Vortexer

The attachments enable vigorous mixing of samples. Vessels are fixed vertically.

Robust and reliable shakers for speedy mixing and shaking of samples. Multiple accessories: e.g. adapter tops for test tubes, beakers, centrifuge tubes etc. Adapter tops can be changed easily with the snap fit system.

Vortex-Genie^® 2: Variable speed for precise mixing from gentle to vigorous. Broad range of attachments for most tubes, plates and other containers. Hands-Free or Touch On control.
Vortex-Genie^® 2T with an integrated timer: Timer function: (Touch On) 1-60 seconds, (Hands-Free) 1-60 minutes or continuous. Unit automatically stops at the end of user programmed time.
Digital Vortex-Genie^® 2 with digital control and display of speed and time: Digital display provides accuracy, reproducibility and repeatability. Timer function: (Touch On) 1-99 seconds, (Hands-Free) 1-99 minutes or continuous. Specially configured unit for Applied Biosystems protocol available.
Vortex Genie^® Pulse: Fully programmable vortex mixer with ON/OFF feature. Pulse 0.1 sec to 99 min.

Scope of supply: Vortexer, platform (diam. 76 mm) with rubber cover, Pop-off cup

Test tube shaker with infinitely adjustable speed range. Specially for mixing small sample volumes with touch function.

Inexpensive, compact test tube vortex shaker. Designed for mixing small test samples by touch function.

• Small, compact and reliable
• For small containers up to 30mm in diameter, e.g. test tubes, centrifuge tubes, Eppendorf tubes
• Fixed speed (2800rpm)
• Excellent mixing
• Top of housing and the test tube accessories are made from chemically inert plastic. The bottom section is a coated, zinc die-casting.
• Includes lightweight 12V mains adapter

Vortex shaker suitable for intermittent operation (touch function), activated by pressing shaker attachment, or for continuous operation.

• Wide speed range, infinitely adjustable
• Versatile, due to 3 accessory interchangeable attachments and 7 inserts (e.g. Eppendorf tubes, microtitre plates, 250ml Erlenmeyer flasks etc.), please order separately
• Attachments securely click onto shaker in any position
• Strap clamp (VG3.36) ensures easy holding of round/Erlenmeyer flasks
• Sturdy, die cast zinc casing
• Stable at high speeds due to special feet (silicone base with ultra-high vibration damping)
• Eccentric drive with ball bearings
• Self-ventilated motor allows continuous operation with minimal warm-up of the housing

Ideal for mixing samples in Eppendorf tubes, vials and similar vessels of different diameters at extremely high speed rates. The strong 5 mm vibration orbit yields the best results even with high viscosity media or solids out of solution and quickly gives a smooth and even dispersion. Short time and continuous mode.

Standard model Reax top:

• Features an analog dial speed control, no settings of specified rpm numbers

• Features analog dial speed control with accurate rpm numbers setting
• Electronic speed control provides constant rpm output even at very low speed and under changing loads
• Precise speed control with settings of specified rpm numbers

With low profile and small footprint for gentle mixing to vigorous re-suspension of cell or chemical pellets.

• variable speed: 750rpm to 3000rpm
• continuous or touch operation
• for tubes up to 28.5 mm (50 ml) diameter

Compact, universal small shaker suitable for shaking tasks with all small vessels and microtitre plates.

• Continuous or touch operation (with standard attachment)
• Two operating modes available:

• Stable in all speed ranges
• Sturdy, zinc, die-cast casing

Four Mini Vortex Mixer models for gentle to high-speed mixing are available. Analog model offers variable speed control, and digital model allows input of the exact speed and time to achieve reproducible results. Pulsing model features a unique pulse action that reduces heat generation, while providing more effective mixing and cell disruption. Fixed speed model offers one-touch, high-speed mixing.

VXMNFS: Fixed high speed mixing, TOUCH mode operation
VXMNAL: Auto/Off/On Rocker switch, Speed Knob: Variable 1 to 10 Dial Marks, continuous or TOUCH mode operation
VXMNDG: Auto/Standby/On Rocker Switch, LED Displays for Speed/Time, Up/Down Buttons for Set-Point Control, continuous or TOUCH mode operation
VXMNPS: Auto/Standby/On Rocker Switch, LED Displays for Speed/Time, Up/Down Buttons for Set-Point Control Pulse Button

Scope of supply:
VXMNFS / AL / DG: Vortexer incl. Cup head and 76 mm head with cover
VXMNPS: Vortexer incl. Cup head and 76 mm head with cover and stainless steel tube holder

Versatile Test tube shaker with 3 mm vibration orbit, accomplishes excellent results especially in large vessels. The Multi Reax allows for rigid to smooth dispersion of viscous media and solids.

• Short term and continuous run
• Stepless speed adjustment
• Digital display
• Timer function allows for unattended operation and can be set from 1 to 999 minutes. With acoustic alarm when the operation stops.

• Attachment for 26 vessels with diameters from 10 mm to 16 mm
• Attachment for 12 vessels with diameters from 16 mm to 32 mm

Optoelectronically controlled small shaker with a very wide speed range.

