Turbiditet

Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.

Graduations, ml:	Subdivisions, ml
0 to 2	0.1
2 to 10	0.5
10 to 100	1.5
100 to 300	10
300 to 1000	50

Accessories Sedimentation cones, accessory stand, Acrylic/PP Accessories Accessory holders for sedimentation cones, PVC Alternative Sedimentation cones, borosilicate glass 3.3

Acrylic/PP. To hold two Imhoff sedimentation cones. Compact and easy to transport even when fully loaded.

Accessories Sedimentation cones, borosilicate glass 3.3 Accessories Sedimentation cone, plastic, SAN Alternative Sedimentation cones, accessory holder Alternative Accessory holders for sedimentation cones, PVC

Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.

Graduations, ml:	Subdivisions ml:
0 to 2	0.1
2 to 10	0.5
10 to 40	1.0
40 to 100	2.0
100 to 1000	50.0

Accessories Stands for Imhoff cones, PMMA

Imhoff pattern. DIN 12672. Graduations and inscriptions in contrasting white enamel. Ring mark at 1000ml.

Graduations, ml:	Subivisions ml / Tolerance ±ml:
0 to 2	0.1 / 0.1
2 to 10	0.5 / 0.5
10 to 40	1 / 1
40 to 100	2 / 2
100 to 1000	50 / 10

Alternative Sedimentation cone, plastic, SAN

The microprocessor-based waterproof Infra-Red Turbidity meter TN-100 is easy-to-use and meets all rigor of rugged field applications. Using an Infrared light source, it delivers laboratory accuracy with a resolution of 0.01 NTU across an extended range of up to 20 NTU (Nephelometric Turbidity Units).

• IP67 Waterproof and Dustproof, easy cleaning and maintenance
• Automatic Push-Button Calibration (4 points) for unprecedented full-range accuracy
• Power-saving feature allows over 1200 measurements
• Large Easy-to-Read Display for optimum viewing of measurements with user-friendly message codes for easy troubleshooting
• Meets Performance Criteria as specified by ISO 7027 (DIN EN 27027) method

Scope of supply: Turbidity meter with 4 calibration standards, 3 empty cuvettes, sturdy carrying case, batteries and instruction manual

Specifications
Turbidity range:	0 to 2000 NTU
Resolution:	0.01 NTU (0 to 19.9 NTU) 0.1 NTU (20.0 to 99.9 NTU) 1 NTU (100 to 2000 NTU)
Accuracy:	± 2 % of reading ± 1 LSD ( 0 to 500 NTU) ± 3 % of reading ± 1 LSD (501 to 2000 NTU)
Repeatability:	± 1 % of reading or ± 0.01 NTU
Calibration Points:	4 points (automatic)
Response Time:	< 6 seconds for full step change
Calibration Standards:	0.02 NTU; 20.0 NTU; 100 NTU; 800 NTU
Light Source:	Infrared-emitting diode (850 nm)
Light Source Life:	> 1,000,000 tests
Power supply:	4 x 1.4 V batteries, > 200 h

Accessories Calibration Kit for Turbidimeter Eutech™ TN-100 Accessories Sample cuvettes for Turbidity meter Eutech™ TN-100

For determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.
Lowering line, please order separately.

Imhoff pattern, solid grey PVC. Stable design.

Accessories Sedimentation cones, borosilicate glass 3.3 Accessories Sedimentation cone, plastic, SAN Alternative Sedimentation cones, accessory stand, Acrylic/PP Alternative Sedimentation cones, accessory holder Alternative Accessory holders for sedimentation cones with stopcock, PVC

Imhoff pattern, solid grey PVC. Stable design.

Accessories Sedimentation cones, borosilicate glass 3.3 Accessories Sedimentation cone, plastic, SAN Alternative Sedimentation cones, accessory stand, Acrylic/PP Alternative Sedimentation cones, accessory holder

Accessories for measuring instruments MultiLine^® IDS from WTW^® for measuring turbidity parameters. Please order measuring instruments separately.

Accessories Cables AS/IDS for electrodes with plug head

For simultaneous injection of coagulant or reagents in six sample beakers.

For flocculation tests of water and waste water.

• choice of 2- or 6-bank models
• digital speed display
• two adjustable speed presets
• accurate and reproducible speeds
• diffused base illumination with black background
• accepts beakers up to 1000ml.

