• Colour natural
• With shared wall technology
• Round bottom reduces fluid retention

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• High clarity enables optimal microscopic examinations
• Lid enables optimal gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• Individually wrapped peel-off bags
• Consecutive lot numbering
• 384 and 1536 well foramt available

Magnetic levitation is a simple method to reproduce in vitro the conditions prevailing in native tissue. The Bio-Assamber™ Kit is ideal for cultivating floating 3D cell cultures for long-term experiments. The cultured 3D cell cultures can be studied wonderfully with common biological techniques, such as immunohistochemical analysis methods and Western blots.

Features & Benefits:

• Simple handling - No sample loss
• HTS with flat cell base for optical imaging
• Compatible with automation systems

This technology is suitable for high-throughput 96 and 384 well applications and is not limited to specific cell types. Magnetic 3D bioprinting can generate viable spheroids and continuously analyze the viability of the cells in the spheroids using commercially available assays.

Features & Benefits:

• Easy handling - No sample loss
• HTS with flat cell base for optical imaging
• Compatible with automation systems

384 Well Bioprinting Kit:

• 600 µl vessel NanoShuttle™-PL (2)
• 384 Well Spheroid Drive (1)
• 384 Well Holding Drive
• 384 well cell culture microplate (transparent) with cell repellent surface

384 Well Bioprinting Kit (with black µClear® microplates):

• 600 µl vessels NanoShuttle™-PL (3)
• 384 Well Spheroid Drive (1)
• 384 Well Holding Drive (1)
• 384 well cell culture microplate (black, with µClear® foil bottom) with cell repellent surface

Alternative 384/1536-Well Plate with Cover, PS Alternative 96 Well Polystyrene Microplates, PS

In order to enable a savings potential in the 384 well format, the 384 well Small Volume™
microplates were developed. They have round wells with a conical geometry. The wells have a total volume of 28 μl and a working volume of between 4 μl and 25 μl. All plates have printed LOT number and also free of detectable DNase, RNase and non-pyrogenic.

Properties:

• Perfect for top reading even at low working volumes
• Savings in reagent similar to 1536 well microplates
• Suited for transmission, fluorescence and luminescence applications
• Excellent optical properties
• Available in med. binding or high binding quality (MICROLON®, FLUOTRAC™, LUMITRAC™)
• Available cell culture treated
• Available in non-binding quality

The plates are suitable for agglutination tests, sample collection and storage.

• Transparent
• Round bottom for optimal sample recovery
• Alphanumeric grid allows quick and easy identification of samples
• For use with robots and liquid handling systems
• Can be closed with sealing mats and adhesive foil

Efficient performance of plasmid DNA, PCR and vacuum filtrations. Suitable for vacuum, filtration, centrifugation or overpressure processes. The plates are recommended for protein purification, lysate clarification and general filtration.
The PET frits have a pore size of 20 µm.

• Specially designed for high throughput sample processing
• With shared wall technology

Efficient performance of plasmid DNA, PCR and vacuum filtrations. Suitable for vacuum, filtration, centrifugation or overpressure processes. The plates are recommended for protein purification, lysate clarification and general filtration.
-Specially designed for high throughput sample processing

• With shared wall technology

Efficient performance of plasmid DNA, PCR and vacuum filtrations. Suitable for vacuum, filtration, centrifugation or overpressure processes. The plates are recommended for protein purification, lysate clarification and general filtration.
The glass fibre plate has a PET frit and two layers of glass fibre membrane for binding DNA. The PET frits have a pore size of 20 µm.

• Specially designed for high throughput sample processing
• With shared wall technology

3D bioprinting, viable spheroids can be generated and the viability of the cells in the spheroids can be continuously analyzed using commercially available assays.

Features & Benefits:

• Easy handling - No sample loss
• HTS with flat cell base for optical imaging
• Compatible with automation systems

96 well bioprinting kit (with black µClear® microplates):

• 600 µl vessels NanoShuttle™-PL (3)
• 96 Well Spheroid Drive (1)
• 96 Well Holding Drive (1)
• 96 well cell culture microplate (black, with µClear® foil bottom) with cell repellent surface

96 Well Bioprinting Kit:

• 600 µl vessels NanoShuttle™-PL (3)
• 96 Well Spheroid Drive
• 96 Well Holding Drive
• 96 well cell culture microplates (transparent) with cell repellent surface

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• Perfect for top reading even at low working volumes
• Suited for transmission, fluorescence and luminescence applications
• Excellent optical properties
• Optimal performance
• Highest possible degree of automation
• 96 and 384 well format availbale

The BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.

• cellGrade™ plus surfaces
• To be used as a hanging or standing insert
• Sterility Assurance Level (SAL) of 10^-6
• Suitable for 2D and 3D cell cultures
• BIO-CERT^® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic

The BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.

• cellGrade™ plus surfaces
• To be used as a hanging or standing insert
• Sterility Assurance Level (SAL) of 10^-6
• Suitable for 2D and 3D cell cultures
• BIO-CERT^® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic

The BRAND Insert 2in1 is a cell culture insert used for skin model production, 3D epithelium cultures, chemotaxis analyses, transmigration assays, transport and polarity studies.

• cellGrade™ plus surfaces
• To be used as a hanging or standing insert
• Sterility Assurance Level (SAL) of 10^-6
• Suitable for 2D and 3D cell cultures
• BIO-CERT^® CELL CULTURE QUALITY: Free of human DNA, RNase, DNase, Pyrogens and non cytotoxic

CELLview™ Glass bottom microplates are particularly suitable for demanding applications in high-resolution microscopy. The optimized microplate geometry with the lowered bottom ensures optimal microscopic analysis of the outer cells, even with immersion objects. The round and conical cell geometry reduces meniscus effects and guarantees an even distribution of the cells as well as constant results during microscopy.

Features & Benefits:

• Excellent image quality and resolution
• compatible with confocal microscopy systems like Opera Phenix, Perkin Elmer-Yokogawa, WAKO-Image Express, Molecular Devices-Cytation, Biotek

Crystal clear PS combined with a flat, distortion-free bottom offers excellent optical properties. A flattened, raised ring around each well reduces the risk of cross-contamination and allows the wells to be sealed with silicone grease and cover glasses (ø 18 mm) or VIEWseal™ adhesive films. A slightly raised cover plate protects cover glasses and adhesive film during transport and storage.

Features & Benefits:

• Flat cell bottom

DNA LoBind plates for maximum sample recovery from nucleic acids by reducing the binding of the sample to the surface. Suitable for preparation or storage of DNA and RNA samples, forensic trace analysis, preparation of dilution series in quantitative qPCR, sample preparation in next-generation sequencing and creation of genome or oligonucleotide libraries.

• PCR clean: free of human DNA, DNase, RNase and PCR inhibitors
• High-contrast, alphanumeric lettering
• Frame white or blue
• Rounded RecoverMax^®-Well-Design
• Elevated well frames for reliable sealing

Alternative Deep-Well Plates DNA LoBind, 96/384-well, PP, with barcode