Cultivation

The cell culture flasks from LABSOLUTE® are made exclusively of PS, corresponding to the highest international standards (USP Class VI). A short, wide and angled neck allows an easy handling while the risk of contamination is minimized. The treatment of surfaces allows adherent cells a uniform and even cell adhesion.

• Short and wide sloping neck for easy access
• Easily stackable
• Both flasks sides have engraved graduation with a labelling area
• Screw cap with a hydrophobic 0.22 μm filter for ventilation
• Packed upright in resealable bags
• Surface is treated with vacuum gas plasma
• Sterilized by radiation (SAL 10^-6)

Accessories Cell scrapers and cell lifters, sterile Alternative Cell culture dishes, treated, sterile, PS Alternative Cell culture multiwell plates, treated, sterile, PS

The LABSOLUTE® filtration units are ideal for filtration of buffer solutions, cell culture media, microbiological media and other biological fluids. The PES membrane guarantees good flow through times and low protein binding.

• High traceability thanks to expiry date and Lot. no. on each filter
• 0.2 μm: Ideal for sterilization applications
• 0.45 μm: Ideal for clarifying buffer solutions and nutrient media preparation
• Filtrate bottle with lid for convenient storage of the filtered solution
• Individually packaged
• Different volumes available
• Pyrogen free and not cytotoxic
• Quick connection for hoses with an inside diameter of 8 to 12 mm
• Gamma sterilized (SAL 10^-6)

The complete filtration unit consists of a filter funnel with vacuum connection and lid, the filtrate bottle and the associated screw cap.

Accessories Filter funnel, sterile, PES Accessories Filtrate bottle, sterile, PS

The LABSOLUTE® cell strainers are made of a strong nylon mesh and are characterized by an even distribution of the mesh pores. With the sterile cell sieves, cell suspensions can be quickly and easily filtered to collect primary cells or prepare samples for flow cytometry.

• Available in three mesh sizes: 40, 70 and 100 μm
• Color coded for easy distinction
• Extended edge allows easy handling even with tweezers
• Designed to fit standard 50 ml centrifuge tubes
• DNase, RNase and pyrogen-free
• Individually packed, gamma-irradiated (SAL 10^-6)

Accessories Centrifuge tubes, PP

The LABSOLUTE® cell scrapers and lifters enable easy and efficient cell harvest. Optimize your cell harvest by using the cell scraper for cell culture flasks and cell lifter for dishes. The handle is made of ABS and allows the controlled use of the thin, flexible blade made of TPE.

• Scraper in two different handle lengths (25 cm with 2 cm blade and 39 cm with 3 cm blade)
• Two blade positions: scraper and lifter
• Individually wrapped in paper/plastic blister packs

Accessories Cell culture dishes, treated, sterile, PS Accessories Cell culture flasks, treated, sterile, PS Accessories Cell culture multiwell plates, treated, sterile, PS

The LABSOLUTE® multiwell tissue culture plates are suitable for handling multiple samples in a single experiment. From 4-well up to 96-well plates, we offer you the appropriate multiwell plate for every experiment. Numbered wells and a rounded corner in the cover reduce misplacement and facilitate identification. The treatment of surfaces allows adherent cells a uniform and even cell adhesion.

• Evaporation is reduced by condensation rings
• Easily stackable
• Individually wrapped in paper/plastic blister pack
• Surface is treated with vacuum gas plasma
• Sterilized by radiation (SAL 10^-6)

Accessories Cell scrapers and cell lifters, sterile Alternative Cell culture dishes, treated, sterile, PS Alternative Cell culture flasks, treated, sterile, PS

The LABSOLUTE® filtration units are ideal for filtration of buffer solutions, cell culture media, microbiological media and other biological fluids. The PES membrane guarantees good flow through times and low protein binding.

• High traceability thanks to expiry date and Lot. no. on each filter
• 0.2 μm: Ideal for sterilization applications
• 0.45 μm: Ideal for clarifying buffer solutions and nutrient media preparation
• Filtrate bottle with lid for convenient storage of the filtered solution
• Individually packaged
• Different volumes available
• Pyrogen free and not cytotoxic
• Quick connection for hoses with an inside diameter of 8 to 12 mm
• Gamma sterilized (SAL 10^-6)

The filter funnels from LABSOLUTE® can be easily screwed onto all standard bottles with a 45 mm thread. The membrane type and pore size are imprinted for easy identification.

