Diaphragm pumps

Heavy-walled and flexible.

The diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.
One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.
Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.
In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).
An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.

Gas ballast for reliable pump performance.
Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.

Accessories Accessories for ME 1, ME 1C and MZ 1C Accessories Pumps, vacuum / pressure, diaphragm, Vacuubrand, accessories Accessories Vacuum fittings, rubber tubing

• Application: Fluid aspiration, Degassing, Gel drying, Rotary evaporation, Centrifugal concentration, Distillation
• Flow rate up to 2.04 m³/h / Ultimate vacuum up to 8 mbar abs.
• High level of vapor and condensate compatibility
• PTFE pump head combined with PTFE-coated diaphragm are ideal for extremely aggressive/corrosive gases and vapors
• N 820.3 FT.18 and N 840.3 FT.18: ATEX-compliant in accordance with ATEX II 2/-G IIB+H2 T3 Gb internal atmosphere only

Specifications
Operating pressure:	1 bar
Connectors for tube:	ID10 mm
Permissible media and ambient temperature:	5 to 40 °C
Pump head:	PTFE
Diaphragm:	PTFE-coated
Valves:	FFPM

Accessories Accessories for Diaphragm vacuum pumps and pump systems LABOPORT® / LABOBASE® Accessories  Alternative Diaphragm vacuum pumps LABOPORT® SD, chemically-resistant

The diaphragm pumps ME 1 offer a compact and high performance solution. With their easy-to-use functionality, they are a perfect partner for both single and multiple filtrations.
One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.
Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.
Typical applications for the ME 1 are aqueous filtrations. The PTFE diaphragm and valves are rugged and provide high chemical resistance. If aluminium has the required specific resistance, solvent-containing samples can also be filtrated.

Accessories Accessories for ME 1, ME 1C and MZ 1C Accessories Pumps, vacuum / pressure, diaphragm, Vacuubrand, accessories Accessories Vacuum fittings, rubber tubing Alternative Diaphragm pumps, Aluminium

Vacuum regulator valve for ME 1, ME 1C and MZ 1C with manual vacuum control using air bleed. The manometer can be mounted and pivoted in several orientations for optimal visibility. High chemical compatibility (especially with the vacuum regulator valve for ME 1C)

Premium module: The premium module comprises the inert gas inlet (only sizes 49/101), extra connectors for thermoshelves, one for VO29, two for VO49/VO101, an additional thermoshelf for model size 49/101.

Vacuum pump module: Without pump with antivibration metal plate at the bottom to accommodate the vacuum pump, including full-sight glass door, socket, signal cable and connecting hose to the vacuum oven.

Chemical-resistant vacuum pump: With 4x diaphragm, pump capacity: approx. 50 Nl/min = 3.0 m/h³, automatic purge control, with signal cable (3 m) to control the rotation speed and vacuum connecting hose (3 m).

• Application: Metering liquids
• Pump heads available in your choice of PP, PVDF or PTFE, diaphragms available in PTFE, valves in FFKM
• Flow rate can either be set manually (Version S) or both manually and via an external control device as well as with interface RC 232 (Version RCP)
• Additional safety diaphragm for maximum security
• Easy exchange of the transfer diaphragm by activating the maintenance command in the operating program

Advantages:

• Intuitive operation, easy calibration
• Adjustable to liquid characteristics
• Self-priming and dry-running
• Spray water protected IP 65
• Small size

Specifications
Pressure:	6 bar
Allowed ambient temperature:	+5 ... +40 °C
Allowed liquid temperature:	+5 ... +80 °C
Dimensions (WxDxH):	93 x 150 x 144 mm
Pump head:	optional PP, PVDF or PTFE
Diaphragm:	PTFE
Valves:	FFKM
Weight:	0,9 kg

Accessories Accessories Chemically-resistant Diaphragm Dosing Pumps SIMDOS® Accessories Accessories Dosing Pumps LIQUIPORT® / SIMDOS® Alternative

