Microplates

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• Reduction of sample volume by up to 50 %
• Standardised pathlength (1 cm=170 μl, 0.5 cm=80 μl)
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need.

Properties:

• Uniform external dimensions
• Well-to-well spacing 9 mm
• Alphanumeric well coding
• High chemical resistance
• High temperature resistance (-196 °C to +121 °C)
• Sealable with adhesive films and heat sealer
• Sealable with CapMats
• F-Bottom / Chimney Well: chimney-like arrangement wells, each well stands on its own
• V-Bottom: entire sample volume must be pipetted off

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• High clarity enables optimal microscopic examinations
• Lid enables optimal gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• Individually wrapped peel-off bags
• Consecutive lot numbering
• 384 and 1536 well foramt available

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• F-Bottom / Chimney Well: chimney-like arrangement wells, each well stands on its own
• FLUOTRAC™ are black microplates for fluorescence measurements
• LUMITRAC™ are white microplates for luminescence measurements
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

Sviluppati per saggi immunologici quantitativi e qualitativi in fase solida, ad es. tecniche ELISA.

• Sistemi di orientamento alfanumerico
• Formato standard 128 x 86 mm
• Alta qualità ottica
• Quattro scelte per il fondo: fondo piatto (F), fondo tondo (U),fondo piatto con curvatura (C) o StarWell™
• Cornici e moduli disponibili separatamente
• I moduli rimangono nel telaio quando invertiti
• Riproducibilità certificata del legame
• Modulo indipendente

Scelta di diverse superfici:
PolySorp™, Immulon™ 1B e Universal Binding (UB) servono ad assorbire molecole idrofobiche.
Medisorp™ e Immulon 2HB sono leggermente idrofili e legano una varietà di biomolecole.
MaxiSorp™, Immulon 4 HBX e Enhanced Binding (EB) sono idrofili e ideali per saggi sandwich anticorpali.
MultiSorp™ è altamente idrofilo e adatto a glicani e proteine solubili in acqua.

Micropiastre per test immunologici con superfici per legami di affinità (streptavidina passiva e streptavidina immobilizzante, chelato di nichel e glutatione, BioBind).

• Interazione streptavidina-biotina per un"ampio range di biomolecole
• Superficie legante altamente specifica
• Miglioramento del rapporto segnale-rumore
• Piastra da 96 pozzetti: volume di lavoro 100 µl/pozzetto, volume totale 350-400 µl/pozzetto
• Piastra da 384 pozzetti: volume di lavoro 50 µl/pozzetto, volume totale 120 µl/pozzetto

Ideali per sigillare piastre per PCR.

• PCR pulita: Certificati esenti di DNA umano, DNase, RNase e inibitori di PCR
• PCR Film: Consente il controllo visivo dei campione
• PCR Foglio: Facile da forare, non si attacca al puntale della pipetta (ideale per sistemi automatici).
• Termosaldatura: posizionare il film o la pellicola con i bordi adesivi sulla piastra. Sigillare la piastra utilizzando il termosigillatore.

Accessori

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• High clarity enables optimal microscopic examinations
• Lid enables optimal gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• Individually wrapped peel-off bags
• Consecutive lot numbering
• 384 and 1536 well foramt available

We set high standards on the quality of our immunological products, especially on consistency and reproducibility of binding properties. The incoming raw material used for ELISA microplates is routinely monitored for identity and immunological quality. All ELISA are ideally suited for optical measurements. Two surface qualities offers for ELISA
microplates: the hydrophilic high binding products and the less hydrophilic medium binding products.

Proporties:

• Manufactured from crystal clear polystyrene
• Compatible with automated systems
• High-throughput manner
• Cost-effective
• Results rapid available

White and black versions are available on request.

Alternativa piastre 384/1536-pozzetti con coperchio, PS Alternativa Micropiastre in PS

• V-shape provides optimal recovery of reagents
• Shared wall technology increases well volume and wider cells improve mixing
• Ideal as collection plate for Nunc Filter Plates
• Low binding for homogeneous assays and storage

Accessori Coperchi per Piastre da 96 e 384 pozzetti Accessori Nastro sigillante per Piastre MultiWell Alternativa Piastre V96 MicroWell™, PS

Non-binding surfaces from Greiner Bio-One are achieved through a stable chemical modification to covalently link functional groups with the base polystyrene polymer. Under aqueous assay conditions a hydrate layer forms, preventing dissolved biomolecules from binding to the microplate surface. As the non-binding surface is stable under common assay conditions, there is no potential for degradation or leaching and resultant assay interference.

Properties:

• Äußerst geringe, nicht-spezifische Biomolekülbindung (Proteine, DNA, RNA)
• Langfristige Oberflächenbeständigkeit ohne Degeneration oder Auswaschen
• Hohe Testsensitivität mit reduziertem Hintergrund

Non-binding surfaces from Greiner Bio-One are achieved through a stable chemical modification to covalently link functional groups with the base polystyrene polymer. Under aqueous assay conditions a hydrate layer forms, preventing dissolved biomolecules from binding to the microplate surface. As the non-binding surface is stable under common assay conditions, there is no potential for degradation or leaching and resultant assay interference.

