Heating-Thermostats

Suitable for use in microbiological, histological, clinical, industrial and environmental laboratories. Various types of optional heating blocks are available as accessories for the LLG-uniBLOCKTHERM.

• Digital control with LED display
• Can be used up to 120 °C
• For timer and continuous operation
• Can be used with different heating blocks
• 1 x block unit
• With overheating protection

Heating block with aluminium beads as an alternative to exchangeable blocks with borings.
The aluminium beads ensure high thermal conductivity. Various types of vessels, such as tubes, bottles, and microtitre plates can be individually assembled and simultaneously tempered in the dry bath. Easy to remove from the LLG-uniBLOCKTHERM thanks to two handles. The heating block holds a max. capacity of 700 ml.

Scope of supply: Heating block, aluminium beads (1 kg)

For use with Immersion circulator LX and MX.

The effective liquid depth is reduced in order to place small or shallow containers in the bath.

Drain syphon SY1: For the rapid draining of baths.

Heat exchange coil CW5: For use with precision and general purpose stirred baths. Temperature range 2 °C above coolant temperature. Coil diameter/l mm 77/55, pipe bore inlet/outlet 7mm.

PP spheres PS20: Between operating temperatures 60 °C and 100 °C and below room temperature a lid or layers of polypropylene spheres can be used. Above 100 °C a lid must be used.

Stainless steel bridge for the new CORIO™ series.

CORIO™ CD Heating Circulators for internal and external temperature applications with stainless steel baths for working temperatures from 20 °C to 150 °C. CORIO™ Heating Circulators feature professional technology for demanding applications. These units facilitate internal temperature control in the bath tank or control of externally connected applications.

• For internal and external applications
• Bright, white, easy to read display
• Very quiet
• Pump change-over between internal and external circulation
• USB connection
• High-quality bath tanks made of stainless steel with bath lid and drain tap
• Integrated cooling coil for counter-cooling

Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to +200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.

The device is available in single, dual, and four block configurations and provide a broad temperature range up to 150 °C, which makes them useful for a variety of applications in molecular biology, histology, clinical, environmental, and industrial laboratories.

• Single, dual and four block capacity
• Dual display
• USB connectivity enables traceability of data
• Molded block chamber

Designed for applications that require repeatable results and superior temperature stability. These multi-purpose units are ideal for incubation and activation of cultures, enzyme reactions, immunoassays, melting/boiling points, and a wide variety of other laboratory procedures. Integral support rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the models accept separate interchangeable modular blocks, accommodating various tube sizes from 0.2 ml microtubes to 50 ml centrifuge tubes. Each block has a thermometer well for measuring block temperature. Efficient heating due to close tube-and-block contact for maximum heat retention.

• Microprocessor Control
• LED Display
• Temperature Calibration Mode
• Caution Hot Indicator
• Audible Alarm

For internal and external applications. The thermoregulators with maximum flexibility can be mounted with the sturdy bath clamp to any bath up to 50 litres.

• Easy switching between internal and external circulation
• Large colour TFT Display
• Easy to operate via central controller
• Integrated programmer for 8 x 60 program steps
• Continuously adjustable, powerful pressure pump
• USB interface
• External Pt100 sensor connection
• Class III (FL) acc. to DIN 12876-1

E-grade - innovative activation keys for the functionality to suit your budget and process requirements

Every application requires particular functions. If the circulator is to be used in a range of applications it will generally require greater functionality. The required functionality grows with the complexity of the application. The innovative "E-grade" has the answer. Models with the Pilot ONE Controller have a comprehensive range of functions suited to the classical temperature control applications. The E-grade allows the functionality to be extended at any time to suit new process requirements and budget. E-grade stands for electronic upgrade and it is simple to do: To extend the functionality a unit specific code is entered via the controller. This code is specific to the serial number of the unit and is either already entered at the factory for new units or it can be activated at a later date. The code is sent by email. There is no requirement for a hardware or software update.