• Improved performance, increased pumping speed and lower ultimate vacuum extends applications in both the laboratory and in industrial applications
• Long-life diaphragm with PTFE sandwich construction and unstressed diaphragm support
• Easy service/exchange of diaphragm or valves due to novel integrated valve head assembly. Easy dismantling, cleaning and reassembly without requiring readjustment
• Very quiet and ultra low vibration due to compact drive with patented motor control system. Ideal as a built-in component for sensitive equipment in both the laboratory and in industry
• Superior vapour tolerance due to integral tubing connections and gas ballast valve for continuous purge (for ME 16C NT, MZ 2C NT, MD 4C / 12C NT and MV 10C NT)
• Easy to clean due to smooth exterior surfaces

The VARIO^® design provides vacuum control by precise and continuous adaption of the chemistry diaphragm pumps motor speed, and includes the vacuum pump, as well as the VACUU·SELECT controller.

Diaphragm pump MD 4CRL NT with reduced leakage rate (0.001 mbar x l/s).

Country-specific power cord versions available on request.

Specifications
Vacuum inlet:	10mm tubing nozzle
Pressure outlet:	10mm tubing nozzle

Accessories Sealing kit NT for chemistry diaphragm pumps NT Alternative Diaphragm pumps chemistry design, ME 1C, MZ 1C, MD 1C

Compact design, ready to use, no set-up required. Constructed in chemically resistant materials. Quiet operation.

• 100% oil-free pumping of gases
• gas ballast as standard for working with condensable vapours
• good vacuum even with gas ballast
• high vapour tolerance for water and solvents
• long service life, low maintenance

Features:
2AK: Inlet and outlet separator
AK + EK: Inlet separator, exhaust vapour condenser
PC 510 select (two-stage) / 610 select (three-stage) : with AK + EK; 1 electronically controlled vacuum port
PC 511 select (two-stage) / 611 select (three-stage) : with AK + EK; 1 electronically controlled and 1 manually controlled vacuum port
PC 520 select (two-stage) / 620 select (three-stage) : with AK + EK; 2 electronically controlled vacuum ports

Characteristics and applications:
Without vacuum control:
MZ 2C NT +2AK: e.g. filtration, distillation without condensation at the outlet
MZ 2C NT +AK+EK: Well-proven unit for a wide range of applications for a single-user, e.g. gel drying, distillation, vacuum concentrator. For solvents with medium to low volatility.
MD 1C +AK+EK: Space-saving single-user configuration. For high-boiling-point solvents.
MD 4C NT + AK+EK: Larger or multi-user applications, the local vacuum network VACUU·LAN^®. For high-boiling solvents.
MV 10C NT +EK: Four-stage diaphragm pump with exhaust vapour condenser. For particularly high demands regarding low ultimate vacuum and pumping speed in chemistry laboratories, pilot plant or small production units.

With vacuum controller:
PC 510 select / 511 select: Well-proven units for a wide range of processes in chemistry laboratories, e.g. all common solvents. PC 511 select with addtional manually controlled vacuum port.
PC 610 select / 611 select: Proven solution for supporting electronically controlled evaporation or drying processes even with many high boiling point solvents. PC 611 select with additional manually controlled vacuum port.
PC 520 select / 620 select: Compact solution for simultaneous operation of two electronically controlled vacuum applications with one single pump.

Alternative Chemistry Pumping Units VARIO® select Alternative Chemistry Pumping Unit PC 3001 VARIO® select with condenser Peltronic® Alternative Diaphragm pumps chemistry design, ME 1C, MZ 1C, MD 1C

The two-stage pump is designed for pumping and compressing gases and vapours and generate vacuum e.g. for rotary evaporators, vacuum ovens and vacuum filtration. Their electrical conductivity prevents electrostatic charging and minimizes the risk of the gas mixture igniting inside the pump.

• For tubes with ID = 8 mm
• Chemically resistant
• Resistant to aggressive solvents and acid vapours
• Elastomer diaphragms with PTFE layer
• Pump and connection heads are carbon fibre reinforced
• Integrated motor protection switch
• Vibration isolating feet

Scope of delivery: 2-head chemical diaphragm pump, external power supply and device connection cable with plug (EU, UK).

