Ultrasonic homogenisers

Titanium probes.
For connection to stepped horns/booster horns.

Titanium, approx. length 100 mm.

MS0.5 - MS10: Sonotrodes made of titanium, approx. length 80 mm.
T1: Timer from 00:00 to 99:59 (min:sec).

Booster horns, stepped horns for connection of interchangeable sonotrodes (probes). Further booster horns are available on request.

For SONOPULS HD 2070.2, HD 2200.2, HD 4100 and HD 4200. For indirect ultrasonic irradiation.

• BR 30 cup booster enables highly intensive sonication of small samples, disruption of cells or sonification of pathogenic or toxic substances.
• EH 3.1: Microtube holder for BR 30 for simultaneous sonification of pathogenic and toxic materials with: 1 perforated disc for 3 x 1.0 ml or 2.0 ml microtube cups each, 1 perforated disc for 3 x 0.5 ml microtube cups each, 1 perforated disc for 8 x 0.2 ml RPCR cups each

Stainless steel, sealed, vibration-free reaction vessel with cooling jacket. For direct ultrasonic irradiation. For connection to SH 70 G or SH 213 G with TT 13. For HD 2070.2 and HD 2200.2. homogenisers. Flow rate up to 30 L/hr.

For indirect ultrasonic irradiation

• Flow-through standard horn FZ 5 G with external screwthread and titanium flat tip TT 13 FZ
• Flow-through standard horn FZ 7 G with external screwthread and titanium flat tip TT 13 FZ

For direct ultrasonic irradiation.

Stainless steel.
For covering bath tanks, as outlined below.

PTFE sleeve adapters for mounting probes into standard ground joint vessels. For use with HD 2070.2 / 2200.2 / 4100 / 4200 / 4400 homogenisers.
NA 29 G: for vessels with standard ground joint 29/32 and for horns SH 70 / 213 G / 100 G / 200 G
NA 45 G: for vessels with standard ground joint 45/40 and for horns SH 70 / 213 / 219 / 225 G / 200 G / 400 G

Titanium sonotrodes.
For connection to stepped horns/booster horns.

Titanium sonotrodes.
For connection to stepped horns/booster horns.

Sonotrodes made of titanium. With M6x0.75 male thread. Autoclavable.

Sonotrodes S26d2D and S26d7D with seal for closed systems for use with flow cell reactor.

The USBB series has been developed especially for the noise insulation of ultrasonic baths in the laboratory.
Advantages:

• High noise reduction up to 30dB(A). That means a drop in noise of 90 to 95%
• Available in four different sizes for mostly all ultrasonic baths, compatibility list for Bandelin Ultrasonic baths on request
• The cover can be completely opened, so the removal of the basket is very easy to handle
• Smooth and easy handling of the cover, no additional space needed when opening, so the box can be placed and operated under extractor hoods
• Control panel stays visible. Thanks to the transparent front, the progress of the washing program can be observed anytime
• Equipped with fast access openings on the front and both sides to operate the ultrasonic bath or to drain the cleaning agent
• Integrated fan to remove vapors
• Recessed grips on the sides for easy transportation
• Powder coated, robust and easy cleanable surface

Digital ultrasonic processor, 200 watts, for handheld and stand-mounted use, frequency 26kHz (auto-scan), amplitude 20-100%, pulse 10-100%, titanium horn Ø10mm (max. amplitude at horn 70µm), colored touch-screen, amplitude or power control, countdown (timer): 0.1sec to 99 days, shutdown when final energy input reached (Ws, Wh, kWh), autom. Calibration of the amplitude-dependent idle power, data recording: amplitude, power, time, temperature on internal SD/USB ComboCard (1GB), display and remote control via browser on PC/MAC without software installation, remote control via PLC, with temperature sensor, temperature indication: °C/°F (-50°C to 200°C), temperature monitoring, dry running protected, sample illumination, anti-bacterial plastic housing, simplified exchange sonotrodes, power supply 100-240V~, 50-60Hz, IP41 grade, set weight: 1300g, Carrying case incl. fixture for stand STH-12 and 3m network cable

Suitable for homogenising, desagglomerating, emulsifying, suspending, accelerating chemical reactions or disruption of cells, bacteria, fungi or spores. The devices of the SONOPLUS 4000 series are characterised by optimised process times and quickly available reproductive results.

