The reusable cooling packs are very handy due to their dimensions (W x H x D) of only 168 x 24 x 85 mm and their weight of 260 g. They can be used for all laboratory and transport applications. The packs are delivered filled, welded, and can be used several times. The cooling packs can be ordered individually or in cartons of 50 pieces for larger requirements. They can be used in direct contact with food according to Directive 2005/79/EU and Regulation (EU) 10/2011.

The LABSOLUTE® pouring rings made of PP are the perfect complement to all clear and amber laboratory glass bottles with GL32 or GL45 thread. Autoclavable at 121 °C.

Accessories Laboratory bottles, clear, with PBT screw caps Accessories Laboratory bottles, clear, with PP screw caps Accessories Laboratory bottles, amber, with PP screw caps Accessories Screw caps, PP Alternative Pouring rings and screw caps, PBT

LABSOLUTE® microscope slides made of soda-lime glass comply with DIN ISO 8037-1 and 8037-2. This means they are the ideal solution for excellent and reproducible microscopy results. The microscope slides, measuring approx. 76 x 26 mm, have a thickness of around 1 mm and are delivered pre-cleaned and ready for use. The 20 mm wide, coloured or colourless frosted area is at one end on one side.

Cut microscope slides are particularly economical and therefore represent an excellent alternative to the ground versions, for routine tasks. The corners and edges are 90° for all cut microscope slides.

Accessories Cover glasses, rectangular, thickness 1 (0.13 - 0.16 mm) Accessories Microscope slide folders, cardboard Accessories Microscope slide boxes, PS Accessories Staining jar acc. to Coplin Accessories Slide mailers Accessories Slide dispenser Alternative Microscope slides, ground edges Alternative Adhesion slides for tissue sections

The powder-free, lavender blue LABSOLUTE® disposable gloves Sensitive made of nitrile are flat with a rolled cuff and offer excellent elasticity and wearing comfort. A special after-treatment makes these LABSOLUTE® disposable gloves skin friendly and easy to put on. The gloves have textured finger tips.

The LABSOLUTE® nitrile gloves with an AQL value of 1.5 comply with the following standards and directives

- EN ISO 21420, EN ISO 374-1, -2, -4, -5 and EN 16523-1

• (EU) 2016/425 (PPE in accordance with CE category III for complex risks)
• 1935/2004 (can be used in direct contact with food)
• ASTM 1671 / ISO 16604 (viral penetration)

Further properties:

• Approved for the use within Hazard Analysis and Critical Control Points (HACCP) concepts
• Resistance against ethidium bromide (1 %) for more than 480 min (level 6)
• Delivered in handy dispenser boxes of 200 (XS, S, M, L) or 180 pieces (XL)
• Free from phthalates, softeners and allergenic latex proteins
• Storage life: 5 years
• Length: approx. 240 mm
• Thickness (double): finger min. 0.14 mm, palm min. 0.12 mm, cuff min. 0.10 mm
• Can be worn on the left or right hand

Accessories Holder for glove boxes, stainless steel Alternative Disposable gloves, nitrile Protective, powder-free Alternative Disposable gloves, latex, powder-free

The LABSOLUTE® laboratory wipes made of non-chlorine bleached cellulose are especially low-lint and soft.

The holder is suitable for hygienic and easily accessible storage of the laboratory wipes. It is delivered including wall mounting material.

Accessories Holder for glove boxes, stainless steel

LABSOLUTE® offers a complete assortment for your pipetting tasks - no matter whether packed in bags, within racks or as an efficient refill system: all pipette tips are part of a system in which the components can be exchanged. The pipette tips are made of pure PP and comply with EN ISO 8655. In combination with the LABSOLUTE® pipettes, they constitute the perfect pipetting unit. Thanks to their universal fit and the high-quality material, the tips guarantee a firm and absolutely tight hold on various pipette models. And all this with much less attachment and ejection forces. The fully automated production and packaging of the pipette tips under clean room conditions guarantee completely contamination-free working conditions with products which are certified free of DNase, RNase, human DNA and pyrogens - to ensure reproducible and consistent results.

