Accesorios para bombas

For more demanding applications, such as battery filling systems, disinfectants, dosing pumps, pharmaceutical production and chemical processing in the semiconductor industry. The coupling parts are fitted with a valve. When disconnecting the coupling, both sides close tightly. Main components and stop valve made of PP. Unlocking button, springs and pins made of stainless steel 316. Material O-rings: EPDM.

• Unlocking button for one-handed operation
• Integrated connections for short installation lengths and fast installation
• With stop valve
• Sterilizable with gamma rays

Accessories Accesorios para acoplamientos de uso general de las series PMC, PMC12, PLC y PLC12

Aparatos ligeros y potentes para trasegar cantidades pequeñas de medios acuosos hasta 300 mPas de bidones, toneles y recipientes de cuello estrecho con control de revoluciones.

• Motor 230V/200 W (IP 24)
• Tubo de bomba sin junta
• Se requiere un medidor de flujo accesorio adecuado
• Bomba con conexión de tubos

Dos opciones:

• Modelo de polipropileno para ácidos y bases
• Modelo de acero inoxidablepara lubricantes poco viscosos

Disponible como set (9.880 310-9.880 315) con manguera de PVC de 1,5 m, boquilla de PP, soporte de pared.
Set de accesorios:Boquilla Lutz, manguera de PVC de 1,5 m 3/4 ", conexión de manguera, abrazaderas de manguera, soporte de pared (para bomba B2 Vario PP-SL Ø 32 mm).

Alternative Bombas para bidones, PP

Tubos y ensambles
La gama de tubos Hamilton Luer Lock permiten conectar/desconectar rápidamente componentes con terminales Luer macho que se utilizan en aplicaciones donde se utilizan microfluidos. Hamilton ofrece una gran variedad de tubos químicamente inertes adecuados para aplicaciones específicas de fluidos. Se pueden suministrar tubos de diferentes calibres, longitudes, ejes y otros accesorios que cumplan con las normas establecidas o las especificaciones del cliente. Para construir sus propios ensamblajes, Hamilton ofrece kits de ejes y tubos. Hamilton proporciona un sellado totalmente hermético (clasificado con 0,6 MPa de estanqueidad) gracias a que los ensables y los adaptadores se conectan con total firmeza al tubo.

Disponible bajo pedido conjuntos de tubo de diferentes longitudes con 2 ejes.
El tubo tiene una longitud de 500 mm, pero puede recortarse a la longitud deseada. Otras longitudes disponibles bajo pedido.

Accessories Bombas manuales OTAL®, PP Alternative Bombas para bidones Pump-it®

Componentes de manguera FEP

The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. A scale with container can also be placed on the storage area so the liquid that is being dispensed can be measured accurately. The holder can be used for pumps with discharge tube and discharge hose.

• For drums with 60 to 220 l
• Size storage area: 240 x 240 mm
• Load capacity: 10 kg

• With delivery tubes made of PP/PVC
• For safe filling of car batteries with acid or distilled water
• With tube shutoff valve
• With dosing tip for precise filling

Alternative Hand pumps OTAL®, stainless steel Alternative Hand pumps OTAL®, PP Alternative Hand pumps OTAL®, PP, with tube and stopcock Alternative Hand pumps OTAL®, PVDF Alternative Bombas manuales OTAL®, PP

Dosing and Feeding pumps for reproducible results. Flow characteristics in combination with various tubing diameters are pre-programmed for accurate flow rate numbers. With freely selectable process parameters.

• Speed, direction of rotation and on / off function is controllable with an analog interface or digital with built-in RS232 interface
• Pre-programmed flow characteristics are shown in the display
• Digital read-out of Speed, Tubing diameter, Flow rate, Dosing volume, Interval dosing, Pause function
• With buttons for selecting all process parameters
• Easy calibration of flow volume and flow rate
• Smooth start operation prevents from spills and splashing media
• A press of the max button accelerates the filling and draining of the tubing
• For safety in unattended continuous operation, the motor will be switched off in case of an overload situation to prevent overheating
• Optional foot switch to operate pump drive in closed fume hoods and to facilitate filling operations
• Pump heads with convex rollers for cell protection are available for use in cell biology

The pump head is not included. Please order separately.
Scope of supply: Pump drive, adapter for multi-channel pump heads

MINIPULS 3 tubes for R1, R2, R4 and R8 pump heads
MINIPULS evolution tubes for MF1, MF2 and HF2 pump heads

• Many different inner diameters
• Compatible connectors

The MINIPULS 3 is a rugged peristaltic pump with interchangeable heads for delivering smooth, low pulse flows of biological and chemical fluids in 1, 2, 4, or 8 channel standard flow rate and 2 or 4 channel high flow rate configurations.

Gilson’s MINIPULS Evolution is the brand-new peristaltic pump specifically designed to meet today's customers' laboratory liquid handling needs with its modern design combining great performance, ease-of-use, flexibility and safety.

Completos, para KISS E, CC-E y con los baños indicados. Incl. conectores para manguera NW 12.

Para uso con todas las bombas peristálticas rotarus^®.