Dishes

LABSOLUTE® crystallizing dishes with or without spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. Therefore the dishes can be easily autoclaved. They have a functional labelling field and are resistant to cold alkaline solutions/lyes and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN 12338.

LABSOLUTE® evaporating dishes with a flat bottom and a functional spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The autoclavable evaporating dishes comply with DIN 12336 and are resistant to cold alkaline solutions/lyes and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

LABSOLUTE® crystallizing dishes with or without spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. Therefore the dishes can be easily autoclaved. They have a functional labelling field and are resistant to cold alkaline solutions/lyes and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN 12337.

LABSOLUTE® evaporating dishes are ideal for drying, concentrating and ashing sample material and comply with DIN 12903. They are glazed on the inside, temperature-resistant up to 1000 °C and have a useful spout. All LABSOLUTE® evaporating dishes are characterized by their high resistance to alkaline solutions and acids with the exception of hydrofluoric acid.

LABSOLUTE® evaporating dishes are ideal for drying, concentrating and ashing sample material and comply with DIN 12903. They are glazed on the inside, temperature-resistant up to 1000 °C and have a useful spout. All LABSOLUTE® evaporating dishes are characterized by their high resistance to alkaline solutions and acids with the exception of hydrofluoric acid.

Smaltate.

Smaltate.

Smaltate.

Cristallizzatori con o senza becco. DIN 12337 / 12338. Autoclavabili.

Smaltate.

In alternativa ai dischi in vetro borosilicato per apllicazioni similari. Prodotti da acciaio inossidabile robusto e senza saldature.

Prodotte in acciaio inossidabile, a fondo tondo. Un prodotto perfetto per riscaldamento ed evaporazione di liquidi. Può essere usato con fiamma diretta per prevenire rotture.

• DIN 12338
• Forma cilindrica, con becco
• A partire dalla capacità 100 ml con etichetta serigrafata
• Vetro tipo 1 / vetro neutro, in conformità con USP, EP e JP
• Autoclavabile

Con base. Sterilizzabili a 121 °C. Autoclavabili.

• Conforme ai requisiti DIN 12341
• Bordo ribruciato
• Autoclavabili

Fondo tondo, con becco. DIN 12903. I volumi da 10 a 310 ml hanno l"interno e l"esterno smaltato. I volumi da 640 a 3400ml sono smaltati ad eccezione della base esterna.

Fondo piano. Interno ed esterno smaltati tranne il bordo.

• Conforme ai requisiti DIN12336
• Forma sferica, fondo piatto, con becco
• Autoclavabile

Colore bianco. Bacinella multiuso. Buona resistenza meccanica, infrangibile, stabile, impilabile ed igienica. Adatta per alimenti. Di facile pulizia. Resistente a molti acidi e soluzioni alcaline. Bordi arrotondati. Prodotta per pressofusione.

Lucidate. Forma tonda con bordo e fondo piatto.

Adatti per usi alimentari ed usi generali di laboratorio. Polistirene antiurto.

Rotonde, bianche, con bordo stabile e base ad anello circonferenziale sul fondo. Idonee al contatto con alimenti secondo la Direttiva EC No. 10/2011.

Base con scanalature per uso fotografico. Impilabile.

In resina melamminica. La parte inferiore può essere autoclavata (121°C).
Coperchi disponibili a richiesta.

Acciaio inox 18/10. Satinate. Coperchio con impugnatura.

Remanit^® 4301. Bordo cerchiato.

• Conforme ai requisiti DIN 12341
• Bordo molato
• Classe idrolitica 3

In resina melamminica, bianca. Autoclavabili a 121°C.

Forma rettangolare. A pareti svasate. Smaltate, ad eccezione della base esterna.

• Conforme ai requisiti DIN 12336
• Fondo piano, con becco

Multiuso. Duraturo e resistente alla flessione, con forti bordi arrotondati. Impilabile per risparmiare spazio, superficie lucidata per facile pulizia. Resistente a molte soluzioni acide ed alcaline, adatto per alimenti.

Fondo sferico. Con becco. Interno ed esterno smaltati tranne il bordo.
Conformi DIN 12907.

Contenitore cilindrico. Tappo smerigliato.

Con scomparti. Per uso su banco o inseribile in cassetto.

Con angoli arrotondati.

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. All panels can be stacked together, both with and without cover. The special design of the panels is also in stacked plates a faster heat exchange over the entire bottom surface of each plate allows . All plates have an imprinted lot number and are both pyrogens and DNase / RNase - free .

Properties:

• High clarity and low autofluorescence
• Lid enables optimal gas exchange with the lowest possible evaporation
• Single position lids to prevent cross-contamination
• Alphanumeric well coding
• Compatible with common instruments and automated systems
• Easy-to-open packaging

Ideali per coprire beakers in PTFE. Eccellente resistenza chimica.

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. All panels can be stacked together, both with and without cover. The special design of the panels is also in stacked plates a faster heat exchange over the entire bottom surface of each plate allows . All plates have an imprinted lot number and are both pyrogens and DNase / RNase - free .

Properties:

• High clarity and low autofluorescence
• Lid enables optimal gas exchange with the lowest possible evaporation
• Single position lids to prevent cross-contamination
• Alphanumeric well coding
• Compatible with common instruments and automated systems
• Easy-to-open packaging

• Conformi DIN 12337
• Prodotti da vetro borosilicato Pyrex^®
• Adatti per utilizzo fino a 400°C
• Chimicamente e termicamente resistenti

The highest possible degree of automation, optimal performance and cost savings continue to be the requirements placed on microplates for high-throughput screening. The footprint is compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Well volume is 12.6 μl
• Working volume of 3 - 10 μl
• Curvature of the plates to < 100 μm
• Ideally suited for bottom reading even at low working volumes
• Suited for transmission, fluorescence and luminescence applications
• Excellent optical properties

384 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures. The improved Rounded Square Well Design allows flexible working volume of 15 - 110 μl, with the advantages of a round well, such as reduced wicking and bubbling.

Properties:

• Total volume: 131 μl
• Working volume: 15 - 110 μl
• Growth area: 10 mm2
• Lid enables gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding

We set high standards on the quality of our immunological products, especially on consistency and reproducibility of binding properties. The incoming raw material used for ELISA microplates is routinely monitored for identity and immunological quality. All ELISA are ideally suited for optical measurements. Two surface qualities offers for ELISA
microplates: the hydrophilic high binding products and the less hydrophilic medium binding products.

Proporties:

• Manufactured from crystal clear polystyrene
• Compatible with automated systems
• High-throughput manner
• Cost-effective
• Results rapid available

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• Reduction of sample volume by up to 50 %
• Standardised pathlength (1 cm=170 μl, 0.5 cm=80 μl)
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• μClear® with ultra-thin films, without the use of adhesives or solvents
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

Resistenti a temperature da -30 a 60 °C.

Resistenti a temperature da -30 a 60 °C.

Resistenti a temperature da -30 a 60 °C.

Con pareti verticali e bordi lucidati.
Con e senza coperchio in acciaio inox. Le dimensioni indicate sono nominali.

Acciaio 18/10. Forma cilindrica.