Specification
Pump speed 50 / 60 Hz:	16.7 / 18.3 l/min
Final vacuum (abs.):	< 8 mbar
Suction / pressure connection:	Hose nozzle DN 8
Noise:	< 44 dB(A)
Motor power:	60 W
Voltage / frequency:	230 V / 50/60 Hz
Dimensions (W x D x H):	225 x 195 x 147 mm
Weight:	6.5 kg
IP code:	IP 54

• Improved performance, increased pumping speed (up to 16 m³/h) and better ultimate vacuum (up to 0.3 mbar). Extend applications with non-aggressive gases whether used in the laboratory or for industrial processes
• Very low leak rate due to enhanced leak-tight tubing connections, resulting in consistent performance characteristics - even after many years of operation. Ideal for analytical applications
• Long diaphragm and valve lifetimes: made of highly flexible FPM, with fabric-reinforced double diaphragms for improved long term stability
• Very quiet and ultra low vibration due to compact drive with patented motor drive system. Ideal as a built-in component for sensitive analytical equipment
• Easy to clean due to smooth surfaces. A robust solution for numerous applications in industrial environments

The VARIO^® design provides vacuum control by precise and continuous adaption of the diaphragm pumps motor speed, and includes the vacuum pump, as well as the VACUU·SELECT controller.

Country-specific power cord versions available on request.

Specifications
Vacuum inlet
Tubing nozzle DN 8-10 mm:	ME 4 NT, ME 4R NT, ME 8 NT, MZ 2 NT, ME 2 NT
KF DN 16:	MZ 2D NT, MD 4 NT, MV 2 NT, MD 4 VARIO select, MD 2 VARIO select
Pressure outlet
Silencer / G1/4":	MZ 2 NT, MZ 2D NT, MD 4 NT, MV 2 NT, ME 2 NT, MD 4 VARIO select, MV 2 VARIO select
Twin silencers / G1/4":	ME 8 NT, ME 4 NT
Tubing nozzle DN 8-10 mm:	ME 4R NT

Accessories Sealing kit NT for chemistry diaphragm pumps NT Alternative Diaphragm pumps, Aluminium PTFE design, ME 1, MD 1

• Application: Degassing, Gel drying, Rotary evaporation, Distillation
• Flow rate 1.26 m³/h / Ultimate vacuum 2 mbar abs.
• High suction speed, particularly in the low vacuum range
• Integrated rotational speed control enables pumping capacity to be easily adapted manually to process requirements
• PPS pump head combined with PTFE-coated diaphragm are ideal for aggressive/corrosive gases and vapors
• Integrated gas ballast valve

Tip: When combined with the VC 900 vacuum control unit and the connection cable, the rotational speed is controlled in accordance with the requirements of the process.

Specifications
Operating pressure:	0.5 bar
Connectors for tube:	ID10 mm
Permissible media and ambient temperature:	5 to 40 °C 10 to 40 °C
Pump head:	PPS
Diaphragm:	PTFE-coated
Valves:	FFPM
Weight:	8.5 kg

Accessories Accessories for Vacuum Pump Systems N 920 Accessories Accessories for Vacuum Pumps LABOPORT® / N 920 G Accessories  Accessories  Accessories  Accessories

• Application: Rotary evaporation, Distillation, Vacuum oven, Centrifugal concentration
• Flow rate up to 2.04 m³/h / Ultimate vacuum 10 mbar abs.
• Integrated KNF self-drying system ensures that condensate is quickly removed from the pump heads without the vacuum being altered. This significantly reduces process time and preserves the pump heads.
• Chemically resistant and thus ideal for use with extremely aggressive/corrosive gases and vapors