• High quality standard
• Graduated tips: the volume is visible at first glance
• 200 and 1000 µl tips are available in yellow or blue, respectively
• Autoclavable

Our pipette tips boxes for comfortable and efficient pipetting:

• Simple-to-use closure for single-handed opening
• The transparent design provides a complete overview of the tips
• Coloured trays enable fast recognition of the volume
• Refill system: easy and fast removal and replacement of the trays
• Stackable boxes for space-saving and safe storage
• Autoclavable at 121 °C

LABSOLUTE® filter tips offer dual protection! The fine-pored filter made of PE serves as a defence to protect the samples from aerosols and biomolecules. At the same time, the hydrophobic material prevents the pipette from contamination. Delivered in stackable and stable racks.

0.1-10 XL/20 µl tips (7.695 881) are compatible with 20 µl Eppendorf Reference®, Eppendorf Research® Plus and Brand Transferpette®.

Accessories Single-channel pipettes Accessories Single-channel pipette starter sets Accessories Eight-channel pipettes Accessories Twelve-channel pipettes Alternative Pipette tips without aerosol barrier in racks, sterile

Crimp neck vials and micro-vials ND11 made of clear and amber first hydrolytic class glass are used as standard in GC and HPLC. A large selection of micro-inserts is available for these vials.

Accessories Micro-inserts for vials with wide opening, glass Accessories Vial racks, acrylic Accessories Vial racks, PP Accessories ND8, ND9, ND10, ND11 - 81 positions Accessories With natural rubber / TEF septa Accessories With RedRubber / PTFE septa Accessories With butyl / PTFE septa Accessories With silicone / PTFE septa Accessories With aluminium septa Alternative Snap ring vials and micro-vials ND11, wide opening Alternative Snap ring vials and micro-vials ND11, PMP or PP Alternative Screw neck vials and micro-vials ND8, small opening Alternative Short thread vials and micro-vials ND9, wide opening Alternative Screw neck vials and micro-vials ND10, wide opening Alternative Kits ND11, crimp neck Alternative Vase vials Alternative Vials with directly closable micro-insert

LABSOLUTE® Petri dishes are made of crystal-clear polystyrene and offer excellent optical clarity. The Petri dishes are manufactured and packaged under aseptic conditions; the sterile versions are additionally beta-irradiated.

The dishes with ventilation lugs support gas exchange and reduce the formation of condensation.

The dishes without ventilation lugs decrease gas exchange, which slows down drying and therefore offers advantages for long-term experiments or extended storage.

The 90 mm Petri dishes, item numbers 7696390 to 7696393, are manufactured entirely using certified green electricity. Local production in Germany ensures short delivery routes, keeping the overall ecological footprint of the Petri dishes low.

• Optimal stackability
• Temperature-resistant from -40 to 70 °C

Packed in inner units of 10 dishes (Ø = 60 and 150 mm), 15 dishes (Ø = 55 mm), or 20 dishes (Ø = 90 mm).

Accessories Rack for Petri dishes, acrylic Accessories Disposable spatulas, L- and T-shaped, PS Accessories Disposable inoculation loops, sterile Alternative Petri dishes, soda-lime glass

All LABSOLUTE® clear and amber volumetric flasks with accuracy class A comply with the DIN EN ISO 1042 standard. They are made of high-quality borosilicate glass 3.3 and calibrated to "In" (20 °C). All volumetric flasks are supplied with suitable stoppers made of glass or PE. A batch-specific certificate of conformity can be supplied on request.

Accessories Stoppers, HDPE Accessories Hollow glass stoppers, type C, borosilicate glass 3.3 Alternative Volumetric flasks, class A, with hollow glass stopper, blue graduation Alternative Volumetric flasks, amber, class A, with PE stopper, white graduation Alternative Volumetric flasks, trapezoidal, class A, with PE stopper, blue graduation

CHEMSOLUTE® test strips are ideal for determining water hardness, the semi-quantitative detection of ions and acids and cleaning inspection.

