Shaking incubators

AS 4000.1 Universal attachment
For various types of vessels. Infinitely variable clamping rolls allow universal adaptation to various vessels.
Included with delivery: 1 x AS 1.400 Basic holder, 6 x AS 1.401 Clamping roll, 12 x AS 1.402 Fastening screw
AS 4000.2 Fixing clip attachment
For shaking flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips).
Number of fixing clips (volume): 50 x AS 2.1(25ml), 48 x AS 2.2 (50ml), 25 x AS 2.3 (100ml), 16 x AS 2.4 (250ml), 12 x AS 2.5 (500ml), 7 x AS 2.6 (1000 ml)
AS 4000.3 Dish attachment
For smooth shaking operations in the low viscosity range, e.g. for cell cultures, nutrient media in Petri dishes, culture bottles and vessels with a low centre of gravity. With integrated slip-resistant foil (PP).

Our Adhesive Flask Mat is an alternative to flask clamps for securing odd shaped objects such as bottles, volumetric flasks and test tube racks to a shaker platform. Simply place the 21 cm x 21 cm Adhesive Flask Mat on an anodised aluminum or stainless steel shaker platform and secure the vessel to it. It will hold Erlenmeyer flasks as large as 4 l that contain 2 l of media at speeds up to 250 rpm.
The mat is not suitable for use in water baths.

• Easy-to-view samples. The white background makes it easy to determine when to harvest your samples
• Simple to clean. Can be restored to like new condition by wiping with alcohol
• Long lasting. Months of use without losing adhesive properties

The Benchtop Shaking Incubator is a combination of a shaker and a temperature chamber, designed for shaking and heat treatment of sensitive samples. It replaces two devices, reduces time and space needed. It is very suitable for biochemistry, microbiology and medicine laboratories in which thermal and shaking treatment of samples is a daily used routine.

• High temperature working range
• Can be used in cold rooms too
• Digital readout of all parameters - read temporary or preset RPM, temperature, time, acceleration
• Parameter changes while the device is running (except timer)
• Last parameter values reside in the memory even if the device was switched off
• Precisely adjusted and maintained temperature regulation within 0.5 °C of absolute deviation from the set temperature
• HOLD and STEP time function with 1 minute resolution
• Easy interchangeable platforms
• Lid sensor

Clamps to be placed on the shaking tray.

CO₂-resistant orbital shaker with variable speed and external digital control unit. Suitable for use in CO₂ incubators.

• Speed adjustment from 30 to 300 min^-1
• Brushless magnetic shaker motor
• External control unit with LED display for easy setting and display of device parameters without opening the incubator door
• Minimum heat output
• With timer
• Stainless steel construction for protection against atmospheres up to 20 % CO₂ content

Modular system for shaking, mixing and heating with visual reaction control.Compatible shakers are Duomax 1030, Polymax 1040, Titramax 1000, Unimax 1010 and Promax 1020.

• Heating module with a heating capacity of 300 W allows for quick and gentle temperature adjustments up to 65°C
• Digital temperature setting of target temperature of 65 °C and separate display for actual temperature (accuracy of ±2°C up to 50°C and ±4°C over 50°C)
• Low noise blower allows for quick and even temperature distribution throughout the entire enclosure
• One incubation system can be used for several shakers, fast conversion possible
• To protect samples from thermal damages this unit features a safety circuit to prevent overheating
• Unlimited visual reaction control due to transparent and non-fogging PETG hoods
• 3 hoods options available: A flat hood for small vessels and mictrotiter plates, a high hood for all common medium sized vessels and a high hood XL for larger Erlenmeyer flasks up to 2000 ml
• The incubator hoods open instantly and interlock in any position

Innovative incubator shaker design allowing unattended operation in a temperature-controlled environment.

• large LED display for speed and time settings
• controls with antimicrobial coating for reduction of bacteria
• integrated PID temperature control (two Pt1000 temperature sensors can be used)
• socket in the work area for connection of an additional temperature sensor e.g. PT1000.60 (included in delivery)
• electronic temperature and speed control
• electronic timer switch: 0 to 999h (set by the minute or by the hour)
• KS 4000 ic with built-in cooler for connection to an external cooling unit e.g. RC 2 basic
• unit switches off automatically if disturbed
• unit stops automatically when hood is lifted
• collecting tray for spillages with draining tube at rear of unit
• all functions can be controlled and documented using labworldsoft^® software
• attachments not included - Please order accessories as required

Innovatively designed, compact incubator shaker to safely allow unattended operation in a temperature-controlled environment. The unit has a large LED display for speed, temperature and timer. An integrated PID temperature control allows the use of PT 1000 temperature sensors to assure highly accurate temperature control. The electronically controlled incubator comes equipped with RS 232 and USB ports for PC interface. All functions can be controlled and documented using labworldsoft^® (software sold separately).

• Controls with antimicrobial coating for reduction of bacteria
• Junction box in the workspace for connection of an additional temperature sensor, e.g. PT 1000 (included with delivery)
• Wide range of attachments allows for using almost all shapes and sizes of vessels
• Unit stops automatically when hood is lifted
• Collecting tray with drain hose on rear of the unit
• Electronic timer
• Error code display

The Incubating Light Duty Orbital Shakers are designed to heat and shake a variety of samples. The Microplate Shakers are optimized for shaking microplates, deep-well plates, or micro-tubes. Available with opaque lid for light sensitive samples.

