Vandbade

Pellets with 20 mm diameter. Can cover 0.1 m². Protect against evaporation and rapid temperature loss. Decreases hazardous vapors. Resistant against most acids, bases, solvents and mineral oils. Temperature stable up to 100 °C.

General purpose water baths with stable temperature control, simple controls and fast heat up. A choice of four models with a base tray and lid included as standard.

• Ambient +5 °C to 95 °C
• Unique Set and Forget™ technology, fast reliable temperature control
• Stability ± 0.5 °C
• Simple, intuitive controls, quick and easy to set temperature
• Drain tap on 12L, 18L and 26L baths
• Practical front panel lock - disables front panel controls preventing unintentional temperature changes
• 3-year warranty

For use with Immersion circulator LX and MX.

Flat cover: Flat stainless steel cover with openings and concentric ring sets
Gable cover: Stainless steel gable cover, also suitable for shaking device and Peltier cooling device
Shaking device: Shaking device including support frame (for racks or support basket with perforated mounting shelf) for use in water baths, shaking speed 35-160 strokes per minute (horizontal back/forth movement), requires gable cover
Peltier-cooling device CDP115: For precise operation with temperatures starting from +10 °C. The temperature is controlled via the electronic controller of the waterbath with a precision of ±0.1 K. Easy fitting to bath by snap-on-technology, suitable for all tank sizes. Power supply: 230 V, 50/60 Hz or 115 V, 60 Hz (please state in case of order). Effective cooling capacity: 115W. Pumping capacity of circulation pump for coolant: 600ml/min
Bottom grid: reversible for 2 heights (30 mm and 60 mm)

The unstirred, general purpose water baths are available in 5 sizes: 2, 5, 10, 20 and 28 liters.

• Color TFT display with control panel
• Calibration offset feature
• Low liquid alarm
• Over temperature alarm
• 5 user programmable pre-sets (temperature and duration)
• 5 languages (English, German, French, Spanish and Chinese)
• Integrated independent timer
• Eco-mode
• Safety thermostat
• High-gabled, clear lids accommodate taller media bottles
• Rear-mounted drain (10, 20 and 28 liters)
• Recessed Handles

Flat lid for unstirred water baths. With ring sets of variable hole diameter to accommodate tall vessels whilst reducing evaporation.

An ideal choice for schools and colleges requiring a basic simple-to-use quality water bath. Base tray included as standard. A great value range consisting of three models.

• Ambient + 5 °C to 95 °C
• Unique Set and Forget™ technology, fast heat-up, reliable temperature control
• Stability ± 0.5 °C
• Simple, intuitive controls, quick and easy to set temperature
• Practical front panel lock, disables front panel controls preventing unintentional temperature changes
• 3 year warranty

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.01 °C
• Intuitive 3.75" (9.5 cm) display with touch-pad control
• 4 languages: French, German, Spanish, English
• Swivel 180™ Rotating Controller
• Variable speed pump with open- and closed-loop external circulation capability
• Pump pressure max. 3.6 psi (0.25 bar)
• On-board connectivity: USB-A & B, Ethernet, RS-232 / RS-485 and external temperature probe
• On-screen prompts
• Automatic performance optimization and specific heat tuning
• Single-point calibration capability

The insulated stainless steel baths are suitable for use up to 200°C. All models have a bridge-mounted immersion circulator. With a pump adapter, this combination can also be used with externally closed and externally open (with option level control) applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.

Hinged lids protect against contamination and loss of liquid through evaporation.

Bath system with Advanced Digital (AD) temperature controller. Controller bridge rests securely on the bath tank, but can be easily removed for cleaning. The generous bath opening provides direct access to the samples.

• Intuitive 3.75" display with touch-pad control
• Large 180° rotatable Swivel 180™ display
• Pressure/suction pump with variable speed and external circulation capability in open and closed control loops
• USB, Ethernet, RS-232/RS-485 interface
• Connection for external Pt100 temperature sensor
• 4 languages selectable
• Automatic performance optimization and specific heat tuning
• Single-point calibration capability
• Class I (NFL) acc. to DIN 12876-1

An economical alternative to integrated heating baths for liquid temperatures up to 150°C. Controller bridge rests securely on the bath, yet is easily removed for tank cleaning. Generous bath opening provides ready access to samples and the included bath cover improves stability.