Specifications	N 820 // N 840
Operating pressure: Flow rate: Ultimate vacuum:	1 bar 2.04 m³/h 10 mbar
Connectors for tube:	ID10 mm
Permissible ambient temperature:	5 to 40 °C
Pump head:	PTFE
Diaphragm:	PTFE-coated
Valves:	FFPM
Weight:	9.6 kg // 12.9 kg

Accessories Accessories for Diaphragm vacuum pumps and pump systems LABOPORT® / LABOBASE® Accessories  Alternative Diaphragm vacuum pumps LABOPORT®

Accessories Oil for rotary vane pumps

• Application: Transferring liquids
• Self priming, dry running and maintenance free
• Pump heads available in your choice of PP (Typ KT), PVDF (Typ TT) or PTFE (Typ FT), diaphragms available in PTFE, valves in FFKM
• Flow rate can either be set manually (Version S) or both manually and via an external control device (Version RC)

Specifications
Suction head: Pressure head:	3 mWg 10 mWg
Ambient temp.: Liquid temp.:	5 ... 40 °C 5 ... 80 °C
Pump head:	optional PP, PVDF or PTFE
Diaphragm:	PTFE-coated
Valves:	FFKM
Tubing connection:	ID 8 mm
IP code:	IP65

Accessories Accessories for Chemically-resistant Liquid Pumps LIQUIPORT® Accessories Accessories Dosing Pumps LIQUIPORT® / SIMDOS® Alternative

The two-stage pump is designed for pumping and compressing gases and vapours and generate vacuum e.g. for rotary evaporators, vacuum ovens and gel dryers. Their electrical conductivity prevents electrostatic charging and minimizes the risk of the gas mixture igniting inside the pump.

• For tubes with ID = 8 mm
• Chemically resistant
• Resistant to aggressive solvents and acid vapours
• Elastomer diaphragms with PTFE layer
• Pump and connection heads are carbon fibre reinforced
• Integrated motor protection switch
• Vibration isolating feet

Scope of delivery: 2-head chemical diaphragm pump, external power supply and device connection cable with plug (EU, UK).

Specification
Pump speed 50 / 60 Hz:	38.3 / 41.7 l/min
Final vacuum (abs.):	< 8 mbar
Suction / pressure connection:	Hose nozzle DN 8
Noise:	< 44 dB(A)
Motor power:	180 W
Voltage / frequency:	230 V / 50/60 Hz
Dimensions (W x D x H):	265 x 230 x 170 mm
Weight:	11.2 kg
IP code:	IP 54

The laboratory vacuum pump for the filtration of samples in microbiology. During the vacuum filtration, the filtrate is directly discharged to the drain.

• Transmembranous pressure of less than 700 mbar, acc. ISO 8199
• Constant flow rates
• Defined maximum vacuum
• Suitable for gases and liquids

Specifications
Flow rate:	> 4.0 l / min.
Max. vacuum:	0.4 bar
Power supply:	100 … 240 V , 47 … 63 Hz

Sturdy, economical diaphragm pumps with high pressure output. Variable adjustment.

Model Max. flow rate approx.: Max. output approx.: Voltage: Frequency: Power consumption:

MP 300 / MP 500 300 L / hr. / 500 L / hr. 3.1 mWs / 3.3 mWs 220-240 V / 220-240 V 50 Hz / 50 Hz 4 W / 8 W

For safe and comfortable aspiration of liquid supernatants in cell culture. Increases work safety when handling with infectious material. Self-locking fittings close the bottle automatically and seal it hermetically for transport.

• Completely autoclavable
• Breakproof and chemical-resistant safety bottle
• Safety filter between bottle and pump prevents contamination and premature wear
• A commercial Pasteur pipette is used for aspiration (available separately)

Please order optional vacuum pump separately.

Replacement covers and other spare parts on request.