• Suitable for continuous operation
• New design and improved drive system
• Circular shaking motions
• Slow speeds are well maintained
• Attachments are interchangeable

VX 11 Basic holder: Attachment for test tube inserts.
VX 11.1 Test tube insert: Attachment for Eppendorf tubes or test tube inserts.
VX 11.2 / VX 11.3 / VX 11.4 Test tube inserts: For test tubes.

• Low profile, ergonomic design
• Robust, die-cast housing avoids unnecessary movement during use
• Powerful vortex mixing action, ideal for a range of tubes
• Two models available
• Economic fixed speed model V-100
• Variable speed model V-200 with choice between intermittent or continuous operation
• Integral retort rod fixing
• Range of accessory heads available

Multi-Tube Vortexers are ideal for high throughput sample processing. Holds up to 50 samples simultaneuosly. Interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter available. Vortexing action is created by securing the top of the sample in place while allowing the bottom to rotate freely in a 3.6 mm orbit. Suction cup feet reduce motion and prevent sliding on work surface. Analog and digital models, both microprocessor-controlled and run in continuous or timed mode.

• Digital model is ideal for applications that require accuracy and repeatability
• Pulsing mode on digital model to enhance vortexing action
• Analogue model offers an economical alternative when exact speed/time is not required

Robust and reliable shaking device for mixing and shaking of samples in Erlenmeyer flasks, vials, tubes, beakers or microplates.

• Digital display for speed and time
• Speed increase in steps of 10 rpm
• Robust metal case
• Secure stand at high speed thanks to supports with high vibration damping
• Can be loaded with e. g. max. 6 Erlenmeyer flasks 250 ml or 2 multi racks each for 12 test tubes (max. tube diameter 29 mm, length min. 85 mm)

• Unique ratcheting clamping system, ideal for repetitive protocols and use with open containers
• Fully programmable
• Revers and interval mixing
• Pulse function

Vortex shaker especially for short time operation (Touch function) or continuous operation.

Vortexers with patented IR sensor for sample recognition: the shaking process starts automatically when the sample tube approaches the mixing cup head. This enables fatigue-free working, as the sample doesn"t have to be pressed on the device.

• For IR sensor and continuous operation
• Electronic speed control
• Adjustable shaking speeds up to 3000 min^-1
• Very good chemical resistance
• Broad range of accessories available

VX 1 one-hand attachment: For shaking single vessels 1 ml to 250 ml
VX 2 test tube attachment: For up to 36 test tubes or centrifugal tubes with a diam.of 16 mm
VX 2E.n "Eppendorf" attachment: For shaking of max. 64 "Eppendorf" tubes (1.5ml)
VX 7 Dish attachment: For mixing of culture bottles, Petri dishes, etc.
VX 8 Universal attachment: For rapid and secure clamping, e.g. 2 Erlenmeyer flasks up to 500 ml

Economical vortex mixer for mixing all kinds of samples. The continuously variable speed makes the Vortex Mixer useful for a variety of applications.

• "Touch" or continuous mode
• Pressure on vibrating plate starts device and enables effective working with one hand
• Continuously variable mixing speed

Easy-to-use vortex mixers with electronic speed control.

• Up to 3000 min^-1
• Very good chemical resistance
• Stable, solid housing

Rapid and powerful vortex shaking for a variety of tube sizes. Easy one hand operation with touch function.

• Made from durable ABS and silicone materials to resist most commonly used chemicals
• Low profile design and small footprint saves space on a bench top and in fume hoods
• Low activation force helps prevent user fatigue
• Quiet operation (53 dB) and low vibration

Powerful thermoshaker available for samples with small volumes, e.g. blood samples, pharmaceutical agents, DNA/RNA samples, DNA/RNA samples or Elisa assays. Without cross-contamination and with an optimal mixing result.

• Large and clear display with a simple menu structure allows for intuitive operation
• Two different speed modes for optimal mixing
• Speed adjustment according to insert, attachment and filling volume
• Robust aluminum die cast housing

Universal holder is required for use of the foam inserts. Please order separately.

The Insert Retainer is required for use of the Foam inserts. Please order separately.

Heavy-Duty Vortex Mixers feature a heavy-duty design and efficient motor to permit continuous duty operation, and the ability to handle accessory components over the entire speed range. They offer exact speed control when applications demand repeatable results. With microprocessor control. The Microplate Vortex Mixers are suitable for 2 standard microplates.

Models VXHDDG and VXMPDG:
Touch/Standby/On Rocker Switch, LED Displays for Speed/Time, Up/Down Buttons for Set-Point Control

Scope of supply:
VXHD series: Vortex Mixer incl. Cup head, Universal holder with cover and Foam insert for 38 x 1.5 to 2.0 ml micro tubes
VXMP series: Vortex Mixer incl. Cup head and 1 single Microplate holder

Compact, universal small shaker suitable for shaking tasks with all small vessels and microtiter plates Wide range of attachments

• Attachment detection
• Timer with countdown function
• Stable in all speed ranges
• Sturdy zinc die cast casing
• USB connection for remote control
• Continuous or touch operation (with standard attachment)