Benchtop centrifuges

Compact and reasonably priced mini centrifuges with two rotor types. Speed can be adjusted to 4000 rpm or 6000 rpm. Powerful motor for fast starting. Quick stop when the lid is opened.

LLG-uniCFUGE 2 with Universal rotor for 6 x 1.5/2.0 ml and 6 x 0.5 ml tubes and 2 times 8 x 0.2 ml PCR-stripes.

LLG-uniCFUGE 2/5 wth rotor for 4 x 5 ml tubes.

Scope of supply: Centrifuge, mains cable

The Z 206 A accepts up to 12 x 15 ml conical and round bottom tubes. For tubes with smaller dimensions we offer several adapters. For larger volumes we offer an angle rotor for 6 x 50 ml conical and round bottom tubes.

• Microprocessor with LCD display
• Electrical lid lock
• Pre-selection of the rotor type
• Active imbalance-identification and cut off
• Manufactured according to international safety regulations, i.e. IEC 61010
• Noise level under 60 dBA at max. speed
• A large variety of rotors and accessoires
• Easy change of rotors
• Distinct control panel

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Max. speed: 3220 x g (max. 4000 rpm)
• Rotors, covers, caps and adapters are all autoclavable (at 121 °C, 20 min. )
• Suitable for model 5810 / 5810 R centrifuges only.

For use with standard-, Vacutainer^®-, Falcon^®-tubes and bottles.

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Incl. steel sleeves and adapters
• Max. speed: 5005 × g (5500 rpm)

• Incl. rotor lid
• Max. speed: 16435 × g (max. 14000 rpm)

The small Thermo Scientific™ Heraeus™ Megafuge™ 8 benchtop centrifuge offers high capacity for its small footprint and is very user-friendly. It is available air-cooled or with refrigeration and is suitable for a wide range of clinical and research applications.

• High capacity with small footprint: 8 x 50 ml conical tubes in swing-out rotor, 24 x 5/7ml blood collection tubes, 30 SpinColumns or up to 4 microtitre plates
• Safe Auto-Lock™ rotor change at the touch of a button in just 3 seconds
• Certified aerosol-tight ClickSeal™ lids - can be easily closed and opened with one hand even when wearing gloves
• Very quiet operation (< 58 dBA with TX-150 rotor)
• One-touch operation with programme memory and optional password protection
• Highly visible display with backlight
• Glove- and detergent-friendly control panel
• Multilingual user interface
• Meets the latest clinical standards and safety requirements such as UL and IVD
• Temperature range of the cooled centrifuge 8R: -10 to 40 °C

These centrifuges offer a flexible rotor program with a modular adapter system which can accommodate a high variety of tube lengths.

• Ergonomic access height gives comfortable rotor loading
• Low noise level
• Motorized lid lock
• Reliable cooling at maximum speed*
• Imbalance detector
• Automatic rotor recognition logs rotor performance parameters and prevents these being exceeded
• Optional user setting by speed, rcf or radius correction values
• Values can be changed during centrifugation
• Temperature setting from -9°C to 40°C*
• Standby cooling*
• Selectable programme memory for up to 34 individual user programmes
• Short-spin function, speed can be preselected
• Fast-cool function* for rapid cooling of the centrifuge chamber
• 10 gentle acceleration and braking profiles for sensitive sample material

These centrifuges offer a flexible rotor program with a modular adapter system which can accommodate a high variety of tube lengths.

• Ergonomic access height gives comfortable rotor loading
• Low noise level
• Motorized lid lock
• Reliable cooling at maximum speed*
• Imbalance detector
• Automatic rotor recognition logs rotor performance parameters and prevents these being exceeded
• Optional user setting by speed, rcf or radius correction values
• Values can be changed during centrifugation
• Temperature setting from -9°C to 40°C*
• Standby cooling*
• Selectable programme memory for up to 34 individual user programmes
• Short-spin function, speed can be preselected
• Fast-cool function* for rapid cooling of the centrifuge chamber
• 10 gentle acceleration and braking profiles for sensitive sample material

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Max. speed 4500 x g (max. 5000 rpm)
• Rotors, buckets, caps and adapters are all autoclavable (20 mins. at 121 °C)

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Max. speed: 15550 x g (max. 11000 rpm)
• If used in refrigerated centrifuge 5810 R: max. speed is 18500 x g (max. 12000 rpm )
• Incl. rotor lid
• Rotors, covers and adapters are all autoclavable (at 121 °C, 20 min. )

Microcentrifuge for standard molecular biology applications. The compact centrifuge with low access height is characterized by extremely quiet operation.