Adjustable speed range 25 to 250rpm. Dimensions (H x W x D): 460 x 320 x 220mm (two-bank model) 460 x 750 x 220mm (six-bank model). For 230 V 50 Hz, single phase supplies. Supplied with rotor blades but without beakers.
With BioCote silver based antimicrobial protection.

Accessories Coagulant injector for flocculation testers FJT-200D-6

Turbidity is measured according to ISO 7027 by nephelometric means (90° scattered light). The infra-red light-source permits measurement of coloured and colour-free samples. The automatic measurement range detection facility (Autorange) enables direct turbidity measurement from 0.01 to 1100 NTU.

• Automatic overall range adjustment with standard set T-Cal
• High accuracy
• Suitable for laboratory and mobile use
• Memory storage of up to 1000 data-sets
• Real-time clock
• Waterproof sample chamber and housing

Scope of supply: Turbidimeter TB 300 IR in carrying case, 1 set of turbidity standards T-Cal, 7 rechargeble batteries (AA), 1 lithium battery, main charger 100-240V, PC connection cable, 4 vials (diam. 24 mm) with lids, instruction manual

Specifications
Light source:	IR-LED (860nm)
Keypad:	acid and solvent resistant, membrane switch keypad
Auto - Off:	automatic switch off approx. 20 min after last key press
Display:	Graphic-display
Update:	Software update via internet
Memory:	1000 data sets with date, time and registration no.
Measuring range:	0.01 to 1100NTU (Auto range)
Resolution:	0.01NTU (0.01 to 9.99NTU) 0.1NTU (10 to 99.9NTU) 1NTU (100 to 1000NTU)
Accuracy:	± 2% of measured value or 0.01 (0 to 500NTU)/± 5% of measured value (500 to 1100NTU)
Ambient conditions:	0 to 40°C at 30 to 90% R.H. (non condensing)
Interface:	RS232
Power supply:	7 NiMH rechargeable batteries (AA/Mignon), wall plug mains adapter and Lithium battery for data storage and real time clock

Acrylic/PP.
For two sedimentation cones made of glass or plastic, with and without stopcock. Compact and easy to transport even when full.

Accessories Sedimentation cones, borosilicate glass 3.3 Alternative Sedimentation cones, accessory stand, Acrylic/PP Alternative Accessory holders for sedimentation cones, PVC

The turbidity meters Turb^® 430 IR acc. to DIN ISO 27027 and Turb^® 430 T acc. to US EPA 180.1 meet the requirements of the nephelometric measurement at 90° stray light for drinking water with highest precision, especially in the range < 1 NTU. The measuring range comprises 0-1100 NTU/FNU with automatic measuring range switching and is therefore suitable for water analysis as well as quality control, such as gasoline, cell cultures, as well as in the food and beverage industries.
The measurement and automatic 3-point calibration runs self-explanatory and menu-controlled. The calibration takes place via an AMCO Clear^® standard set (0.02-10-1000 NTU). Up to 1000 data sets including sample ID numbers can be stored and later put out GLP-compliant via the PC software LSdata. The quality assurance of the measured results is supported by calibration interval setting with documentation.

Scope of delivery:
Turb^® 430 IR / Turb^® 430 T: Turbidity meter with calibration set 0.02-10.0-100 NTU
Turb^® 430 IR/SET / Turb^® 430 T/SET: Turbidity meter in case with table insert, calibration set 0.02-10.0-100 NTU, PC software LSdata, accessories

Specifications
Measuring range:	NTU 0 to 1100 FNU 0 to 1100
Resolution:	0.01 in the range 0.00 to 9.99 0.1 in the range 10 to 99.90 1 in the range 100 to 1100
Accuracy:	± 0.01 NTU or ± 2 % of measured value
Reproducibility:	0.01 NTU or < 0.5% vof measured value
Cell size:	28 x 60 mm, 20 ml sample volume
Power supply:	4 x AA batteries for approx. 3000 measurements

Accessories Accessories for turbidity meters Turb® 430

Highly accurate turbidity standards composed of suspended microspheres, suitable for Instrument calibration and control of all turbidity meters. Stable, shelf life of 2 years (from Date of Manufacturing). NIST traceable, US EPA approved and tested in compliance with ISO 7027. HDPE bottles of 100 ml.