Accessories Filtration units, sterile, PES Accessories Filtrate bottle, sterile, PS

The LABSOLUTE® filtration units are ideal for filtration of buffer solutions, cell culture media, microbiological media and other biological fluids. The PES membrane guarantees good flow through times and low protein binding.

• High traceability thanks to expiry date and Lot. no. on each filter
• 0.2 μm: Ideal for sterilization applications
• 0.45 μm: Ideal for clarifying buffer solutions and nutrient media preparation
• Filtrate bottle with lid for convenient storage of the filtered solution
• Individually packaged
• Different volumes available
• Pyrogen free and not cytotoxic
• Quick connection for hoses with an inside diameter of 8 to 12 mm
• Gamma sterilized (SAL 10^-6)

LABSOLUTE® filtrate bottle with ergonomic design for storing sterile solutions made of PS with a PE cap.

Accessories Filtration units, sterile, PES Accessories Filter funnel, sterile, PES

Cell strainers are especially suited for the generation of homogenous single cell suspensions from tissue or primary cell lysates

• Available in 3 mesh sizes, 40 µm: 70 µm, and 100 µm
• Colour coded mesh size
• Designed to fit into 50 ml tubes
• Individually packaged
• Handle and mantle surface for improved aseptic handling
• Nylon mesh
• Pyrogen-free

PC bottle with leakproof PP screw cap. With moulded graduations and pouring rim. Ideal for storing aqueous solutions and for the short-term storage of cell culture media. Autoclavable.

Cell culture flasks with Nunclon™Δ. Surface modifications are certified pyrogen-free and tested for monolayer formation and cloning efficiency with primary and immortalized cell lines. Sterile. Bottleneck at an angle. Sterile.
Material flasks: Polystyrene
Material caps: HDPE

Accessories Cell Scrapers, sterile Accessories Caps for Cell Culture Flasks EasYFlask™, HDPE

In the case of concentration determinations in microplates, the measurement is made vertically and the layer thickness of the sample to be measured is dependent on the sample volume. Even with smaller sample volumes, the resulting layer thicknesses are sufficient for precise measurement. At a constant sample volume, concentrations can be determined with the aid of a calibration curve.

Properties:

• Optical window down to 230 nm ideal for nucleic acid determinations at 260 nm/280 nm
• For measurements of protein concentration at 280 nm
• Transmission measurements with UV light up to 230 nm
• DMSO-resistant
• Stored at -20 °C without any problem

These standard surface treated cell culture plates for the cultivation of adherent cells exhibit a reduced evaporation due to raised well rims and uniform rings on the lids.

• Available with 4-, 6-, 12-, 24-, 48-, 96- or 384-wells (lid included)
• Flat well bottom
• 96-well plate also available as round bottom plate (6.267 171)
• Single position lid reduces the risks of cross-contaminations
• Wells are labeled with alphanumeric code for easy identification
• Sterilized by gamma irradiation
• Pyrogen-free
• Material: Polystyrene

Chamber slides eliminate the need for cell transfer prior to visualisation / staining. Upper structure can be removed when culturing is complete. Useful for viral and mycoplasma testing, chromosome studies, toxicity tests and immunocytology. Sterile. The chemically coated growth surface of the Lab-Tek™II-CC² Chamber Slide System mimics polylysine and provides binding sites optimal for fastidious cells (e.g. neurons).
Material chamber: Polystyrene

Lab-Tek™: Sealant: Non-toxic medical grade silicone.
Lab-Tek II™: Sealant, biocompatible acrylic adhesive.
Lab-Tek II - CC²: modified glass slide, chemically coated to mimic polylysine.

For cell culture, Greiner Bio-One offers standard and filter cap cell culture flasks with growth areas of four different sizes. Suspension culture flasks complete the range in another sizes.They are made of high-grade polystyrene. The special design of our cell culture flasks makes it possible to efficiently reach the cell lawn with a cell scraper, whilst still providing optimal access with a pipette. The special neck
design reduces the risk of wetting the inside of the cap with medium, thus providing additional protection against contamination. The stacking rim on the top of the flasks ensures firm standing and easy stackability in the incubator.

Properties:

• Improved cell adhesion through physical surface treatment
• Cell culture flasks with filter screw cap
• Canted neck
• Graduation on both sides
• Sterile and user-friendly packaging
• 25 cm², 75 cm² and 175 cm² growth areas
• High and flat design of the 175 cm² cell culture flask for variability of media volume

ThinCert™ Cell Culture Inserts for advanced cell and tissue culture applications. They are compatible with standard CELLSTAR® multiwell plates. The coupling between the housing and the membrane is achieved using an automated process which produces an extremely strong and robust seal without compromising or weakening the membrane in any way. The membranes undergo a physical surface treatment to optimise cellular adherence and growth characteristics. Due to a high chemical resistance to solvents a broad spectrum of cell fixation protocols can be performed. The specific hanging geometry design of the ThinCertTM cell culture inserts ensures that there is always a gap between the membrane support and the bottom of the well.