• 18 place rotor for 1.5 / 2.0 ml tubes and Microtainer^®
• Lid opens automatically after spinning
• Very small profile, minimal bench space required
• Remarkably silent, even without rotor lid
• Standard, certified aerosol-tight rotor
• Convenient Eppendorf two-dial operation
• Rpm / rcf converter
• Short-spin
• The patented compressor technology reduces vibration to a minimum
• Low access height of 26 cm
• Keeps a constant 4 °C at max. speed
• Fast Temp for rapid pre-cooling of the centrifuge

Non-refrigerated microcentrifuge for common standard applications with a high sample throughput, providing ergonomic comfort and great flexibility with its 6 rotor options.

• Fast acceleration and deceleration (10 acceleration and braking ramps)
• Lower noise level (&lt; 51 dB)
• Small footprint
• Low loading height for comfortable inserting rotor and samples
• Soft touch one-finger closure for ergonomic operation
• Automatic lid opening after running
• Rotor chamber made of stainless steel

These centrifuges are used with e.g. rotors for Eppendorf Tubes^® and PCR strips, rotors for microplates and 15 / 50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes^® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).

Microcentrifuge 5430

• 48 place centrifuge for 1.5ml / 2.0ml micro test tubes, 6 x 50 ml Falcon^® tubes or 2 x MTP plates
• Automatic rotor identification
• 12 different rotors (available as accessories)
• Stores up to 50 routine programs
• Menu guided operation in 4 different languages
• LCD display with backlighting
• Automatic lid opening following application sequence (only 5430)

• Temp. range: -11°C to +40°C
• +4°C at max. speed with all rotors
• Continues cooling after the centrifugation process
• Fast Temp for achieving required temperature in shortest possible time
• Fast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set time

These low-speed, universally applicable centrifuges are especially suited for low to medium sample throughput in cell culture applications.

• Compact with small footprint
• Maintenance-free motor
• Dial controls and digital display
• Powered lid locking
• Short braking time
• Automatic lid opening (model 5702 only
• Rotor bowl made of stainless steel
• Optimized: backwards adjusted air flow for sample cooling

• Two programme keys for saving the parameters of two standard centrifugation processes
• Adjustable acceleration rate and braking
• Temperature setting from -9 °C to 40 °C
• Stand-by cooling
• Fast-temp-function

• Software control for precise temperature control (depends on rotor)
• Active heating
• Stand-by heating
• Temperature derivation in stationary state at 4°C and at 37 °C ±1 °C

These centrifuges offer a flexible rotor program with a modular adapter system which can accommodate a high variety of tube lengths.

• Ergonomic access height gives comfortable rotor loading
• Low noise level
• Motorized lid lock
• Reliable cooling at maximum speed*
• Imbalance detector
• Automatic rotor recognition logs rotor performance parameters and prevents these being exceeded
• Optional user setting by speed, rcf or radius correction values
• Values can be changed during centrifugation
• Temperature setting from -9°C to 40°C*
• Standby cooling*
• Selectable programme memory for up to 34 individual user programmes
• Short-spin function, speed can be preselected
• Fast-cool function* for rapid cooling of the centrifuge chamber
• 10 gentle acceleration and braking profiles for sensitive sample material

These centrifuges offer a flexible rotor program with a modular adapter system which can accommodate a high variety of tube lengths.

• Ergonomic access height gives comfortable rotor loading
• Low noise level
• Motorized lid lock
• Reliable cooling at maximum speed*
• Imbalance detector
• Automatic rotor recognition logs rotor performance parameters and prevents these being exceeded
• Optional user setting by speed, rcf or radius correction values
• Values can be changed during centrifugation
• Temperature setting from -9°C to 40°C*
• Standby cooling*
• Selectable programme memory for up to 34 individual user programmes
• Short-spin function, speed can be preselected
• Fast-cool function* for rapid cooling of the centrifuge chamber
• 10 gentle acceleration and braking profiles for sensitive sample material

These centrifuges combine a high capacity and versatility. Its main swing-bucket rotor holds both conical tubes and plates, no need to change rotor buckets or adapters. The 5910 R centrifuge has a low access height for easy operation. The 5910 R centrifuge holds standard 1 liter Nalgene^® bottles.

