Water jet pumps

With constant ultimate vacuum, high suction flow rate and very low water consumption. Can be connected to mains water system in a number of different ways using the adapter supplied and reducing adapters that are available as accessories. For continuous use at temperatures up to 80°C max. High chemical resistance as the media being pumped only comes into contact with PP, FKM and PTFE. Integral non-return valve increases safety.
Comprises: Water jet pump, including:
Mains water connections: R ¾" sleeve nut, R ½" reducing adapter and flexible tubing connection (nozzle) with external diameter from 10mm to 12mm.
Vacuum connection: Detachable nozzle with external diameter from 6mm to 9mm and GL 14 screw cap.

This pump will work on pressures up to 10 kg/cm². With built-in, non-return valve to eliminate back flow. Useful for vacuum removal of spilt chemicals, as well as for filter work. Easily dismantled for cleaning.

Nickel-plated brass, non-return valve, with connection for quick coupling.

Nickel-plated brass, non-return valve, with female connection to water tap.

Non-return valve, standard design, no removable parts, material: borosilicate glass 3.3

With spiral ejector for high suction capacity, speciications (at 4 bar water pressure): water consumption: 10 l/min, low rate: 400 ml/s, non-return safety: up to 1 kg/cm³, ultimate pressure: 16 mbar, material: borosilicate glass 3.3

Matt chrome-plated brass and plastic.
For low pressure.
Can be completely disassembled. Each pump is supplied with an intermediate adapter, which acts as a rapid coupling between the suction tubing and pump. Adapter fits tubing internal diameters between 8 and 13 mm. A short length of tubing can be attached to the discharge nozzle.