Properties:

• Äußerst geringe, nicht-spezifische Biomolekülbindung (Proteine, DNA, RNA)
• Langfristige Oberflächenbeständigkeit ohne Degeneration oder Auswaschen
• Hohe Testsensitivität mit reduziertem Hintergrund

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polypropylene (PP) has low biomolecular binding characteristics, a high temperature tolerance, and is resistant to many standard laboratory chemicals, such as DMSO. From black polypropylene microplates for fluorescence polarisation to white microplates for scintillation proximity assays (SPA), the 96 well polypropylene range has all you need.

Properties:

• Uniform external dimensions
• Well-to-well spacing 9 mm
• Alphanumeric well coding
• High chemical resistance
• High temperature resistance (-196 °C to +121 °C)
• Sealable with adhesive films and heat sealer
• Sealable with CapMats

SCREENSTAR microplates are specialised products for sophisticated microscopic
applications, in high content screening (HCS) or high resolution microscopy with water and oil immersion objectives. They combine outstanding glass-like optical properties with an excellent surface for adherent cell culture. Display excellent optical properties with reduced autofluorescence in the lower UV range and low birefringence. Enable complete periphery access for high magnification objectives.

Proporties:

• 190 μm ultraclear cycloolefin film bottom
• refractive index of 1.53 comparable to glass
• Recessed microplate bottom allows low working distance and high aperture
• Round well geometry to reduce optical distortions
• Smooth microplate top absent improves heat sealing
• Are available in 96, 384 and 1536 well format

For the propagation of fastidious cells like primary or sensitive cells as well as cells cultivated under restricted growth conditions. Furthermore, the Advanced TC™ surface facilitates consistent and homogenous cell attachment increasing the overall cell yield and reducing cell loss, for example during automated washing steps. Moreover, cells cultivated on the Advanced TC™ surface exhibit higher transgene activity after gene transfer / insertion. Due to the production process, the modification of the polymer assures consistant and reproducible product quality. Transport and storage can be carried out at room temperature.

Proporties:

• For particularly demanding cells
• Consistent cell attachment
• Homogenous cell growth, for example during automated washing steps
• non-cytotoxic and free of detectable DNase, RNase and human DNA and endotoxins

Microplates in strip format offer the advantage of greater flexibility in diagnostics. Individual strips can be removed from the support frame so that the number of tests to be performed can be adjusted to the number of samples, and is not predetermined by the microplate format used. In addition, the individual strips of a microplate can be subjected to a wide variety of different test conditions.

Proporties:

• Strips mounted in frame
• U-Bottom: no corners, therefore simple and clean pipetting
• F-Bottom: ideal for the most precise optical measurements

The ALPS 50V provides a safe, controlled method of sealing sample plates made from various plastics. The sealer is adjustable for both sealing time and temperature and gives a visual countdown display during the sealing process. The ALPS 50V can seal deep well plates (Bioblocks) with various thermal sealing plastic or foil films and may be adapted to seal Microplates and PCR plates by using a suitable plate carrier.

Specification
Temperature Set Point Range:	125 to 200 °C in 1 °C increments
Time Set Range:	1 to 9 sec. in 0.5 sec. increments
Operating Humidity Range:	20 to 80 % non-condensing
Operating Temperature:	18 to 30 °C
Size (W x D x H):	220 x 321 x 425 mm
Weight:	7.2 kg
Power Supply:	IEC 320, 100-130 VAC, 50/60 Hz or 220-240 VAC, 50/60 Hz, max. 350 W
Standards:	FCC Class A, CFR 47 Part 15 BS EN 61326:1998

Alternativa AccuSeal Sigillatrice per piastre Semi-Automatica

Microtiter plates for immunoassays with surfaces for covalent binding. With the main orientation towards peptides. Working volume 100 µl/well, total volume 350-400 µl/well.

• Minimal washout
• Resistant to heavy rinsing
• Controlled alignment

Protein LoBind plates are specially designed for proteomics and other areas of protein research. Suitable for preparation or storage of protein, peptide or antibody samples, enzymatic assays, storage of virus stock solutions or cell suspensions and sample processing in toxicology.

• V-bottom wells
• High-contrast, alphanumeric lettering
• Wells transparent with white frame
• Rounded RecoverMax^®-Well-Design
• Elevated well frames for reliable sealing
• PCR clean: free of human DNA, DNase, RNase and PCR inhibitors

Alternativa

Suitable for sample storage and preparation, protein analysis and genotyping.

• High-contrast, alphanumeric lettering
• Wells transparent with white frame
• Rounded RecoverMax^®-Well-Design
• Elevated well frames for reliable sealing, even with heat sealing
• Temperaturresistance from -86 °C to 100 °C
• Autoclavable (121 °C, 20 min)
• Centrifugation resistance up to 6000 × g
• PCR clean: free of human DNA, DNase, RNase and PCR inhibitors or sterile

Alternativa

For measuring absorbance assays in the visible and UV range, fluorescence and chemiluminescence assays, DNA- and protein concentration with absorbance or fluorescent dyes, cell based assays, cell viability and apoptosis assays. UV-VIS Microplates feature an ultrathin film bottom for good light transmission in the UV range. Black Eppendorf Microplates offer an good signal-to-noise ratio. White Eppendorf Microplates are optimized for highest sensitivity in the detection of luminescence signals by maximizing reflection.

Alternativa

Piastre chiare, bianche o nere con eccellente chiarezza ottica e pozzetti a fondo piatto. Modificazioni della superficie Nunclon™Δ, Collagene I, Poly-D-Lisina adatte per test di culture cellulari.
Materiale piastre: Polistirene
Volume totale µl/pozzetto: 400