Proporties:

• Stable clear polystyrene housing, USP class VI certified and cell culture compatible
• Hanging geometry
• Sealed PET capillary pore membrane
• Single, sterile blister packing
• Improved cell adhesion through physical surface treatment
• Simplified pipetting due to self-lift geometry
• Enhanced pipetting access and gas exchange

Nunclon™Δ cell culture flasks with surface areas from 25 to 175cm² are available with filter caps or Vent/Close caps for good gas exchange. Short, wide neck (angled or straight) allows easy access to entire growth surface. The Nunclon™Δ treatment is limited to the intended growth area. Neck areas are not treated to prevent cell attachment and growth in undesired areas. Certified pyrogen-free and tested for both monolayer formation and cloning efficiency employing primary cells as well as repeating cell lines. Sterile.
Material flasks: Polystyrene
Material caps: HDPE

Accessories Caps for bottles Nunclon™Δ, HDPE Accessories Cell Scrapers, sterile Alternative Cell Culture Flasks EasYFlask™, treated, PS/HDPE, sterile

4- to 48-well multidishes with Nunclon™Δ treated surface. 6-well plates also available with Poly-D-Lysine and Collagen I coating.
Raised well rims lower the risk of cross contamination.
Excellent optical quality. All available surface modifications are certified pyrogen-free and tested for both monolayer
formation and cloning efficiency employing primary cells as well as repeating cell lines. Sterile. With lid
Material dishes and lids: Polystyrene

Clear, white or black plates with excellent optical clarity and flat bottom wells. Nunclon™Δ, MaxiSorp™, PolySorp™, Collagen I, Poly-D-Lysine surface modifications suitable for cell culture assays.
Material plates: Polystyrene
Total volume µl/well: 400

Minimize plate evaporation through the uniquely engineered design of Thermo Scientific™ Nunc™ Edge-96 Well Plate. The edge plate is engineered for optical superiority allowing your automated imaging systems to operate efficiently. The plates are made of clear polystyrene for excellent optical properties making it ideal for optical measurements
Features:

• Reduced Edge Effect virtually eliminates evaporation in lengthy incubations
• Overall plate evaporation rate reduced to <2% after seven days of incubation
• Low evaporation permits full-plate results
• Large evaporative buffer zones eliminate well-to-well variability
• Perimeter moat can be filled with 1.7mL sterile H2O or media
• Low background fluorescence, ideal for optical instruments
• Ideal for image-based high content applications like measuring primary neuron cultures
• Customized bar coding available (upon request)
• Untreated or cell culture treated hydrophilic surface (Nunclon™ Δ)

Material: Polysytrene
Total well volume: 400µL

Optimizing spheroid formation

• Allows cells to grow in suspension with virtually no cell attachment
• Supports many different cell types and their ability to generate spheroids
• Enables consistent, repeatable cell growth

Growing 3D cancer cultures

• Minimizes variability and supports the consistent formation of cancer spheroids that simulate the 3D structures of tumor growth, providing a better model system for studying tumor cell progression and efficacy of anticancer agents in vitro

Promoting formation of embryoid bodies (EB)

• Demonstrates superior quality for embryoid body formation of pluripotent stem cells with minimal spontaneous differentiation
• Resultant cells are able to differentiate into all three germ layers

Certifications/Compliance

• Free of animal products
• Pyrogen-free: Endotoxin tested (0.5 EU/mL)
• Biologically inert: USP biological reactivity class VI
• High level of sterility: SAL 10-6, ethylene oxide gas sterilization
• Shelf Life 4 years

With blue vented closure, the chance for cross contamination is reduced. Ideal for shaker and suspension cell culture, media preparation or storage. Made of light, crystal clear PETG. Molded-in graduations. Leak-proof HDPE closure has a hydrophobic 0.2µm PTFE membrane that allows sterile air exchange. Flasks offer a 5-year shelf life, a 10^-6 SAL, are non-pyrogenic and non-cytotoxic. Available with flat or baffled bottom. Individually packaged for easy storage and handling.