Scope of supply: Safety suction system, safety bottle with screw cap and 2 self- locking fittings, silicone tubing 2 x 1.5 m (autoclavable), safety filter, 2 house couplings for tubing connection, 1 aeration insert

Accessories  Accessories  Accessories  Accessories  Accessories  Alternative QuikSip™ BT-aspirator

Type 6131:
With PVC casing. Vacuum of approx. 86 mbar can be achieved and maintained. With outlet valve with detachable cover and separate vacuum release lever. Available with, or without, pressure gauge (divisions in cm and inches Hg). Tubing connection nozzle fits tubing with an internal diameter of 6.4 mm. Supplied with 60 cm length of clear plastic tubing.

Type 6132:
As type 6131, but additionally with vacuum gauge. Can be disassembled for repair or replacement of internal parts.

ATEX chemistry diaphragm pumps offer all advantages of oil-free chemistry diaphragm pumps. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The ATEX approval includes the interior of the pump (in contact with pumped gases) as well as the surrounding area of the pump.

• Outstanding chemical resistance and superior vapor tolerance
• Mainly made of antistatic materials
• Flame proof motor with integrated, self-locking overload and excess temperature protection for direct 230V / 50Hz single phase power supply
• Overpressure safety relief valves internally and at outlet
• With separate gas ballast connection part for use of inert gas
• Safety diaphragm technology with option for inert gas purge and detection of diaphragm breakage

ATEX compliance:
Pump chamber (pumped gases): II 2G IIC T3 X
Exterior space (pump environment): II 2G IIB T4 X (with inert gas purging) / II 3G IIB T4 X (without inert gas purging)

Speed-controlled ATEX VARIO vacuum pumps on request.

Specifications
MZ 2C EX
Vacuum inlet:	Small flange KF DN 16
Pressure outlet:	Small flange KF DN 16
MV 10C EX / MD 4C EX
Vacuum inlet:	Small flange KF DN 25
Pressure outlet:	Kleinflansch KF DN 16
MZ 2C EX+AK+EK / MD 4C EX+AK+EK
Vacuum inlet:	Small flange KF DN 16
Pressure outlet:	Tubing nozzle DN 8-10 mm
Cooling water connection:	2 x tubing nozzle DN 6-8 mm

For vacuum aspiration of liquids, including tissue culture media, supernatants, and chemical wastes.

• No external vacuum system required
• Built-in, maintenance free pump quickly and conveniently aspirates fluids
• With quick disconnects to allow easy removal, emptying and replacement of the bottle
• Heavy walled collection bottle made of chemical and corrosion-resistant polypropylene
• Pump housing made of polypropylene
• Lid with safety release vent to prevent vacuum implosion
• Replaceable hydrophobic filter protects the pump motor from fluid contamination
• Collection bottle, lid, tubing and connectors are autoclavable at 121°C

Specifications
Volume collection bottle:	3.8 l
Dimensions (W x D x H):	232 x 171 x 438 mm
Power supply:	90 ... 240 V, 50/60 Hz

The Rotary Vane Vacuum Pump RC 6 has been designed to minimise the adverse effects of condensable and corrosive vapours. Its main components are a two-stage rotary-vane pump and a two-stage chemistry diaphragm for optimised corrosion resistance. The diaphragm pump continuously evacuates the oil reservoir of the rotary-vane pump in order to keep the partial pressures of solvent vapours, oxygen and corrosive gases at a low level and/or below their condensation point. The RC 6 is a low-maintenance pump for freeze-drying and other applications requiring an ultimate vacuum in the 10^-3 mbar range.

Scope of supply: Pump, overload circuit breaker and mains cable (2 m), centering and clamping ring for inlet, particulate filter, operating instructions, oil (bottle of 500 ml)

Specifications
Flow rate:	6.9 m3/h
Ultimate vacuum (partial) without gas ballast:	0.0004 mbar
Ultimate vacuum (total) without gas ballast:	0.002 mbar
Ultimate vacuum (total) with gas ballast:	0.01 mbar
Oil capacity (B-Oil):	min. 0.34 l; max. 0.53 l
Inlet connection: Outlet connection:	Small flange NW 16 Hose nozzle NW 8-10mm
Motor rating:	0.3 kW
Nominal speed 50/60Hz:	1500/1800 rpm
Dimensions (L x W x H):	526 x 302 x 226 mm
Weight:	25 kg
IP code:	IP 40