• Fast and reliable detection
• Dip, compare - done
• Certified quality

The LABSOLUTE® dishes are made from aluminium and exhibit a stable form. All models have a smooth bottom which guarantees a safe standing. They can be used in direct contact with food.

Alternative Sample dishes with handle, aluminium

The ready-to-use buffer solutions from CHEMSOLUTE® are renowned for their quality and ease of use.

- Accuracy ±0.02 pH units, reference temperature 20 °C

• Traceable to the National Institute of Standards and Technology (NIST)
• In PP bottles
• The dyed buffer solutions allow easy identification

LABSOLUTE® offers a complete assortment for your pipetting tasks - no matter whether packed in bags, within racks or as an efficient refill system: all pipette tips are part of a system in which the components can be exchanged. The pipette tips are made of pure PP and comply with EN ISO 8655. In combination with the LABSOLUTE® pipettes, they constitute the perfect pipetting unit. Thanks to their universal fit and the high-quality material, the tips guarantee a firm and absolutely tight hold on various pipette models. And all this with much less attachment and ejection forces. The fully automated production and packaging of the pipette tips under clean room conditions guarantee completely contamination-free working conditions with products which are certified free of DNase, RNase, human DNA and pyrogens - to ensure reproducible and consistent results.

• High quality standard
• Graduated tips: the volume is visible at first glance
• 200 and 1000 µl tips are available in yellow or blue, respectively
• Autoclavable

Our pipette tips boxes for comfortable and efficient pipetting:

• Simple-to-use closure for single-handed opening
• The transparent design provides a complete overview of the tips
• Coloured trays enable fast recognition of the volume
• Refill system: easy and fast removal and replacement of the trays
• Stackable boxes for space-saving and safe storage
• Autoclavable at 121 °C

The 0.1-10 XL/20 µl tips (7.695 861) are compatible with 20 µl Eppendorf Reference®, Eppendorf Research® Plus and Brand Transferpette®.

Accessories Pipette tips refill system, non-sterile Accessories Single-channel pipettes Accessories Single-channel pipette starter sets Accessories Eight-channel pipettes Accessories Twelve-channel pipettes Alternative Pipette tips in bags, non-sterile Alternative Pipette tips without aerosol barrier in racks, sterile Alternative Filter tips in racks, sterile

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.

Alternative Wide-mouth bottles, natural, HDPE Alternative Wide-mouth bottles, amber, HDPE Alternative Wide-mouth bottles, natural, PP Alternative Narrow-mouth bottles, natural, LDPE

LABSOLUTE® laboratory bottles are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. They comply with EN ISO standard 4796-1. The bottles have a retrace code, a durable volume scale as well as a GL45 thread (GL32 thread for 50 ml bottles). The bottles as well as the closures are resistant against a wide range of chemicals.

With blue pouring rings and screw caps made of PP with integrated lip seal. Autoclavable at 121 °C for a maximum of 20 minutes. The transparent coating leads to a higher resistance of the bottles against strikes and shocks, and prevents leaking in case of bottle breaking.

The transparent LABSOLUTE® multipurpose containers made of PP are ideally suited for storing solids and liquids. Delivery includes an HDPE screw cap.

• Autoclavable (without lid)
• 120 ml / 60 ml: with graduation and labeling field (graduation up to 100 ml / 50 ml)
• 200 ml: without graduation and labeling field
• Raw material complies with the requirements of Regulation (EC) No 1935/2004 and Regulation (EU) No 10/2011 for food contact materials

Alternative Sample containers, PP Alternative Sample beakers, non sterile, bulk packaging Alternative Sample beakers, sterile, individually packed Alternative Sample beaker graduated, PP

The cell culture flasks from LABSOLUTE® are made exclusively of PS, corresponding to the highest international standards (USP Class VI). A short, wide and angled neck allows an easy handling while the risk of contamination is minimized. The treatment of surfaces allows adherent cells a uniform and even cell adhesion.