• Plate rotor options for centrifugation of all types of MTP, PCR or Deepwell Plates
• Fixed-angle rotors for high-speed molecular biology applications in tubes from 0.2 to 50 ml
• Aerosol-tight Eppendorf QuickLock^® caps and lids allow fast and ergonomic lid locking
• Quiet operation (<59 db)
• Compact footprint
• Automatic rotor recognition and imbalance detection
• FastTemp function for quick pre-cooling and FastTemp pro^® function for automatic precooling based on pre-programmable time and date
• Standby cooling function holds temperature when centrifuge is not in use
• ECO shut-off engages after 8 hours (adjustable)

Due to the material separation at medium speeds, this midi centrifuge is ideal for all types of separation processes, such as in molecular biology. It can be used with standard 1.5 / 2 ml tubes as well as with PCR strips. The cover opens automatically at the press of a button.

• High-performance motor
• With metal cover
• Starts only when the cover is firmly closed
• Direct and easy setting of speed, rotational speed and programmes via membrane keypad

Low speed benchtop centrifuge for biomedical applications with changeable rotors for accommodating centrifuge tubes (10 to 15 ml or 50 ml) or standard 96-well microtitre plates. Suitable for a wide range of analytical applications including biomedical, bio-organic and immunoenzyme analysis.

• Easy set-up of spin speed and time via 2-line LCD display and push buttons
• Powerful and quiet motor (59.4 dBA) with soft start-up and run-down function
• Timer with automatic switch-off
• Automatic imbalance switch-off
• Lid lock when centrifuge is running
• Sturdy metal housing and lid
• Compact design with small footprint

Small centrifuge for the determination of fat in milk and dairy products acc. to Gerber or Babcock.

• Microprocessor control with actual display in minutes and seconds, adjustable from 1 to 99 minutes
• Heating with 2 segment advertisements, adjustable from 0 to 65 ° C
• Increased precision thanks to the controlled speed
• Unbalance shwitch-off in case of uneven filling or sudden glass breakage
• Incl. Rotor (aluminium) and bushing (brass)

The Compact Centrifuge Z 207 A is ideal for use with small sample sizes. Distinct control panel "Touch" function for easy operation, also when working with gloves.

• Microprocessor with large LCD display
• Permanent indication of pre-set and actual values
• Electrical lid lock
• Active imbalance-identification and cut off
• 10 acceleration and deceleration rates, possibility of unbraked deceleration
• Manufactured according to international safety regulations, i.e. IEC 61010
• Noise level &lt; 60 dBA at max. speed
• Adapter for tubes with low volume
• Quick-key for short runs
• Storage of up to 99 runs

These low-speed, universally applicable centrifuges are especially suited for low to medium sample throughput in cell culture applications.

• Extremely compact with small footprint
• Maintenance-free motor
• Dial controls and digital display
• Powered lid locking
• Short braking time
• Automatic lid opening (model 5702 only
• Rotor bowl made of stainless steel
• Optimized: backwards adjusted air flow for sample cooling

• Two programme keys for saving the parameters of two standard centrifugation processes
• Adjustable acceleration rate and braking
• Temperature setting from -9 °C to 40 °C
• Stand-by cooling
• Fast-temp-function

• Software control for precise temperature control (depends on rotor)
• Active heating
• Stand-by heating
• Temperature derivation in stationary state at 4°C and at 37 °C ±1 °C

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• 48 places for 1.5 / 2 ml tubes
• Max. speed: 19083 x g (max. 13000 rpm)
• QuickLock rotor lid
• Rotor and lid are autoclavable (121 °C, 20 min)
• Aerosol-tight

• For 6 x 8, 6 x 5 PCR tube strips, 48 x 0.2 ml individual PCR tubes
• Max. speed: 15294 x g (max. 12000 rpm)

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Max. speed: 3220 x g (max. 4000 rpm)
• Buckets, caps and adapters are all autoclavable (20 mins. at 121 °C)
• Only for 5810 / 5810 R

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• 30 place x 1.5 / 2 ml reaction tubes
• Max. speed 20800 x g (max. 14000 rpm)
• Rotors, lids and adapters are all autoclavable (20 mins. at 121 °C)
• Aerosol-tight centrifugation possible with rotor FA-45-30-11

Universal centrifuge for routine applications. Motorised lid latch enables one finger downward motion for easiest closing and locking of centrifuge lid.