• Gentle drying of heat sensitive materials
• Significantly reduced drying times when compared to convectional oven without vacuum
• Drying of intricately designed parts
• Elimination of oxidation associated with heat treatment
• Targeted recovery of degassed product
• Capacity refers to the trap in ml

Accessories Vacuum oven 6000 Accessories Accessories for vacuum drying oven 6000 Accessories Accessories for vacuum drying cabinets 6000

Measures and displays vacuum pressure both graphically and digitally from 1100 to 1 mbar. Controlling the pressure can be done in real-time. The durable, chemically resistant sensor built into the VCpro 601 vacuum controller is a ceramic thick film hybrid. The sensor reading is gas independent and gives an absolute pressure.

• Precise vacuum control with timed ramp capability
• Fully programmable modes to allow run repeatability
• Intuitive ICON-navigation of control screens
• Connectivity through LAN and RS232
• Built-in function for self-cleaning of diaphragm pump
• Security levels for administrators and users
• Log files on all pump activities for easy traceability
• High-Res display with dark and light screen modes
• Digital and analogue vacuum pressure display
• Automatic destillation control
• Can be used with diaphragm or piston pumps from any manufacturer

Specifications
Vacuum Pressure Control Range:	1 ... 1100 mbar
Pressure Reading Accuracy:	<± 0.3 % of full scale
Control Accuracy:	± 1 mbar
Power Consumption:	40 W
Operating Temperature Range:	15 ... 30 °C
Suction / pressure connection: Inert Gas Port to Release Valve:	DN8 (6,35 mm ID) DN4 (3,2 mm ID)
Dimensions (W x D x H):	195 x 178 x 105 mm
Weight:	1.5 kg
IP code:	IP 20

The compact pumps feature a control knob for manual adjustments of the flow rate, making them well suited to a wide variety of applications, e.g. rotary evaporation, distillation, gel drying, degassing as well as the use with vacuum ovens and vacuum concentrators. Due to the manual rotational speed control, the pumps are quiet, very energy efficient, and can be optimally adjusted in accordance with the application.

• Easy-to-clean surface
• Adjustable in flow rate due to manual rotational speed control
• Combination of PTFE pump head and PTFE-coated diaphragm makes the pump ideal for extremely aggressive/corrosive gases and vapors
• High level of compatibility with vapor and condensation
• Integrated gas ballast valve
• 3-color status display: In operation / Stand-by / Error
• ATEX-compliant in accordance with II 2/-G IIB+H2 T3 internal atmpsphere only
• 100% oil-free transfer to ensure uncontaminated transfer, evacuation and compression
• Optional: Easily expandable with separators and/or condensers

Specifications
Ultimate vacuum (abs.): Operating pressure:	6 mbar 0.1 bar
Connectors for tube:	ID 9/10 mm
Permissible ambient temperature:	5 ... 40 °C
Pump head:	TFM™ PTFE
Diaphragm:	PTFE-beschichtet
Valves:	FFPM

Accessories Accessories for Diaphragm vacuum pumps and pump systems LABOPORT® / LABOBASE® Accessories  Alternative Mini-Diaphragm vacuum pumps LABOPORT® N 96, chemically-resistant Alternative  Alternative  Alternative

The Pump combines a high flow rate with a very compact design. Suitable for filtration, SPE, and liquid aspiration using a vacuum. Due to the manual rotational speed control, the pump is quiet, very energy efficient, and can be optimally adjusted in accordance with the application.

• Easy-to-clean surface
• Very small footprint
• Adjustable in flowrate due to manual rotational speed control
• PTFE-coated diaphragm for use with aggressive/corrosive gases and vapors

Specifications
Ultimate vacuum (abs.): Operating pressure:	130 mbar 2.5 bar
Connectors for tube:	ID 6 mm
Permissible ambient temperature:	5 ... 40 °C
Pump head:	PPS
Diaphragm:	PTFE coated
Valves:	FKM

Accessories Accessories for Diaphragm vacuum pumps and pump systems LABOPORT® / LABOBASE® Accessories  Alternative Diaphragm vacuum pumps LABOPORT® N 820 G / N 840 G, chemically-resistant

For the maintenance of KNF pumps. Contains all necessary membranes, seals, etc.