• Short and wide sloping neck for easy access
• Easily stackable
• Both flasks sides have engraved graduation with a labelling area
• Screw cap with a hydrophobic 0.22 μm filter for ventilation
• Packed upright in resealable bags
• Surface is treated with vacuum gas plasma
• Sterilized by radiation (SAL 10^-6)

Accessories Cell scrapers and cell lifters, sterile Alternative Cell culture dishes, treated, sterile, PS Alternative Cell culture multiwell plates, treated, sterile, PS

The practical LABSOLUTE® wide-mouth bottles made of LDPE, HDPE or PP are particularly easy to fill and clean due to their wide opening. With 100 % tightly closing screw lids made of PP, they are ideal for shipping and storing liquid, powdery and paste-like samples.

Autoclavable at 121 °C.

Alternative Wide-mouth bottles, natural, LDPE Alternative Wide-mouth bottles, natural, HDPE Alternative Wide-mouth bottles, amber, HDPE Alternative Narrow-mouth bottles, natural, PP

Crimp neck and headspace vials ND20 with rounded or flat bottom made of clear and amber first hydrolytic class glass need to be able to withstand very high internal pressures and, as a result, their walls are generally 1.2 mm thick. The vials are available with a flat DIN crimp neck or with a bevelled neck (HS neck).

On the flat DIN crimp neck, liners have a greater contact surface, which ensures a better seal. A bevelled HS neck is required if the overpressure safety seal system patented by Perkin Elmer is used, since excess pressure can only be reliably dissipated in vials with an HS neck.

Accessories Vial racks, acrylic Accessories ND13, ND18, ND20 Headspace, ND24 (EPA) Accessories 22 x 9.1 mm, 4.3 mm centre hole Accessories 22 x 9.1 mm, 6.0 mm centre hole Accessories 22 x 8.4 mm, 4.3 mm centre hole Accessories With chloro-butyl septa Accessories With bromo-butyl / PTFE septa Accessories With bromo-butyl / PTFE septa, Pharma-Fix Accessories With silicone / PTFE septa, Ultraclean Accessories With silicone / PTFE septa, HT quality Accessories With silicone / aluminium septa Accessories Without septa Alternative Crimp neck and headspace vials ND20 / ND40, special dimensions

LABSOLUTE® laboratory bottles are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. They comply with EN ISO standard 4796-1. The bottles have a retrace code, a durable volume scale as well as a GL45 thread (GL32 thread for 50 ml bottles). The bottles as well as the closures are resistant against a wide range of chemicals.

With blue pouring rings and screw caps made of PP with integrated lip seal. Autoclavable at 121 °C.

Accessories Screw caps, PP Accessories Pouring rings, PP Accessories Pouring rings and screw caps, PBT Alternative Laboratory bottles, clear, with PBT screw caps Alternative Laboratory bottles, amber, with PP screw caps

LABSOLUTE® beakers with durable volume scale and spout are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The beakers in low and high form comply with DIN 12331 and ISO 3819. They are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Alternative Beakers, low form, borosilicate glass 3.3

The transparent LABSOLUTE® multi-purpose containers made of PP are ideally suited for the storage of solids and liquids. Supplied with a screw cap made of HDPE.

• Autoclavable (without lid)
• 120 ml / 60 ml: with graduation and labelling field (graduation up to 100 ml / 50 ml)
• 200 ml: with graduation (up to 180 ml in 10 ml steps and 0.5 to 6.0 oz in 0.5 oz steps), total volume: 200 ml
• 200 ml: without graduation and labelling field
• Raw material complies with the requirements of Regulation (EC) No 1935/2004 and Regulation (EU) No 10/2011 for food contact materials

200 ml sample container with graduation - with a practical click sound that acoustically confirms correct closure.

Alternative Sample containers, PP Alternative Sample beakers, sterile, individually packed Alternative Sample beakers, sterile, bulk packaging Alternative Sample beaker graduated, PP

These high-quality CHEMSOLUTE® electrolyte solutions are perfectly suited to the secure and reliable maintenance and care of electrodes.

• Ideal for topping up and replacing reference electrolyte solution in pH electrodes
• Suitable for long-term wet storage of the electrodes
• Traceable to SRM from the National Institute of Standards and Technology (NIST)

The LABSOLUTE® graduated and volumetric pipettes are made of soda-lime glass and have a batch identification. A batch-specific certificate of conformity is available on request.