Two ranges available:

• Ratio range for Ratio Turbidity Measuring instruments (measure of the scattered light from the sample at a 90° angle from the incident light, plus at additional angles (several detectors)
• Non Ratio for Non Ratio Turbidity Measuring instruments will measure the scattered light from the sample at a 90° angle from the incident light (one detector)

Calibration kit includes 4 x 60 ml standard solutions (0.02, 20.0, 100, 800 NTU).

Each set contains one sealed cuvette with the indicated concentrations.

Scale: up to 100ml, ring mark: at 1000ml, subdivision: 0.1 ml (0-2ml), 0.5 ml (2-10ml), 1ml (10-40ml), 2ml (20-100ml), 50ml (100-1000ml).

Accessories Sedimentation cones, accessory stand, Acrylic/PP

Imhoff pattern, wood.

Alternative Sedimentation cones, accessory stand, Acrylic/PP Alternative Sedimentation cones, accessory holder

Transparent, sturdy frame for three 1000 ml Imhoff sedimentation vessels.

The portable turbidity meters are characterised by the use of Multipath 90° BLAC^® technology. Samples with low and high turbidity can be analyzed entirely nephelometric (Detection angle 90°) with the highest accuracy over the complete measuring range up to 4000 NTU. By eliminating stray light, highly accurate results are achieved for low turbidities down to 0.01 NTU.

• High performance optics to ensure accuracy
• Elimination of stray light through light absorbing trap (BLAC^®)
• Intuitive colour touch screen with animated guided procedures and straightforward data management, multilingual
• Visual warning for out-of-tolerance readings
• Data logger for 250 measurements plus all calibrations, verifications and factory recovery procedures
• 3 different modes: single, signal averaging, fast settling
• USB-C interface
• Optional operation with rechargeable battery pack or mains adapter

Scope of supply: Instrument, carrying case with plastic insert, T-CAL^® calibration and verification standards, silicone oil, sample vials with black lids, cleaning cloth, brush for sample vials, screwdriver, AA batteries
With infra red LED light source (860 nm), acc. to ISO 7027. Incl. Turbidity standards with 5, 20, 800 and 4000 NTU.

Specifications
Measuring range:	0 ... 4000 NTU
Resolution:	0.01 NTU
Accuracy:	±1.8 % + <0.014 NTU
Reproducibility:	<1 %, ±0,01 NTU
Dimensions (W x D x H):	155 x 225 x 83 mm
Weight:	898 g
Power supply:	4 x AA batteries
IP code:	IP 67

Accessories Accessories for Turbidity meters series TB350 Alternative Turbidity meter TB350 WL

The portable turbidity meters are characterised by the use of Multipath 90° BLAC^® technology. Samples with low and high turbidity can be analyzed entirely nephelometric (Detection angle 90°) with the highest accuracy over the complete measuring range up to 4000 NTU. By eliminating stray light, highly accurate results are achieved for low turbidities down to 0.01 NTU.

• High performance optics to ensure accuracy
• Elimination of stray light through light absorbing trap (BLAC^®)
• Intuitive colour touch screen with animated guided procedures and straightforward data management, multilingual
• Visual warning for out-of-tolerance readings
• Data logger for 250 measurements plus all calibrations, verifications and factory recovery procedures
• 3 different modes: single, signal averaging, fast settling
• USB-C interface
• Optional operation with rechargeable battery pack or mains adapter

Scope of supply: Instrument, carrying case with plastic insert, T-CAL^® calibration and verification standards, silicone oil, sample vials with black lids, cleaning cloth, brush for sample vials, screwdriver, AA batteries
With white light LED light source, acc. to EPA (pending). Incl. Turbidity standards with 5, 20, 800, 2000 and 4000 NTU.

Specifications
Measuring range:	0 ... 4000 NTU
Resolution:	0.01 NTU
Accuracy:	±1.8 % + <0.014 NTU
Reproducibility:	<1 %, ±0,01 NTU
Dimensions (W x D x H):	155 x 225 x 83 mm
Power supply:	4 x AA batteries
IP code:	IP 67

Alternative Turbidity meter TB350 IR

USB-C cable for easy data transmission to a PC.