Shaking water baths

LABSOLUTE® powder funnels made of transparent PP are unbreakable and very economic. They can be autoclaved at 121 °C. The funnels are suitable to transfer powders, granulated materials and highly viscous liquids. The parallel stem prevents blockage in the funnel. There are also ribs on the inside for fast filtration and ribs on the outside to prevent air blockage.

LABSOLUTE® short-stem funnels are made of high-quality borosilicate glass 3.3. They can also be used to decant and filter hot liquids. LABSOLUTE® funnels with diameter from 35 - 150 mm fit to almost every application. All funnels are manufactured on the basis of ISO 4798.

LABSOLUTE® funnels made of transparent PP are autoclavable at 121 °C. Compared to glass funnels, the shatterproof PP funnels are a good and cheap alternative for almost every filtration of low-viscosity liquids. Standard filter paper fits into the funnels. Ribs on the inside ensure fast filtration. Ribs on the outside avoid air bubbles between the filter paper and the funnel's surface.

LABSOLUTE® funnel holders made of PP are suitable for funnels with a diameter from 25 up to 150 mm. Without adapter they can be used for powder funnels with stem diameters not exceeding 35 mm. A clamp adapter is provided for use with rods from 8 to 12 mm.

Clear, virgin polypropylene, autoclavable at 121°C and 1.1 bar for 30 minutes.
The external ribs prevent airlock and back pressure. The internal helicoidal rib prevents filter papers from sticking and increases filtration speed.

Manufactured from best quality polypropylene. Suitable to hold all types of laboratory funnels with diameters up to 150mm. Two tapered wedges are provided to ensure firm grip on rods having diameters of 10-13mm.

These funnel holders are suitable to hold all types of funnels with a diameter up to 150mm. They can also accommodate separating funnels (up to 1000ml). With or without bosshead.

With short stem. With a cone angle of 60° offers an optimum fit for all filter sizes. Ideal for easy filling of laboratory bottles and filtration of liquids. High temperature and chemical resistance.

Made of transparent polypropylene. Ideal for easy filling of laboratory bottles and filtration of liquids.

• Good temperature and chemical resistance
• Autoclavable at 121 °C and 1.1 bar for 30 minutes

DIN ISO 4798. With short stem. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

With short, wide stem.

For rapid filtration. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.

Transparent. Rapid flow due to a steep 60° angle. Practical handle for hanging. Suitable for filling large amounts of liquids. Food-safe products according to regulation (EU) No. 10/2011.

Sieve for 9251 640 and 9251 645 available (not approved as a food-safe article). Please order separately.

Transparent. Rapid flow due to a steep 60° angle. Practical handle for hanging. Suitable for filling large amounts of liquids.

To DIN 12905.

Dispensing funnel for powdered substances. With cone NS 29/32, NS 29/32 socket, NS 14,5/23 side socket.

Supplied flat-pack to minimize storage space and keep it clean. A more environmentally friendly paper product that will naturally biodegrade in the standard waste stream. Fits a wide variety of openings and can be used with virtually any liquid or powder. Cut the stem to any size or shape to meet with your needs.

Cylindrical shape. With interchangeable PE stopper and stopcock with key as indicated, incl. retaining device.
Graduated for reading the approx. volume.
Two types are available:

• With solid glass key stopcock
• With PTFE key stopcock

PP holder mounted on a stand with 12.7 x 595 mm aluminium rod and heavy cast base plate.
Choice of stands to hold 2 or 4 funnels with a top diameter of 50 to 120 mm. The holder height is adjustable.

This filter funnel, which is designed for normal and low pressure, is made of PTFE and PFA, making it resistant to almost all chemicals. It does not leave any trace elements in the medium to be filtered. The vacuum connection is a multi-stepped tubing ferrule with sealing screw, adjustable to suit the most common vacuum tubing bores (6 and 8 mm). The NS 29/32 socket provides a perfectly tight seal onto a similarly socketed, round-bottom flask made of PTFE, PFA or glass (please note vacuum compatibility). Supplied without membrane filter. Suitable for 47 mm diameter membranes, filter area 13.8 cm², sample funnel volume: 125 ml.

With filling vent and handle.

Adjustable height 140 to 230 mm. Inner diameter upper ring: 45 mm. Outer diameter bottom ring: 126 mm.

Single or double holder for funnels from 25mm (with adapter supplied) up to 170mm diameter. Without adapter they can be used for powder funnels with stem diameters not exceeding 35mm. Two clamp adapters are provided for use with rods from 8mm to 14mm.

White, unbreakable, chemically resistant.
For 2 or 4 funnels. Robust, heavy base provides good stability. Variable height adjustment up to 450 mm. Thanks to a magnet system, no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand.

With 2 or 4 aperture reduction inserts for small funnels. Suitable for funnels with diam. 40 to 180 mm.