Calibration
The graduated and volumetric pipettes are calibrated to "Ex" (+5 seconds) so that the draining volume of liquid corresponds to the printed volume specification after five seconds.

Accuracy class AS
All LABSOLUTE® graduated and volumetric pipettes satisfy the criteria of the highest accuracy class A. The tolerance lies within the standard defined for class A. The suffix "S" means rapid draining. The draining time is between 5 and 20 seconds, depending on the nominal volume, as opposed to 10 to 60 seconds with class A.

Durable labelling
All information is imprinted in brown diffusion dye. This dye is burned into the surface of the glass and can only be destroyed by glass erosion. The labelling is therefore unaffected by chemicals and cleaning agents.

According to DIN EN ISO 835.

Accessories Pipette stand, vertical, 94 positions, PP Accessories Safety pipette fillers, natural rubber Accessories Pipette controller Alternative Graduated pipettes, class AS, type 2, amber graduation

The LABSOLUTE® Demeter pipettes are special serological pipettes for milk analysis to create dilution series for bacteriological tests.
The Demeter pipettes made of crystal-clear PS are supplied packed in vacuum bags with 25 pieces each.

• Free of DNase, RNase and pyrogens
• Not cytotoxic
• Gamma sterilized (SAL 10^-6)

Accessories Pipette controller Accessories Safety pipette fillers, natural rubber Alternative Serological pipettes, sterile, PS Alternative Serological pipettes, short version, sterile, PS Alternative  Alternative Serological pipettes, sterile, PS, bulk

The LABSOLUTE® Erlenmeyer flasks with a durable volume scale are made of high-quality borosilicate glass 3.3 and are therefore extremely temperature-resistant up to 500 °C. The wide-neck and narrow-neck flasks, as well as the flasks with standard ground joint comply with the valid standards. The flasks are resistant to cold lyes/alkaline solutions and strong acids, with the exception of hydrofluoric acid and hot, concentrated phosphoric acid.

Comply with DIN EN ISO 24450.

Alternative Erlenmeyer flasks, narrow-neck, borosilicate glass 3.3 Alternative Erlenmeyer flasks, with standard ground joint, borosilicate glass 3.3

The calibration vessel, integrated into the CHEMSOLUTE® twin neck dispensing bottles, allows the particularly economical dispensing of solution and prevents contamination.

- Accuracy ±0.010 pH units, reference temperature 25 °C

• Traceable to the National Institute of Standards and Technology (NIST)
• Comply with DIN 19266

Crimp and headspace seals ND20 are made of aluminium and are supplied with fitted septa made of a variety of materials. There are the following different types of caps available:

Plain caps with a 10 mm center hole. These caps are suitable for standard applications. They are available in several colours on request.

Clear lacquered caps, so called headspace caps, with a special score line that breaks when the internal pressure reaches 3.0 ± 0.5 bar. The excess pressure is then released, and the risk of the vial exploding can be avoided.

Clear lacquered centre tear-off caps and complete tear-off caps. These caps are available in several colours on request.

Gold lacquered, magnetic crimp caps with 5 mm centre hole to be used with CE HS500/HS800, CTC 500, as well as Fisons HS500 / HS800 instruments.

Gold lacquered, magnetic crimp caps with 8 mm centre hole to be used with CTC Combi PAL instruments.

Red lacquered, magnetic bimetal crimp caps with 8 mm centre hole to be used with CTC Combi PAL instruments.

These grey septa are temperature-resistant from -40 °C to 120 °C and have excellent chemical properties. They are 3.0 mm thick and have a hardness of 50° shore A.

Also on Pharma-Fix seals, it is only the butyl areas that can come into contact with the sample, and these are PTFE coated. The areas that abut the edges of the glass are not coated. This ensures a particularly good seal.