The E-grade "Explore" for Unistats is more than just another functions package. It makes important information available to users of Unistat temperature control systems. Temperature values and temperature differentials as well as for the actual heating power, cooling power and pump power within the system are displayed on the touch-panel. E-grade "Explore" is an evolution of the existing Unistat technology. Existing sensors are utilised to make important process temperature and power data visible. In addition to making the data visible on the display of the device, it can also be accessed via the digital interfaces for further processing.

Application examples for E-grade^® "Explore":

• Process and product development and optimisation
• Use-Tests of raw materials, quality control
• Enhanced data collection for scale-up trials

For precise temperature control of internal and external applications.

• Simple control of complex applications
• Infinitely adjustable, extremely powerful pressure and suction pump
• Large, high-resolution TFT touch display with multilingual user interface
• Medium-contacting parts made of stainless steel
• Integrated programmer
• External Pt100 connection
• USB interface
• RS232 interface
• Ethernet interface
• High quality thermal insulation of the bath tanks
• Integrated drain cock for easy and safe emptying
• Classification III according to DIN 12876-1

Heating bath circulator for internal and external temperature applications with transparent bath tank and pump connections.

• Bright, white, easy to read display
• Very quiet
• Pump change-over between internal and external circulation
• USB connection
• Class III (FL) according to DIN 12876-1

Heating bath circulator for internal and external temperature applications with stainless steel bath tank and pump connections.

• Bright, white, easy to read display
• Very quiet
• Pump change-over between internal and external circulation
• USB connection
• Integrated drain screw (except for B5)
• Class III (FL) according to DIN 12876-1

Heating bath circulators are suitable for temperatures up to 200 °C or 300 °C depending on model. The Compatible Control models have a continuously variable pressure and suction pump. The pump pressure can be controlled with an optional pressure sensor, and so can protect your valuable glass-ware from breakage. The machines are preferred and used for temperature control of externally connected applications. Additionally there is the ability to control the temperature of objects placed directly in the open bath.

CORIO™ C Open Heating Bath Circulators for internal temperature applications with stainless steel bath tanks for working temperatures from 20 °C to 100 °C, complete set with bath tanks.

• For internal applications
• Bright, white, easy to read display
• Whisper quiet
• Integrated drain screw (except for B5)

CORIO™ C Open Heating Bath Circulators for internal temperature applications with transparent bath tanks for working temperatures from 20 °C to 100 °C.

• For internal applications
• Bright, white, easy to read display
• Whisper quiet

Good things come in small packages! Thanks to their low bath volumes the models CC-104A und KISS-104A (with polycarbonate bath) as well as the CC-202C and KISS-202C (with stainless steel bath) are especially suitable for controlling the temperature of small external applications. All models are fitted with rear mounted M16 x 1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump. The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and 0.05 K for the KISS models. Models CC-202C and KISS-202C are fitted with an integrated cooling coil as standard. With the models CC-104A and KISS-104A the cooling coil is an optional extra.

Telescopic bridges are extendable from 330 to 680 mm.

The insulated stainless steel baths are suitable for use up to 200°C. All models have a bridge-mounted immersion circulator. With a pump adapter, this combination can also be used with externally closed and externally open (with option level control) applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.

CORIO™ CP thermoregulators are capable to control the temperature of external applications in combination with an optional pump set. Suitable for bath vessels with a volume of up to 50 l.

• For internal and external applications (accessories required)
• Bright, white, easily visible display, even from a distance
• Very quiet
• Easy operation
• Low-level warning system
• Pump switch for internal and external circulation
• Powerful, continously variable pump
• USB connection
• RS232 interface
• Class III (FL) according to DIN 12876-1

Immersion circulator for all kinds of water baths. It clamps securely to both straight and curved tank walls. The patented, closed housing protects the user and the heating element.

• Temperature stability +/- 0,07 °C
• Minimum working depth 7,5inch/19 cm
• Large LCD-display
• Display resolution 0,1 °C
• Displays actual and set point temperature simultaneously
• Integrated pump and heater protection
• Integrated over-temperature protection
• Low liquid level protection
• Included clamp for straight and curved tank walls
• Maximum pressure 0.12 bar / 1.8 psi with a maximum pressure flow rate of 11.9 l/min

Immersion circulator with powerful pressure/suction pump and Pilot ONE controller with Plug & Play technology. The device is equipped with overtemperature and low level protection. The scope of supply includes a screw clamp, which allows the thermostats to be mounted very easily on any type of vessel. The electronic upgrade function "E-grade" allows a simple and cost-effective functional expansion at any time.