• Intuitive touchscreen
• Auto-Lock™ Rotor exchange: Secure, ergonomic push-button rotor exchange in as little as 3 seconds
• ClickSeal™ Bucket Sealing System: System has glove-friendly, one-handed open/close capability
• SMARTSpin™ Technology: optimises the acceleration and braking process and compensates imbalances
• Front USB port

Microcentrifuge for standard molecular biology applications. The 18-position rotor is specially designed for low to medium volumes in 1.5 / 2.0 ml tubes and Microtainer^®. The compact centrifuge with low access height is characterized by extremely quiet operation.

• 18 place rotor for 1.5 / 2.0 ml tubes
• Lid opens automatically after spinning
• Very small profile, minimal bench space required
• Remarkably silent, even without rotor lid
• Standard, certified aerosol-tight rotor
• Convenient Eppendorf two-dial operation
• rpm/rcf converter
• Short-spin
• The patented compressor technology reduces vibration to a minimum
• Temperature range: 0 °C to 40 °C
• Low access height of 26 cm
• Keeps a constant 4 °C at max. speed
• Fast Temp for rapid pre-cooling of the centrifuge

Including Rotor lid.

FA-45-24-11
Certified aerosol-tight rotor for 24 x 1.5ml /2.0ml microcentrifuge tubes comes standard (max. 20238xg). Perfect for standard applications and centrifugation of biohazardous or radioactive samples. Aerosol-tight rotors are easily identified by a red lid screw.
FA-45-24-11-Special
Certified aerosol-tight rotor for 24 x 1.5ml /2.0ml tubes with special PTFE-coating for improved chemical resistance (e.g., when working with phenol or chloroform) and easy cleaning (max. 20238xg). Aerosol-tight rotors are easily identified by a red lid screw.
F-45-18-11-Kit
Innovative 18-place rotor for miniprep spin columns and 1.5/2.0 ml tubes. Designed with an extra high rim to support open tube lids during centrifugation, no more torn off lids (max. 18111xg).
F-45-32-5-PCR
Rotor for 4 x 8-tube PCR strips or 32 x 0.2ml PCR tubes quickly knocks down liquids and properly supports thin-walled PCR tubes (max. 18615 xg).

Microcentrifuge with exceptional versatility. These centrifuges are used with e.g. rotors for Eppendorf Tubes^® and PCR strips, rotors for microplates and 15/50 ml conical tubes, as well as a 48-place rotor, a 16-place rotor for Eppendorf Tubes^® 5.0 ml and a swing-out rotor (24 x 1.5 / 2.0 ml).

Microcentrifuge 5430

• Choice of 8 different rotors, e.g. MTP rotor, Falcon rotor for max. versatility
• 48 place centrifuge for 1.5ml/2.0ml micro test tubes, 6 x 50ml Falcon^® tubes or 2 x MTP plates
• Unique 30 130xg
• Automatic rotor recognition
• Stores up to 50 routine programs
• Menu guided operation in 4 different languages
• Automatic lid opening following application sequence (only 5430)

• Temp. range: -11°C to +40°C
• +4°C at max. speed with all rotors
• Continues cooling after the centrifugation process
• Fast Temp for achieving required temperature in shortest possible time
• Fast Temp pro for having the centrifuge refrigerated and ready-for-use at your desired pre-set time

Operation can be timed, continuous or momentary, using the "quick" button. Vibration free operation is ensured by an isolation system. In the event of a significant imbalance, operation of the centrifuge is automatically stopped. Deceleration at the end of a run is very quick, but will not disrupt samples. Supplied with a uniquely designed 24 x 1.5 ml/2.0 ml rotor that allows easy access to the tops of the sample tubes. Individual tube slots in the solid aluminum rotor support tubes along their length and contain the sample in the event of tube failure. The rotor is seated on a tapered shaft which facilitates easy removal for cleaning and autoclaving.

Adapters for smaller tubes and PCR strips -please oder separately.