Accessories Crimping tools Accessories Decapping tools Accessories Crimping tools Accessories Decapping tools Accessories Crimping tool, pneumatic, manual Accessories Crimp neck and headspace vials ND20 Accessories Crimp neck and headspace vials ND20 / ND40, special dimensions Alternative With chloro-butyl septa Alternative With bromo-butyl / PTFE septa Alternative With silicone / PTFE septa, Ultraclean Alternative With silicone / PTFE septa, HT quality Alternative With silicone / aluminium septa Alternative Without septa Alternative With Viton septa

With the LABSOLUTE® destruction bags made of PP, contaminated laboratory items can be disposed of safely. The 50 µm thick film and the extra‑?wide bottom seam give the bags exceptionally high tear resistance. The bags in the 200 x 300 ?mm size are packaged in a convenient dispenser box.

Autoclavable up to 134 °C. For autoclaving, the bags must only be slightly closed.

Accessories Holder for disposal bags Alternative Disposal bags, highly transparent, PP

Short thread screw seals ND9 are made of PP and are supplied with fitted septa made of a variety of materials. They have a 6 mm centre hole and are available in different colours. The screw caps are similar in shape to the crimp caps and are therefore also suitable for robotic handling.

These septa are temperature-resistant from -60 °C to 200 °C and have better purity than septa made of natural rubber, butyl or red rubber. However, they have less effective resealability properties and are therefore more suitable for single-injection applications. Septa with a double-sided PTFE coating show a very low particle formation during penetration.

Accessories Short thread vials and micro-vials ND9, wide opening Accessories Short thread vials and micro-vials ND9, SureStop Accessories Short thread vials and micro-vials ND9, PMP or PP Alternative With natural rubber / TEF septa Alternative With RedRubber / PTFE septa Alternative With pure PTFE septa Alternative With silicone / PTFE septa, Ultrabond Alternative With silicone / PTFE septa, magnetic Alternative MS short thread screw seal ND9

LABSOLUTE® offers a complete assortment for your pipetting tasks - no matter whether packed in bags, within racks or as an efficient refill system: all pipette tips are part of a system in which the components can be exchanged. The pipette tips are made of pure PP and comply with EN ISO 8655. In combination with the LABSOLUTE® pipettes, they constitute the perfect pipetting unit. Thanks to their universal fit and the high-quality material, the tips guarantee a firm and absolutely tight hold on various pipette models. And all this with much less attachment and ejection forces. The fully automated production and packaging of the pipette tips under clean room conditions guarantee completely contamination-free working conditions with products which are certified free of DNase, RNase, human DNA and pyrogens - to ensure reproducible and consistent results.

• High quality standard
• Graduated tips: the volume is visible at first glance
• 200 and 1000 µl tips are available in yellow or blue, respectively
• Autoclavable

Our pipette tips boxes for comfortable and efficient pipetting:

• Simple-to-use closure for single-handed opening
• The transparent design provides a complete overview of the tips
• Coloured trays enable fast recognition of the volume
• Refill system: easy and fast removal and replacement of the trays
• Stackable boxes for space-saving and safe storage
• Autoclavable at 121 °C

The 0.1-10 XL / 20 µl tips (7.695 841) are compatible with 20 µl Eppendorf Reference®, Eppendorf Research® Plus and Brand Transferpette®.
Bevelled tips (7.695 842 and 7.695 843): due to the bevelled end the contact surface of the pipetted liquid is reduced and less residual liquid remains at the tip.
Item 7.695 856 is delivered in a useful folded box.

Accessories Pipette tips boxes Accessories Pipette tip boxes - new generation Accessories Single-channel pipettes Accessories Single-channel pipette starter sets Accessories Eight-channel pipettes Accessories Twelve-channel pipettes Accessories Racks for 5 ml and 10 ml pipette tips Accessories Pipette stand with dual bins for pipette tips, acrylic Alternative Pipette tips without aerosol barrier in racks, non-sterile Alternative Pipette tips refill system, non-sterile Alternative Pipette tips without aerosol barrier in racks, sterile Alternative Filter tips in racks, sterile

The LABSOLUTE® screw caps with integrated lip seal made of PP are the perfect complement for all clear and amber laboratory glass bottles with GL32 or GL45 thread. There is no additional seal required. Autoclavable at 121 °C.

