Magnetic stirring bars

The cylindrical LABSOLUTE® magnetic stirring bars have a smooth surface. The PTFE coating makes them particularly resistant to chemicals and temperatures.

The LABSOLUTE® stirring bar retrievers in the lengths of 150, 250 and 350 mm are suitable for removing magnetic stirring bars from vessels of all kinds. They have a strong permanent magnet (Alnico 5) with a 10 mm diameter. Due to the PTFE coating the stirring bar retrievers are particularly resistant to chemicals and temperatures.

The set of LABSOLUTE® magnetic stirring bars is a perfect assortment of the most common sizes for almost all applications. The cylindrical, smooth, PTFE-coated stirring bars come in a solid box with a transparent, hinged lid.

The set consists of the following 10 stirring bars: 1x 15 x 6 mm, 2x 20 x 7 mm, 2x 25 x 7 mm, 1x 30 x 7 mm, 2x 40 x 7 mm, 1x 50 x 7 mm and 1x 60 x 7 mm.

Circular, smooth and PTFE-coated. Packaging size: 10 pieces

PTFE-encapsulated stirring bar retriever with strong permanent magnet (Alnico 5), universal chemical resistance. For the removal of stirring bars from aggressive liquids, prevents loss of stirring bars. Lower end diameter 10 mm.

Universal alternative to oil bath

The reaction block allows syntheses to be carried out in round flasks at temperatures of up to 250 °C. As a result, with this system, oil as a heat transfer media is made redundant and your lab is a safer place. The reaction block ensures safety at work and prevents oil baths and heating mantles from overheating in your lab. The messy oil clean-ups that results from changing oil or removing flasks from an oil bath will be eliminated. Injuries and burns from hot oil will never happen again. Uniform mixing is also guaranteed because there is no interference to the magnetic field from the aluminium blocks. This system ensures optimal heat transfer from the heating plate directly into the medium.

• Universal model
• For round plates of 135 to 145 mm diameter

• Reaction blocks are available in six standard sizes
• Delivered adapter allows the use with either IKA or Heidolph magnetic stirrers
• Syntheses in round flasks without oil bath up to 250 °C
• Uniform and constant mixing
• High-precision thermal conduction directly into the reaction block
• Safe and clean working
• Made in Germany

Safety cover for LLG-Reaction block system to protect against broken glass and for heat insulation.

Encapsulated in PTFE. Oval. Ideal for round bottom flasks.

PTFE-coated. Cylindrical. Round, smooth surface. Versatile. Autoclavable. Further sizes available on request.

Triangular. PTFE-coated. Wedge-shaped, ideal for dissolving solids and re-suspending sediments due to scraping action. Angular surface produces high turbulence, even at low stirring speeds.

• Interrupted profile provides greater surface area and added turbulence when compared to the smooth surface of cylindrical bars
• Pivot ring aids in reducing friction and chattering
• PTFE encapsulated Alnico magnet
• Autoclavable

More than 4x higher torque transmissible. Unbeatably enhanced mixing effect in comparison to conventional stirring bars. Strong, stable, long-lasting magnetic field, with no demagnetization effect. Concave design for minimal surface contact and reliable rotation, triangular shape for powerful shear force and enhanced mixing at lower rotational speeds. Significantly higher rotation speeds achievable, high quality, even and sealed PTFE encapsulation. Conform to FDA requirements, steam sterilisable at 121 °C. Multiple enhancements against all types of magnetic stirrers.

For vessels with round bottom.

Magnetic stirring bars behrotest ^®, Set 1 in a transparent box with hinged lid
Consisting of: 2x 20 x 6 mm, 2x 25 x 6mm, 2x 30 x 6 mm, 2x 40 x 8 mm, 1x 50 x 8 mm, 1x 60 x 9 mm

Magnetic stirring bars behrotest^®, Set 2 in a transparent box with hinged lid including magnetic stirring bar retriever, length 245 mm
Consisting of: 1x 15 x 6 mm, 2x 20 x 6 mm, 2x 25 x 6mm, 1x 30 x 6 mm, 2x 40 x 8 mm, 1x 50 x 8 mm, 1x 60 x 9 mm

Both sets with a deep insert for easier removal and sorting of the stirring bars.

With a permanent magnet on one end and holding ring on the other one.
Magnet is completely encapsulated.

PTFE-encapsulated stirring bar retriever with strong permanent magnet (Alnico 5), universal chemical resistance. For the removal of stirring bars from aggressive liquids, prevents loss of stirring bars. Lower end diameter 10 mm.

RS 1: Comprises of one each of a plain and a cylindrical Ikaflon^®stirring bar, 10mm to 80mm long and 25mm and 40mm long Trika^® triangular bars.
RS 2: Comprises of one each of IKAFLON^® 40 round, IKAFLON^® 40 glass, IKAFLON^® 30 power, IKAFLON^® 40 slide round, IKAFLON^® 40 ellipse, IKAFLON^® 25 cross, IKAFLON^® 9 crown, IKAFLON^® 25 bone and TRIKA^® 40.

For all beakers from 100 to 2000ml capacity. Comprises conical lid made of chemical-resistant plastic with stirrer bearing, two pipette openings and captive PTFE magnetic stirring bar with support shaft. Guarantees gentle running, with no de-coupling of the stirrer bar.

