Slides

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Cut microscope slides are particularly economical and therefore represent an excellent alternative to the ground versions, for routine tasks. The corners and edges are 90° for all cut microscope slides.

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

The ground version of the slides is used to avoid cutting injuries or glass breakages during automated processing. Microscope slides have corners with either 45° or 90°. The edges are 90° for all ground microscope slides.

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Adhesion slides ensure quicker flatness and better adhesion of the samples. The microscope slides with a white frosted area and ground edges are supplied in shrink-wrapped plastic boxes of 72 pieces. The angle of the edges and corners for both items is 90°.

Può dispensare 72 vetrini singolarmente. Ruotando la manopola, si dispensa un vetrino. Si possono inserire solo vetrini secchi nel magazzino di conservazione. Con una sezione superiore trasparente e removibile per una facile visione dei vetrini rimanenti e per una conservazione pulita. Per vetrini per microscopia con dimensioni 75 x 25 mm e 76 x 26 mm.

Dimensioni: 75 x 25 x 1.0mm. Molati a 90°, area bianca SuperFrost scrivibile. Un nuovo metodo applicativo fornisce la superficie di un piano con una carica positiva permanente. Cariche elettrostatiche fissano sezioni congelate fresche di tessuti e preparazioni citologiche. Disponibile anche con area SuperFrost scrivibile blu, gialla, rosa o verde.

Conformi ISO 8037/1. Dimensioni 26x76 mm. Spessore nominale: 1 mm. Prelavati e lucidati. Misura: 26x76mm.
Disponibili anche con banda sabbiata, scrivibile, da 20 mm ad una estremità.

Conformi ISO 8037/1. Con banda colorata scrivibile come elencato sotto. Dimensioni 76x26 mm. Spessore nominale 1,0 mm. Con angoli tagliati o molati. Una vasta gamma di colori consente una facile e chiara identificazione e classificazione di diverse preparazioni da esaminare.

25x75 mm. Spessore 1,0 mm. Spigoli molati a 90°.