Comfortable, precise and performant peristaltic pumps for continuous operation in various speed ranges. With control of speed and flow rate. Housings are available in white powder-coating (IP54 protection) and stainless steel ("i" models, IP65 protection). With integrated RFID technology for detection of pump head and hose as well as automatic blockage detection and hose burst control. A control panel for the most important functions is integrated directly at the pump housing, the external control panel is equipped with a touch screen. The connection technology of the pump heads guarantees rapid handling.

• External control panel, detachable
• Pump drives with two different motors (50 or 100 watts) are available depending on the application, flow rate and medium
• Exchangeable pump heads in single-channel or multi-channel design (not included in scope of delivery)
• Reversible conveying direction
• Quick exchange of pump heads without the use of tools
• TFT touch screen with user-friendly menu
• Calibratable
• Integrated method memory
• Flow rate, calibration function, method memory programmable on the operating module
• USB and RS232 interface for PC connection
• Pump heads of other manufacturers can be used without difficulty via adapter

Scope of delivery: peristaltic pump rotarus^® flow, power supply, connection cable EU, UK, US, external control unit

Specifications	rotarus® flow 50 // rotarus® flow 100
Speed range:	0.2 ... 100 min-1 // 5 ... 500 min-1
Flow rate range:	0.0001 ... 1500 ml/min // 0.0036 ... 5400 ml/min (depending on pump head)
Working temperature range:	-4 ... 40 °C
Weight: Power supply:	7.3 kg // 10.1 kg 100 ... 240 V, 50/60 Hz

Accessories Pump heads rotarus® Accessories Accessories for rotarus® peristaltic pumps Accessories Rotary piston pump heads for rotarus® pumps

For use with all rotarus^® peristaltic pumps.

The DITABIS Aspiration Systems are made for the controlled aspiration of liquids from typical lab containers like cuvettes, tubes, microplates, petri dishes or roller bottles. They are also suited for the disposal of liquid biological or chemical waste and filtration of liquids by means of filter systems.

• Membrane vacuum pump
• 2L or 4L bottle incl. fast lock clutches, filter, ventilation insert and 3M silicone hose

Features AA series:

• Membrane vacuum pump turns on and off automatically
• AA 02/04 with 1 handle
• AA 24 with 4L bottle, 2 handles and Y connector
• Enlarge the automatic suction system by adding up to 4 working places and reduce your expenses for each user.

Features AC series:

• Membrane pump with manual switch-off
• 2L or 4L bottle

Features AZ series:

• Small membrane vacuum pump
• 2L or 4L bottle
• Bottle holder optional

Alternative Safety suction systems AE and AK series Alternative Safety suction system EcoVac

The electric neoprene diaphragm pumps are suitable for routine use in a microbiological laboratory. Controlled vacuum ensures that stressed microorganisms (e.g., bacteria) are gently concentrated on the membrane filter surface. This leads to lower mortality, which in turn leads to higher recovery rates and shorter incubation times.

• Low noise level
• Oil and maintenance free
• Single filtration with single bar or single filter holder (mini.vac)
• Parallel filtration with multiple strips (maxi.vac)

Specifications	Microsart® mini.vac // Microsart® maxi.vac
Power supply:	230 V / 50 Hz // 230 V / 50 Hz
Weight:	1,9 kg // 7,1 kg
Flow rate:	> 6,0 L/min // >22,0 L/min
IP code:	IP 20 // IP 44
Tube connection:	ID4 mm // ID9 mm
Dimensions (W x D x H):	164 x 90 x 141 mm // 261 x 110 x 204 mm
Power input:	65 W // 130 W
Max. Vacuum:	100 mbar // 100 mbar