Ultra strong SmCo magnetic core, giving up to 3 x higher torque than conventional magnetic bars, ideal for highly viscous materials and difficult stirring conditions, PTFE-coated and autoclavable with no demagnetization.
New feature: Komet discs and rings for vertical operation, ideal for test tubes.

PTFE coated.

Stirring Bar SATELLITE 70
Extremely strong, abrasion-free and wear-free magnetic stirring bar, bearing on a tripod-construction, especially for the use in stainless steel vessels and in the case of media containing abrasive particles, e.g. sand or sediments, no direct contact between stirring bar and reaction vessel, therefore steady firm, wear-free, chemical resistance comparable to PTFE, recommended magnetic stirrers: 2mag MIX 1 XL and MIXdrive 1 XL.

Stirring Bar SATELLITE 140
Identical to SATELLITE 70, but for larger volumes/vessels, recommended magnetic stirrers: 2mag maxMIX, MAXdrive, FABdrive.

For test tubes or vigorous, eccentric stirring.

PTFE-encapsulated magnetic core (Alnico 5) axially mounted in a guide cage made of PTFE, universal chemical resistance. No shear action on the bottom of the beaker, smooth running in glass beakers also on an uneven bottom. The cage acts like a baffel and thus provides optimum mixing results.

The sealing rings on these bearings ensure a perfect sealing. The ground joint no longer sticks, the danger of breaking is reduced and the cone can be removed easily from the socket. A special gasket made of PTFE and an FPM o-ring which is compressed by a GL screw cap provide a good sealing of the stirrer shaft. This gasket can be exchanged after wearing. Suitable for vacuum, perfect bearing for stainless steel, glass and BOLA Stirrer Shafts.

PTFE-encapsulated magnetic core (Alnico 5), standard magnetic stirring bars, universal chemical resistance. Temperature resistance: from -200 to +250 °C. Cylindrical magnetic stirring bars offer excellent centering and smooth running characteristics.

Cylindrical, PTFE, white.

For magnetic stirring bars up to 80mm long.

• The pivot ring reduces the contact surface and enables the stirrer to adopt the optimum position
• For vessels with slightly uneven bottoms
• High turbulence even at low speeds

Smooth surface. With rings and permanent magnet AlNiCo V core.

Useful extension to the existing range of Bola stirrer shafts. The additional blades can optionally be fixed in your preferred position on every stirrer shaft with diameter 8,10 or 16 mm (a flat spanner is included). The stirrer blades are entirely made of PTFE, the mounting devices are made of a special PTFE-compound. A high chemical and thermical (-200 to +250 °C) resistance is assured. This "building block system" allows the user to define a stirrer of their own special requirements.

Multi-faceted shape provides greater surface area and added turbulence for more vigorous, thorough mixing when compared to the smooth surface of cylindrical bars.

• With pivot ring for better mixing conditions
• Alnico magnet encapsulated with Teflon^® brand PTFE coating
• FDA Grade, USP Class VI
• Good chemical compatibility
• Autoclavable
• Manufactured in a registered ISO 9001:2015 facility

Multi-faceted polygon shape with increased surface area creates added turbulence relative to similar sized, smooth cylindrical bars to provide thorough mixing.

• Alnico magnet encapsulated with Teflon^® brand PTFE coating
• FDA Grade, USP Class VI
• Good chemical compatibility
• Autoclavable
• Manufactured in a registered ISO 9001:2015 facility

Flask carriers for Magnetic stirrers with or without handles as indicated.

For holding round flasks when used with magnetic stirrers. Made of anodised aluminium. Can be used up to max. 180 °C.

Fits on magnetic stirrers: RCT basic, RET basic, RH basic, RH basic white, RH digital, RH digital white, RET control-visc, RET control-visc white, IKA plate (RCT digital), C-MAG HS 7 control (only with adapter).

Please order the appropriate inlay for the designated flask size.

Magnetic core (Alnico 5) encapsulated in borosilicate glass, cylindrical shape, extremely smooth surface prevents from penetration of substances, non-porous, non-contaminating, universal chemical resistance. FDA conformity. Temperature resistance -200 bis +250 °C.

Powerful Stirring

Shaft diameter: 8mm

Blade and Half-Moon Impeller

• These impellers are recommended for applications which require an average speed
• For mixing products with average viscosity
• Models BR 12, BR 14 and HR 18 come with collapsible blade for narrow neck vessels

• These impellers are recommended for applications which require an average or high speed
• For mixing products with medium or high viscosity
• Excellent mixing properties for homogenisation and suspensions
• These models create an axial flow

• These impellers are recommended for applications which require an average speed
• For mixing products with average viscosity up to <500mPas
• Ideal for gassing of liquids
• These impellers create a radial flow

• These impellers are recommended for applications which require a low speed
• For mixing products with medium or high viscosity

PTFE coated.

Cylindrical, with pivot ring. For vessels with slightly uneven bottoms. Alnico V magnetic cores. Maximum operating temperature 270 °C.

PTFE coated.

• Steady spinning position
• Good stirring action

With pivot ring. PTFE-encapsulated magnetic core (Alnico 5). Universal chemical resistance. This shape provides a bigger surface area and a very steady spinning position with additional turbulences. Temperature resistant from -200 to +250 °C.

• Can be bent as required (the shape is permanently retained
• Round ends

Round profile. Made of a highly magnetic material (rare earth samarium-cobalt) with PTFE coating.

PTFE coated.