• Nunclon™Δ surface for cell culture
• Non-treated plates are optimised for scintillation counting
• White or black upper structure with polymer bottom plates combine the optical clarity of virgin crystalline polystyrene with optimal surface for a wide range of HTS applications
• Working volume range: 50 - 200µl/well

Accessories Sealing Tapes for MultiWell Plates

With TPE gasket and port caps, Nalgene 50 platinum-cured silicone tubing. All plastic screw closures for sterile liquid transfer of tissue media, biological reagents, pure water and chemicals to and from Nalgene-carboys. For applications such as bio-reactors and fermenters. Suitable for all large Nalgene carboys or bottles with screw closures of 53mm (53B) or 83mm (83B). Includes two Nalgene 550 platinum-cured silicone tubing for drop tube and splash guard. Can be used with Nalgene carboy bottles with properly set up peristaltic pumps. Autoclavable.

These cell culture flasks with treated surfaces for the cultivation of adherent cells are available with different growth areas from 12.5 to 300 cm². Available with vented or plug-seal caps made from polyethylene. Vented caps contain a 0.22 µm hydrophobic filter to allow gas exchange and minimize risk of cross-contamination. Plug-seal caps can be used in closed systems, providing a liquid and gas sheer seal, but by simply unscrewing the cap one quarter of a turn, this cap can also be used in an open system.

• Innovative angled neck design offers good pipette and cell scraper access
• Upper triangular and wider base shape provides stability
• Stackable
• Special writing area near the neck
• Engraved graduation on both flask sides
• Sterilized by gamma irradiation
• Pyrogen-free
• Individually packed in resealable outer packaging with zip fastener

Material: Polystyrene

Available in two different lengths with adjustable blade for optimal application flexibility. Pyrogen-free. Sterile.

The optimised design of the scraper blade features a pivot angle of 60° that facilitates uniform contact with the growth surface, minimal mechanical strain and efficient cell harvest, even from poorly accessible surfaces. The scraper design also minimises any
accumulation of cell suspension to the blade structure. The handle length has been adapted for use.

Proporties:

• For gentle mechanical removal of adherent cells
• Optimised blade design for maximum cell harvest
• Blade length: 1.8 cm
• Minimal mechanical strain
• 28 cm and 40 cm handhold length
• Pivot angle 60°
• Sterile individual packaging

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. Cell culture microplates from the CELLSTAR® range are specifically treated. This treatment leads to polar groups such as carboxyl and hydroxyl groups , added to the plastic surface. These allow the growth of adherent cell lines. They are also suitable for automated systems and contain an alphanumeric well coding. They are also suitable for footprint systems and contain an alphanumeric well coding.

Properties:

• High clarity enables optimal microscopic examinations
• Lid enables optimal gas exchange with the lowest possible evaporation
• Stackable
• Alphanumeric well coding
• Individually wrapped peel-off bags
• Consecutive lot numbering
• 384 and 1536 well foramt available

With white HDPE screw closure. Reduced permeability to CO₂/O₂ which reduces pH-shift. Bottles and closures are radiation-sterilised and pyrogen-free to eliminate costly washing, depyrogenation and autoclaving steps. Heatshrink band around closure and neck provides tamper-evident seal. Packed in shrink-wrapped trays. 2L size has molded-in handgrips and a 53-mm (53B) white closure. Bottles are sterile to 10-6 SAL, non-pyrogenic, non-cytotoxic and comply with USP Class VI guidelines. Sterile. Transparent. Leakproof. Graduated.

Inserts are treated and tested for good cell attachment. Available in different formats for 6, 12 or 24 well multidishes and in different pore sizes: 0.4, 3 or 8 µm. Easy cultivation of most cell types without matrix coating possible. Used in a variety of applications, including transport studies, toxicity tests, chemotaxis studies and electron microscopy. Packed in sterile Nunclon™Δ treated multidishes and resealable bags.
Non-toxic. Pyrogen-free. Sterile.
Material membrane: Polycarbonate

A time and space saving vessel for large scale cell culture production. Suitable for industrial scale production of vaccines, monoclonal antibodies or pharmaceuticals. Nunclon™Δ surface modification is certified for cell culture and ensures consistent cell growth layer to layer, lot to lot. Ready to use and easy to fill and empty with plug and play connection. Wide range of accessories available for different methods of filling, venting and harvesting (please see Cell Factories Accessories). Sterile.
Material cell factories: Polystyrene

Accessories EasyFill™ Cell Factory System Accessories, HDPE

Non-treated, sterile multidishes for suspension cell cultures are available in formats from 4 up to 48 wells. Raised well rims lower the risk of cross contamination. Excellent optical quality. Pyrogen-free. With lid.
Material dishes and lids: Polystyrene

The surface of the tubes is coated with Thermo Scientific™ Nunclon™ Δ and designed for the cultivation of adherent cell cultures. With cap made of PE.