The Spectrafuge^™ 24D combines innovations such as a unique, easy access rotor, exclusive multi-flow air cooling system and high performance drive with a digital microprocessor that precisely regulates operation. Parameters are selected with two "smart" knobs and values are shown on large, easy to read, LED displays. Speed can be set and displayed in rpm or g-force. Runs can be set timed, continuous or momentary.
The unique design of the 24-place rotor allows easy access to the tops of the tubes. An optional StripSpin™ adapter fits onto the rotor for spinning 0.2ml tubes and strips. A powerful, brushless motor quickly accelerates the rotor to set speed. Air enters the centrifuge through vents on the back of the housing and it is circulated in multiple directions to maximize cooling. The result is a cool running microcentrifuge that keeps samples close to ambient temperature, even during extended runs at maximum speed. For samples that require below ambient temperatures, the Spectrafuge 24D may be used in a cold room.

The Z 216 M and Z 216 MK are setting new standards in this centrifuge class. Capable of centrifuging up to 44 x 1,5 / 2,0 ml at each run. Due to their compact design and quiet running properties they are fitting perfectly in their working area. The powerful refrigeration system of Z 216 MK keeps samples at temperatures as low as 4°C during a continuous run at 20000 xg.

• Maintenance-free induction drive
• Microprocessor with large LCD Display
• Motor driven lid lock
• Active imbalance-identification and cut off
• Standstill cooling
• Audible signal at the end of each run
• Rapid acceleration and deceleration (see rotor data)
• Lowest sample temperature 4°C at 20000xg
• Noise level < 60 dBA at 20000xg
• Extremely compact with a space saving footprint
• Quick access to samples with a snap on lid
• Aerosol tight rotor option
• Manufactured according to international safety regulations, i.e. IEC 61010
• Distinct control panel

The Heraeus™ Pico™ & Fresco™ microcentrifuges from Thermo combine productivity, versatility, safety and convenience in a compact, easy to-use lab instrument. Available in 17000 x g and 21000 x g models, both the ventilated Heraeus Pico and the refrigerated Heraeus Fresco offer a range of rotors to support micro-volume protocols such as nucleic acid preparation, protein isolation and reaction set-up. Featuring a new 24 x 2ml rotor with a biocontainment lid certified by CAMR.

At the same time the Heraeus pico and Fresco convince with a high measure of user comfort: the improved control panel with clear display permits a simple programming during the equipment allows an easy cleaning itself. The new cap is arranged with an audible "clicks" and saftey locked for the complete centrifugatuion expiration. Particularly developed for laboratories,which use the 0.2ml to 2.0ml micro tubes, these micro centrifuges offer maximum productivity and user comfort with capacities from 12 to 48 tubes.

• High Productivity - Fast acceleration and deceleration time (12 seconds) means you can process more samples in less time
• User-friendly - fast and simple changes of rotors and tubes by a new user friendly Design
• Safe - singular "Click CLOSE" - cap system for aerosol-tight inclusion of the biological substances guarantees the security of the user
• Comfortable - simple fast attitude of the run parameters and a clearly arranged display
• Multifunctional - selecting it from a broad pallet of rotors, which includes a Biocontainment rotor, a PCR rotor and a micro litre rotor with high sample capacity

Adapter for the following fixed-angle rotors:
F-45-12-11
F-45-18-11
F-45-24-11
F-45-30-11
FA-45-24-11
FA-45-30-11
FA-45-48-11
FA-30 x 2
FA-48 x 2

General purpose centrifuge for routine applications.Motorised lid latch enables one finger downward motion for easiest closing and locking of centrifuge lid.

• Intuitive full color touch screen
• Up to 100 program storage
• Display of set and actual parameters
• Easily adjust speed, time and temperature, even during the run
• Auto-Lock™ III rotor system: Secure, ergonomic push-button rotor exchange
• ClickSeal™ Bucket Sealing System: System has glove-friendly, one-handed open/close capability
• SMARTSpin™ Technology: optimises the acceleration and braking process and compensates imbalances

With a wide range of accessories, the Z 32 HK high speed centrifuge is applicable in a wide variety of research settings. In spite of the remarkably small footprint, the Z 32 HK features a powerful refrigeration system capable of maintaining cool sample temperatures even at maximum speed.