Accessories Laboratory bottles, clear, with PBT screw caps Accessories Laboratory bottles, clear, with PP screw caps Accessories Laboratory bottles, amber, with PP screw caps Accessories Pouring rings, PP Alternative Pouring rings and screw caps, PBT

CHEMSOLUTE® sea sand is suitable for various applications, including chromatography.

• Acid washed and calcined

The calibration vessel, integrated into the CHEMSOLUTE® twin neck dispensing bottles, allows the particularly economical dispensing of solution and prevents contamination.

- Accuracy ±0.02 pH units, reference temperature 25 °C

• Traceable to standard reference material of the National Institute of Standards and Technology (NIST)
• Easily identifiable due to colour coded buffer solutions
• Free from borates or other dangerous substances

BIOSOLUTE® agar in bottles for pouring of plates for the enumeration and detection of microorganisms.
BIOSOLUTE® ready-to-use culture media are produced automatically under modern clean room conditions and are subject to strict quality control to ensure the highest standards. Manufacturing is carried out in ISO 9001 and ISO 13485 certified production facilities.

Quality control follows ISO 11133, performance tests for solid culture media are performed in an ISO 17025 certified testing laboratory.

• Storage at room temperature
• Minimum shelf life 12 to 18 months
• Plastic lids suitable for microwaves

BIOSOLUTE® liquid ready-to-use media are produced automatically under modern clean room conditions and are subject to strict quality control to ensure the highest standards. Manufacturing is carried out in ISO 9001 and ISO 13485 certified production facilities.
Quality control follows ISO 11133, performance tests for solid culture media are performed in an ISO 17025 certified testing laboratory.

• Pre-enrichment, dilution or for sterility control.
• Storage at room temperature
• Minimum shelf life 12 to 18 months
• Screw cap with septum

BIOSOLUTE® ready-to-use microbiological culture media in 90 mm plates are available in a wide selection for a variety of applications. These ready-to-use agar plates with a filling volume of 21 ± 2 ml are packed in cellophane bags of 10 ready-to-use plates each.

• produced under cleanroom conditions
• high quality raw materials
• high batch consistency
• quality control according to ISO 11133

BIOSOLUTE® Prepared plates (90 mm) for hygiene testing are ready-to-use agar plates with a filling volume of 21 ± 2 ml. The plates are packed in BOPP bags with 10 plates each. BOPP stands for biaxially oriented polypropylene. These bags are highly transparent and are particularly tear and impact resistant. The double or triple packaging makes these plates suitable for use in cleanrooms or isolators.

High safety level

• Produced at cleanroom conditions
• Quality control according to Ph.Eur./ISO 11133
• Lateral labelling of the plates with Data Matrix Code (DMC)
• DMC incl. name of medium, batch, MHD, serial number of plate

Store at your work place

• Storage at room temperature
• Long shelf life

BIOSOLUTE® ready-to-use contact plates with a wide range of applications for detecting microbial colonization. BIOSOLUTE® contact plates feature an agar surface that is slightly convex and curved over the edge of the Petri dish. With a size of 55 mm, they come in a practical blister of 6 plates each and are thus individually packaged. The blisters are each double packed in a cellophane bag or - for use in cleanrooms - triple packed in two cellophane bags.

• Produced under cleanroom conditions
• Quality control according to ISO 11133
• Storable at room temperature
• Long shelf life

BIOSOLUTE® ready-to-use plates size 90 mm for the monitoring of microbiological contamination of surfaces and air in cleanrooms, isolators, food industry and hospitals. For the hygiene control in the presence of disinfectant residues choose BIOSOLUTE® media with disinhibitors (TLHTh), they contain the four neutralizers histidine, lecithin, polysorbate 80 and sodium thiosulfate. The bags of 10 plates are double or triple packed in cellophane bags.

• Produced under clean room conditions
• With irradiation indicator
• Quality control according to ISO 11133

RT articles: Store at your work place

• Storage at room temperature
• Long shelf life
• RD Box, reclosable solid plastic box with 2x 5 plates