• Tubes with flat side provide 5.5 cm²culture surface
• Suitable for microscopy, use of cover glasses possible
• Leakproof

All plates consist of an optically clear borosilicate glass bottom. The glass bottom allows transmission measurements in the wavelength range above 350 nm. The 175 μm thick glass bottom of the SensoPlate™ is equivalent to the light path of standard coverslips. A adhesive is used for the fixing glass bottom plates to enable a minimal autofluorescence.

Properties:

• For the fluorescence correlation spectroscopy
• A light path of 175 +/- 15 μm
• available sterile with lid
• The footprint of all glass bottom microplates is conform to the ANSI 1-2004 standard

Combining a white or black upper structure with an optically clear, flat well bottom polymer base allows for reading from bottom and top, or both. Nunclon™Δ surface modifications are for cell culture optimized. Non-treated plates are ideal for scintillation counting.
Material plates: Polystyrene
Total volume µl/well: 120

Radiation-sterilised. Working volume 10 to 100µl / well. Developed for large-scale DNA library manipulations. The standard microwell plate format of 128mm x 86 mm permits automation. C-shaped well bases provide good optical properties and good sample recovery. Space-saving. Replication system available. Compatible with robots. Also available in cell culture, as well as Collagen I, poly-D-lysin, MaxiSorp, Polysorp, Immulon 4HBX and non-binding qualities in white, black and transparent.

Material plates: Polystyrene
Total volume µl/well: 120

Alternative 96 Well Polystyrene Microplates, PS

Microtiter plates for immunoassays with surfaces for affinity binding (passive streptavidin and immobilizer streptavidin, nickel chelate and glutathione, BioBind).

• Streptavidin-biotin interaction for a broad range of biomolecules
• Highly specific binding surface
• Improvement of the signal-to-noise ratio
• 96 well plate: Working volume 100 µl/well, total volume 350-400 µl/well
• 384 well plate: Working volume 50 µl/well, total volume 120 µl/well

96 Well Polystyrene Microplates are manufactured under DIN ISO 9001 guidelines and can be traced all the way back to production through a defined LOT number system. Furthermore they are footprint compatible with automated systems. Polystyrene is a highly clear polymer with excellent optical properties which makes it ideal for precise optical measurements. An it is suitable for work with cell cultures.

Properties:

• F-Bottom / Chimney Well: chimney-like arrangement wells, each well stands on its own
• FLUOTRAC™ are black microplates for fluorescence measurements
• LUMITRAC™ are white microplates for luminescence measurements
• medium binding microplate is more hydrophobic than the surface of a high binding microplate
• Are analysed for detectable DNase, RNase and human DNA
• Are free of biocides and antistatics
• Are manufactured without the use of siliconbased mould release

Further spare parts on request.

The DURAN^® TILT Light Shield is a removable white silicone sleeve that covers 94% of the bottle surface. The sleeve blocks damaging ultraviolet light, protects the glass surface from damage, and facilitates safer handling.

The DURAN^® GL 56 Bottle Tags can be used for individual colour coding or for fixing the light shield to the bottle.

DURAN^® bottle top vacuum filtration units for use with the TILT bottle (using an adaptor) or 45 mm media bottles. Manufactured in a Class 100,000 Cleanroom from Class VI non-cytotoxic materials. Supplied sterile.

Re-usable DURAN^® GL 56 filter adaptor allows the use of the TILT bottle with standard 45 mm bottle top filtration units. Manufactured from inert PTFE.

DURAN^® TILT GL 56 self-adhesive cap labels can be used to clearly indicate the separate bottles of media for each cell line, or types of media.

In vivo similar morphology for demanding and sensitive cells. Due to the improved adherence and homogeneous cell growth an increased cell yield can be expected. The Advanced TC™ Filter Top cell culture flask allow the use of serum-reduced and serum-free media.

Features & Benefits:

• Storage at room temperature
• Suitable for automation
• Free from detectable DNase, RNase and human DNA
• Free from detecable endotoxins
• Free from cytotoxic substances

New line of membrane driven flasks for high density cell culture. The flasks are designed to enhance small scale bio-production for antibodies and proteins. Conventional in vivo or in vitro cell culture methods can be laborious, may have low cell density and require significant purification. CELLine™ flasks address these three areas of limitation observed in static tissue culture flasks.