• Large and full colour 5.7" TFT touchscreen
• Simple menu navigation in 13 languages
• Programmer with calendar/clock functions
• Ethernet, RS232 and USB interface
• Pt100 external sensor connection
• 2-point calibration for control sensors
• Safety class III (FL) acc. to DIN 12876

Permits the remote set-up and programming of thermostats with interface from a PC. Real-time temperature / time profile and graphic representation of processes. Profile documentation and programme memory on disk. Minimum requirements: Microsoft Windows XP, Vista (32/64 bit), or Windows 7 (32/64 bit). Pentium III / Celeron 866 MHz or equivalent.

Badsystem mit MX-Temperaturregler. Die Reglerbrücke liegt sicher auf dem Badgefäß auf, lässt sich zur Reinigung aber völlig problemlos entfernen. Die große Badöffnung ermöglicht ungehinderten Zugang zu den Proben.

• 3,25" LCD-Display
• Druckpumpe mit 1 Geschwindigkeit
• Externe Umwälzung: Geschlossener Regelkreis
• 1-Punkt-Kalibrierbarkeit
• Klasse I (NFL) nach DIN 12876-1

• With graduation
• Laboratory flange LF
• Groove
• Flat bottom
• Two connectors with threads GL 14 or GL 18
• Made of DURAN^® tubing

The refrigerated baths K12 to K25 use natural refrigerants. The immersion circulator controls the temperature. In combination with an immersion circulator, these refrigerated baths can cover the complete temperature range. The refrigeration system offers active cooling, in continuous operation over the complete working range.

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.005°C
• Time/temperature programming
• Intuitive 4.3" (10.9 cm) SmartTouch display
• 11 languages: French, German, Spanish, Chinese, Arabic, English, Portuguese, Russian, Hindi, Italian, Korean
• Variable speed pump with open- and closed-loop external circulation capability
• Pump pressure max. 3.6 psi (0.25 bar)
• On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, remote on/off and external temperature probe
• Event scheduling (time and date) with real-time clock
• Review temperature trends for up to 10 days
• Multiple selectable "home" screens
• On-screen help
• Automatic and/or user-adjustable performance optimization
• Safety class III
• 10-point calibration capability

The circulators are available in 4 bath sizes combined with 4 different temperature controllers. The large, 180° freely rotatable display Swivel 180™ allows good visibility and control of the values set from different angles.

• Reservoir sizes ranging from 7 liters to 75 liters
• Pressure and suction pump (selected models)
• LidDock™ lid holder
• DuraTop™, precision-molded phenolic bath top resists laboratory chemicals
• WhisperCool^® Environmental Control System
• Cool Command™ refrigeration system
• Washable air filter
• Large bath opening and drain
• Easy hook-up of fluid connections
• Intuitive setup and operation, featuring multi-language help and screen prompts
• Simplified setup and maintenance
• Over-temperature protection
• Safety classes, according to DIN 12876-1 Class III standards for use with flammable liquids (selected models)

• Temperature Stability: ±0.04°C
• Large 3.75" universal icon and English display
• Pressure Pump with two speeds
• Pump pressure max. 2.9 psi (0.20 bar)
• On-board connectivity: RS-232 serial output
• Adjustable over- or under-temperature
• Automatic performance optimization
• Safety class I
• Single-point calibration capability

Transparent bath tanks made of PC for immersion thermostats CORIO™.

Stainless steel bath tanks (insulated) for immersion thermostats CORIO™.

Universal use with precise temperature control for simple applications in a setting range from 0 to 100 °C.

• 3 programmable temperature presets
• Low liquid protection and fixed over temperature cut-out
• Visual alarm in case of malfunctions
• Clear, bright, 4 digit LED display
• Thermostat can be used in combination with any other Grant stainless steel tank or with a T-CLAMP with any vertical sided tank

For general applications requiring precise temperature control in a setting range of -15 to 120 °C.