• Working temperatures from ambient +10° up to 150°C
• Advanced Programmable, Advanced Digital or MX Temperature Controller
• 6, 10, 20 or 28 liter reservoir
• DuraTop™ Chemical Resistant Bridge, Swivel 180™ Rotating Controller (on Advanced Programmable and Advanced Digital models)
• Lidded opening for optional cooling coil (10, 20 and 28 liter models)
• External circulation capability
• Complies with DIN 12876-1 Class I safety requirements for use with non-flammable liquids
• Incl. bath cover

Badsystem mit MX-Temperaturregler. Die Reglerbrücke liegt sicher auf dem Badgefäß auf, lässt sich zur Reinigung aber völlig problemlos entfernen. Die große Badöffnung ermöglicht ungehinderten Zugang zu den Proben.

• 3,25" LCD-Display
• Druckpumpe mit 1 Geschwindigkeit
• Externe Umwälzung: Geschlossener Regelkreis
• 1-Punkt-Kalibrierbarkeit
• Klasse I (NFL) nach DIN 12876-1

The general purpose water baths, Precision, are rugged, high performance baths for temperatures up to 100 °C. Over-temperature safety circuit is designed to prevent thermal runaway. Benefit from outstanding chemical and corrosion resistance with epoxy powder-coated exterior, and easily clean the chamber with its seamless stainless-steel interior. With timer.

• Advanced microprocessor controller is designed for extended functionality
• Protect your work with audible alarms
• Conveniently save commonly used settings with four temperature presets
• Clear polycarbonate gable cover

The general purpose water baths, Precision, are rugged, high performance baths for temperatures up to 100 °C. Over-temperature safety circuit is designed to prevent thermal runaway. Benefit from outstanding chemical and corrosion resistance with epoxy powder-coated exterior, and easily clean the chamber with its seamless stainless-steel interior. With timer.

• Advanced microprocessor controller is designed for extended functionality
• Protect your work with audible alarms
• Conveniently save commonly used settings with four temperature presets
• Clear polycarbonate gable cover

• Internal dimensions (W x D x H) 5 l bath: 300 x 154 x 150 mm
• Internal dimensions (W x D x H) 10 l bath: 330 x 301 x 150 mm
• Heating capacity 5 l: 300 W
• Heating capacity 10 l: 800 W

Flexible in use for all purposes in research and quality control. All PURA™ water baths (except PURA™ 4) have an integrated drain screw. The bright, easy-to-read white LED display is clearly visible, even from a distance. With integrated side recessed grips for easy transport and non-slip rubber feet for safe standing. The complete interior surface of the water baths can be used, as there are no installation elements in the interior.

• Including platform
• Integrated timer
• Bright display with membrane keypad
• Splash-proof
• Built-in dry-running protection

Stainless steel. Choice of 8 variants to accommodate different tube diameters and microtubes. J2-SE and J2-LE are for microcentrifuge tubes.

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.01°C
• Intuitive 3.75" (9.5 cm) display with touch-pad control
• 4 languages: French, German, Spanish, English
• Pump speed variable external temperature control capability
• Pump pressure max. 3.6 psi (0.25 bar)
• On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe
• Adjustable over- or under-temperature
• On-screen prompts
• Safety class III
• Single-point calibration capability

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.005°C
• Time/temperature programming
• Intuitive 4.3" (10.9 cm) SmartTouch display
• 11 languages: French, German, Spanish, Chinese, Arabic, English, Portuguese, Russian, Hindi, Italian, Korean
• Variable speed pump with open- and closed-loop external circulation capability
• Pump pressure max. 3.6 psi (0.25 bar)
• On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, remote on/off and external temperature probe
• Event scheduling (time and date) with real-time clock
• Review temperature trends for up to 10 days
• Multiple selectable "home" screens
• On-screen help
• Automatic and/or user-adjustable performance optimization
• Safety class III
• 10-point calibration capability

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.07°C
• 3.25" LCD Display
• Pressure Pump with one pump speed
• Maximum Pressure: 1.8 psi (0.12 bar)
• External circulation: closed loop
• Safety class I
• Single-point calibration capability

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.04°C
• Large 3.75" universal icon and English display
• Pressure Pump with two speeds
• Pump pressure max. 2.9 psi (0.20 bar)
• On-board connectivity: RS-232 serial output
• Adjustable over- or under-temperature
• Automatic performance optimization
• Safety class I
• Single-point calibration capability

Stainless steel with perforated mesh shelf. Used to alter the effective depth of the bath. Each shelf occupies half the area of the bath specified and so allows both deep and shallow vessels to be accommodated. Dual bath shelf covers half area of the dual 12 tank.

Test tube racks made of PP. In combination with the separately available base tray, suitable for tempering test tubes in shaking water baths.