• Disposable and ready-to-use
• High cell density and high product concentration
• Reduces operation time
• Decreases use of consumables
• Cost-efficient, space saving, and stackable
• No additional equipment required for operation

For manual and automated cell and tissue culture work.
Includes two different cell culture plates and two types of cell culture inserts, which can also be used in combination.

Quality features
General

• Sterile according to ISO 11 137 and AAMI-Guidlines, SAL 10^-6
• Non cytotoxic according to ISO 10 993 5, endotoxin free (<0.01 EU/ml), free from DNA, DNase and RNase.

Plates

• Innovative, specially designed wells with side feeding ports,
• Manufactured according to the requirements in ANSI/SLAS Standards 1 and 4
• pureGrade™ S (untreated) and cellGrade™ plus (TC treated) surface

Inserts

• Track-etched PC- und PET membranes
• Hanging inserts
• Perfect positioning in the plates via guide ridges
• cellGrade™ plus surface (TC treated)

BRANDplates^® plates
Cell culture plates for insert strips

24-well Standard Plate
The plate includes 24 individually fillable wells that can be fitted with strips of 4 inserts and/or individual inserts.
6-well Special Plate
The 4 wells are all connected as one large, elongated well. This well can be fitted with a strip of 4 inserts so that all 4 of the inserts in the strip can be supplied with medium at the same time.

BRANDplates^® Insert Strips and Insert System
Cell culture inserts, smooth walled

Cell culture inserts with Inlet Opening System
With special inlet channels, for automated in vitro preparation of human tissues. The Inlet Opening System enables rapid, consistent changing of media, from submersion culture to air-lift culture. The special inlet channels enable adjustment of the medium level without damage to the skin mode
PS. pureGrade™ S or cellGrade™ plus surface, sterile. In each case with lid with condensation rings.
Packaging: single packed, with lid

For manual and automated cell and tissue culture work.
Includes two different cell culture plates and two types of cell culture inserts, which can also be used in combination.

Quality features
General

• Sterile according to ISO 11 137 and AAMI-Guidlines, SAL 10^-6
• Non cytotoxic according to ISO 10 993 5, endotoxin free (<0.01 EU/ml), free from DNA, DNase and RNase.

Plates

• Innovative, specially designed wells with side feeding ports,
• Manufactured according to the requirements in ANSI/SLAS Standards 1 and 4
• pureGrade™ S (untreated) and cellGrade™ plus (TC treated) surface

Inserts

• Track-etched PC- und PET membranes
• Hanging inserts
• Perfect positioning in the plates via guide ridges
• cellGrade™ plus surface (TC treated)

BRANDplates^® plates
Cell culture plates for insert strips

24-well Standard Plate
The plate includes 24 individually fillable wells that can be fitted with strips of 4 inserts and/or individual inserts.
6-well Special Plate
The 4 wells are all connected as one large, elongated well. This well can be fitted with a strip of 4 inserts so that all 4 of the inserts in the strip can be supplied with medium at the same time.

BRANDplates^® Insert Strips and Insert System
Cell culture inserts, smooth walled

Cell culture inserts with Inlet Opening System
With special inlet channels, for automated in vitro preparation of human tissues. The Inlet Opening System enables rapid, consistent changing of media, from submersion culture to air-lift culture. The special inlet channels enable adjustment of the medium level without damage to the skin mode
PS. cellGrade™ plus surface, sterile. Strips of 4 inserts, divisible (single packed).

UpCell™ Surface enables harvesting of adherent cells by simple reduction of temperature from 37 °C to below 32 °C.

• Without trypsinization you will get your cells with intact surface proteins for culture passaging, single- cell analyses and cell transplantation reasearch.
• No manual cell scraping to get high viability.
• Enables harvesting of cell sheets and creation of 3D- tissue models held together by normal cell junctions and extracellular matrix deposited by the cells.
• Available in sterile MicroWell™ Plate, Petridish or MultiDish format.
• With lids with airvent rims.
• Certified for functionality, sterility, pyrogen-free and non- toxicity.

6- Well- Multidish and 3.5cm- Dish will be delivered with specific membrane for cell sheet transfer.

Non-treated, sterile flasks for suspension cell cultures. White caps for easy identification. Pyrogen-free.
Material flasks: Polystyrene
Material caps: HDPE

Accessories Cell Scrapers, sterile