• Simple, intuitive user interface: dial and 2 function buttons
• 3 programmable temperature presets
• Low liquid protection and adjustable over temperature cut-out
• Countdown timer with audible alarm
• Clear, bright, 4 digit LED display
• Thermostat can be used in combination with any other Grant stainless steel tank or with a T-CLAMP with any vertical sided tank

For excellent temperature stability and temperature control for demanding applications in a setting range from -15 to 150 °C.

• Powerful integral pump for external fluid circulation
• Large, bright full colour display with a choice of 5 languages
• 5 point user calibration
• Low-liquid detection (float switch)
• Easy to program via interface or remotely via PC / Laptop with Labwise® software

For sophisticated applications requiring complex programming and ultra-precise temperature control in a setting range from -15 to 200 °C.

• Powerful integral pump for external fluid circulation
• Large, bright full colour display with a choice of 5 languages
• 5 point user calibration
• Low-liquid detection (float switch)
• Memory capacity for 10 programs with 100 segments

High efficiency stainless steel (ST) tanks (range -15 °C to 200 °C). Drain tap included on ST12, ST18, ST26, ST38. Raised feet for carrying repositioning and retort access. Accessory polypropylene spheres or a lid must be used at temperatures between 60 °C and 100 °C. Above 100 °C only a lid must be used. Accessory cooling is required for temperatures below ambient.

Please order lid and PP spheres separately.

Manufactured in stainless steel, with lifting handles. Available for test tubes with an external diameter of 10 to 13 mm, 16 to 19 mm, 24 mm or 30 mm as well as for 0.5 ml or 1.5 ml microcentrifuge tubes.

QR racks can only be used with 5 litre baths.
VR racks can only be used with 12, 18, 26 and 38 litre baths.

The CORIO™ C Immersion Circulator is the basic model of the CORIO™ circulator portfolio. The bath attachment clamp is included in delivery and facilitates mounting of the circulator on any bath tank up to 30 liters. With a few simple steps you can install a pump set onto the CORIO™ CD Immersion Circulator. In no time at all, your circulator is ready for temperature control of an external application.

• Precise temperature control
• For internal standard applications
• Immersion depth: 7.5 to 16.5 cm
• Bright, white, easy to read display
• Whisper quiet
• Easy operation

• For bath tank up to 30 liters
• Class I (NFL) according to DIN 12876-1
• Circulation capacity 6 l/min at 0.1 bar

• For bath tank up to 50 liters
• Pump change-over between internal and external circulation
• USB interface
• Class III (FL) according to DIN 12876-1
• Circulation capacity 15 l/min at 0.35 bar

With a few simple steps you can install a pump set onto the CORIO™ CD immersion circulator. In no time at all, the circulator is ready for temperature control of an external application.

• Precise temperature control
• Bright, white, easy-to-read display
• Whisper quiet
• Easy operation
• For bath tank up to 50 litres
• Pump change-over between internal and external circulation
• Powerful, continously variable pump
• USB interface
• Timer: 0 to 999 min
• Class III (FL) according to DIN 12876-1

The transparent polycarbonate baths are suitable for use up to 100°C. An immersion thermostat is mounted on the bath bridge for all models. With a pump adapter, this combination can also be used with external, closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.

For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.

Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use.
The two general purpose heating circulators offer excellent temperature stability and uniformity with a cooling/heating range of 0 °C to 100 °C* (T100) and -15 °C to 120 °C* (TC120).
*For using at or below room temperature you need additional flow coolers C1G (9.920 765) or C2G (9.920 766).

Features:
T100: Visual alarm, 2 point recalibration, fixed over temperature cut-out
TC120: Visual and audible alarm, timer, 2 point recalibration, adjustable over temperature cut-out, pump for external circulation

T Clamp: For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.

Models with clamps available on request.

Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use. The general purpose heating circulator offers excellent temperature stability and uniformity.

• Clear, bright 4 digit LED display
• 3 programmable temperature pre-sets
• Visual and audible alarm
• Timer from 1 min to 99 h 59 min
• 2 point recalibration
• Adjustable over temperature cut-out
• Pump for external circulation