• LC display for amplitude, pulse level, time and power
• Pulse mode, AMPLICHRON^®-circuit
• Data memory
• Batch mode/sequencing
• Temperature display and measurement
• Remote control via PC RS 232
• Interference suppression

• HF generator GM 4200
• Ultrasonic converter UW 50
• Titanium probe TS 102, diam. 2 mm

Suitable for homogenising, desagglomerating, emulsifying, suspending, accelerating chemical reactions or disruption of cells, bacteria, fungi or spores. The devices of the SONOPLUS 4000 series are characterised by optimised process times and quickly available reproductive results.

• LC display for amplitude, pulse level, time and power
• Pulse mode, AMPLICHRON^®-circuit
• Data memory
• Batch mode/sequencing
• Temperature display and measurement
• Remote control via PC RS 232
• Interference suppression

• HF generator GM 4200
• Ultrasonic converter UW 100
• Standard horn SH 100 G
• Titanium probe TS 103, diam. 3 mm

Suitable for homogenising, desagglomerating, emulsifying, suspending, accelerating chemical reactions or disruption of cells, bacteria, fungi or spores. The devices of the SONOPLUS 4000 series are characterised by optimised process times and quickly available reproductive results.

• LC display for amplitude, pulse level, time and power
• Pulse mode, AMPLICHRON^®-circuit
• Data memory
• Batch mode/sequencing
• Temperature display and measurement
• Remote control via PC RS 232
• Interference suppression

• HF generator GM 4200
• Ultrasonic converter UW 200
• Standard horn SH 200 G
• Titanium probe TT 213, diam. 13 mm

Ultrasonic processing vessels. Plastic and Titanium alloy (TiAl6V4). For indirect ultrasonic irradiation. BB 6 fits directly to UW 200 / UW 2200. Microtube holder EH6. Stainless steel. For simultaneous, contact-free ultrasonic irradiation of up to 6 samples using the ultrasonic homogeniser HD 2200.2 / HD 4200 and ultrasonic processing vessel BB 6.

For manual operation or for stand use, frequency 30kHz, automatic frequency tuning system, amplitude adjustable 20% to 100%, pulse 0 to 100%, dry running protected, in portable case, with mounting for stand STH-16 and mounting tools, 230V a.c.

For enlarging the length of the probe and to operate in deep vessels. They are mounted between standard or booster horn and titanium flat tip.

To reduce the noise level when sonicating samples with an ultrasonic homogeniser. The lower part of the interior and the removable bottom tray are made of stainless steel and are therefore chemically resistant and easy to clean.

• Noise reduction of up to 30 dB-AU
• LED interior lighting
• Acrylic glass window
• With effective ventilation system
• With opening (40 x 70 mm) for cooling tubing, sample circulation or the SONOPULS temperature sensor on the back
• Removable bottom tray
• Easy retrofitting for use with sonotrodes or cup booster possible

Suitable for homogenising, desagglomerating, emulsifying, suspending, accelerating chemical reactions or disruption of cells, bacteria, fungi or spores. The devices of the SONOPLUS 4000 series are characterised by optimised process times and quickly available reproductive results.

• LC display for amplitude, pulse level, time and power
• Pulse mode, AMPLICHRON^®-circuit
• Data memory
• Batch mode/sequencing
• Temperature display and measurement
• Remote control via PC RS 232
• Interference suppression

• HF generator GM 4400
• Ultrasonic converter UW 400
• Standard horn SH 400 G
• Titanium probe TS 425, diam. 25 mm

Ultrasonic homogeniser consisting of generator and transducer for flexible use in various laboratory areas. Ideal for sample preparation for cell disruption, homogenisation, dispersion and emulsification of samples. The ultrasonic homogeniser can be used both as a hand-held device and on a stand.

• Colour touch display
• Digital setting and control functions
• Automatic frequency tuning
• Amplitude and pulse adjustable
• Countdown timer from 0.1 s to 99 days
• Operation and control via LAN for display and remote control via browser without software installation on PC
• Ethernet interface
• Temperature display in °C and °F
• Data recording on internal SD card (1 GB)
• 2 LEDs for sample illumination
• Dry run protection