• Maintenance-free induction drive
• Microprocessor with large LCD display
• Motor driven lid lock
• Automatic rotor identification system with over speed protection immediately upon rotor installation
• Active imbalance identification and cut off rotor specific
• Imbalance tolerant drive
• CFC-free refrigeration system
• A large variety of rotors and accessories
• Manufactured according to international safety regulations, i.e. IEC 61010
• Audible signal at the end of each run with several melody options
• Quick and easy rotor exchange
• Noise level under 60dBA at max. speed
• Distinct control panel

Swing-out rotor A-4-38 (centre of illustration) accelerates up to four 85 ml round buckets to approximately 3000 xg. Max. speed 4400 rpm. Square buckets for up to 24 x 15 ml vessels are offered for applications with high throughputs.
The fixed angle rotor F-35-30-17 is available in two different versions with a capacity up to 30 x 15 ml.
The simple swing out rotor A-8-17 for 8 x Falcon^® tubes completes the range.

Rotor lids included.

FA-45-48-11: Standard rotor for 48 x 1.5/2.0ml tubes, aerosol-tight, Eppendorf QuickLock^® closure
F-45-48-11: Rotor for 48 x 1.5/2.0ml tubes
FA-45-16-17: Fixed angle rotor for 16 x Eppendorf Tubes^® 5.0 ml, aerosol-tight, Eppendorf QuickLock^® closure
FA-45-30-11: Fixed angle rotor, 30 x 1.5/2.0ml tubes, incl. aluminium lid, coated, aerosol-tight. Rotor is autoclavable
F-45-30-11: Fixed angle rotor, 30 x 1.5/2.0ml tubes, coated, aerosol-tight. Rotor is autoclavable
FA-45-24-11-Kit: Kit-Rotor for 24 Spin Columns or 1.5/2.0ml tubes, aerosol-tight. Rotor for centrifugation with open tube lids
F-35-6-30: Falcon^®rotor for 6 x 15/50ml tubes, incl. adapter
A-2-MTP: Swing out rotor for MTP or PCR plates, incl. 2 x MTP buckets, max. loading height 29mm
S-24-11-AT: Swing out rotor for 24 x 1.5/2.0 ml tubes, aerosol-tight

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Incl. 2 buckets
• Various combinations of stacked plates can be centrifuged
• Max. loading height 89 mm
• Simultaneous processing of up to 192 samples
• Max. speed 2250 x g (max. 3700 rpm)
• Rotors and carriers are autoclavable (20 mins. at 121 °C)

• Incl. 2 buckets, 2 aerosol-tight caps and 2 plate carriers
• Various combinations of stacked plates can be centrifuged
• Max. loading height 67 mm (89 mm without caps)
• Max. speed 3486 x g (max. 4500 rpm)
• Rotors and carriers are autoclavable (121 °C, 20 min.)

These universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design. Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 24325 xg, turning these table top centrifuges Z 366 and Z 366 K into universal high-powered centrifuges.

• Maintenance-free induction drive
• Microprocessor with large LCD Display
• Motor driven lid lock
• Automatic rotor identification system with over speed protection, immediatley upon rotor insertion
• Active imbalance-identification and cut off
• CFC-free refrigeration system
• A large variety of rotors and accessories
• Manufactured according to international safety regulations, i.e. IEC 61010
• Audible signal at the end of each run with several melody options
• Rotor exchange is easy to handle
• Noise level < 63 dBA (depends on rotor)
• Optimized airflow system keeps the samples cool

Cooled and uncooled table centrifuge for a variety of different vessels due to a wide range of various rotors.

• Maintenance-free induction drive
• Micropocessor with large LCD display
• Motor driven lid lock
• Automatic rotor identification system with over speed protection, immediately upon rotor insertion
• Active imbalance identification and cut off (rotor-specific)
• CFC-free refrigeration system
• A large variety of rotors and accessories
• Audible signal at the end of each run
• Permanent display of target and actual value
• 10 acceleration and 10 braking profiles
• Memory for 99 complete runs, incl. rotor type
• Noise level < 65 dBA (depend on rotor)
• Manufactured according to international safety regulations, i. e. IEC 61010
• Stainless steel chamber

Multipurpose centrifuge for the dairy laboratory.

• Timer 0 to 255 minutes
• Automatic brake
• Heating (option) with variable temperature setting up to 65 °C (1200 W)
• Microprocessor control with an LED display to show speed, run time, temperature and error messages
• Cover lock
• Unbalance cut-off
• Emergency release

• Gerber Butyrometers (350 x g )
• Solubility in milk powder (164 x g)
• Extraction tubes Roese-Gottlieb/Mojonnier (80 x g)
• 1 variable speed range (200 to 1100 rpm), on request