• LED displays for temperature, speed and time
• Timer with audible alarm
• Calibration mode for temperature
• Microprocessor Control
• PID Temperature Controller
• Triple Eccentric Drive
• LED Display
• Temperature Calibration Mode
• Overload Protection
• Speed Ramping Feature
• Audible Alarm
• Spill-Resistant Design
• Polycarbonate Lid

• Spacious chamber holds six 2L flasks.
• View speed, time and temperature simultaneously.
• Choose from three temperature ranges.
• Clear lid allows sample viewing without disturbing chamber atmosphere.
• Choice of analog or digital operating systems.
• Triple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation, even at high speeds.
• View speed, operating time and temperature simultaneously on three individual LED displays.
• User-adjustable speed calibration
• Unbalanced load sensor
• Soft start feature
• Over-temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails.
• Five year warranty on parts, one year labor and LIFETIME on mechanism.

• Holds up to 4 x 1L flasks
• Requires minimal bench space
• Clear lid lets you view samples without disturbing internal temperature
• Triple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation, even at high speeds
• Monitor and control chamber temperature range with ±0.1 °C accuracy and ±0.5 °C uniformity at 37 °C
• View speed, operating time and temperature simultaneously on three individual LED displays
• Visual/audible alarms alert you to temperature deviations. Heat turns off if temperature deviates ±1 °C of set point
• Soft start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure
• Retains parameters during power failure and restarts unit automatically after power is restored
• Over-temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails
• Safety interlock stops platform motion when lid is opened
• 5 year warranty and 10 year on drive mechanism

• Available in incubated or refrigerated models.
• Units can be stacked two high on the floor with the stacking kit accessory.
• Two adjustable-height shelves provide added storage.
• Large viewing window and internal light offer sample visibility.
• View temperature, speed and time simultaneously on three individual displays.
• Door can be hinged from the right or left by the user for convenient placement in lab.
• Triple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation, even at high speeds.
• Visual/audible alarms alert you to temperature deviations. Heat turns off if temperature deviates ±1°C of set point.
• Shaker shut down and visual/audible alarms signal if unit operates ±10% of set speed, preventing shaker from moving.
• Unbalanced load sensor stops platform motion when excess vibration is detected visual/audio alarms signal until condition is corrected.
• Soft start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure.
• Retains parameters during power failure and restarts unit automatically after power is restored.
• Over-temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails.
• Safety interlock stops shaking motion when the door is open.
• 5 year warranty and 10 year on drive mechanism.

Can be Stacked Two to Three High on the Floor for Space Savings

• Choose from two temperature ranges to fulfill a number of molecular biology applications.
• HEPA filter ensures air inside the chamber remains clean and reduces cross contamination improving culturing conditions.
• Slide out platform provides convenient 100% sample access.
• Crevice-free Type 304 stainless steel chamber with coved corners and built-in drain keeps spills within the work area and promotes easy cleaning.
• Chamber is tall enough to accommodate 2L Erlenmeyer flasks.
• Top platform height is under 61.0 in. (154.9 cm) when units are stacked three high, ensuring ease-of-use and convenient accessibility.
• Easy to clean platforms are constructed of 5/16 in., heavy duty brushed anodized aluminum, which does not chip or rust.
• Large viewing window and internal xenon light allow sample visibility minimizing the need to open the chamber door.
• Electronic components and HEPA filter are easily accessed from the front of the unit, eliminating the need to move the shaker during regular maintenance or service.
• 5 year warranty and 10 year on drive mechanism.

By combining the mixing operation with the incubation phase, reaction process times and operator workload are reduced and efficiency of many procedures is increased, resulting in a higher throughput.

• temperature range: +5 to 100 °C
• uniformity at 37 °C: ± 0.1°C
• shaking speed: 250rpm to 1400 rpm
• timed shaking operation: 1 min to 96 hours
• rapid heat-up
• continuous or timed operation, with alarm buzzer and automatic switch-off facility
• incl. interchangeable block
• mixing and incubation phases are combined reducing reaction processing times

Incubator with built-in orbital shaker. Stable temperature conditions and a broad temperature range enables the use of this incubator for cell cultures, washing blots, bacterial cultures, yeast cultures, entomology studies, egg hatching, hybridization washes, mixing and re-suspensions. Opening the door stops operation of the shaker. The incubator is supplied with one shelf.

• Temperature control system SmartChek™
• Broad temperature range
• High uniformity and accuracy
• Gasket door with large viewing area
• Adjustable shelves

The SIM-200D-M has been designed specifically to combine a bench top laboratory
incubator with the specific mixing action required for microtitre plates. With a tight orbit of 1.5mm and a high speed shaking action between 250rpm and 1250rpm even the smallest of vessels can be adequately mixed.
To minimize sample evaporation the SIM-200D-M is supplied with stainless steel water trays, these are strategically placed within the unit to maintain a humidity of up to 80%, thus dramatically reducing sample evaporation over a 24 hour period.

Stable and reliable orbital shaker-incubator for vigorous or even mixing and incubation of samples in a variety of flasks and vessels. For Life Sciences, suitable for growing cell cultures in flasks, extracting tissue samples at physiological, temperatures, and sample preparation processes, mixing of biological liquids as well as the incubation and cultivation of biological liquids, growing e-coli, bioluminescence preparation.

• Variable speed: 50 to 250rpm
• Digital control of time, temperature and shaking speed for accuracy and repeatability
• Display 2-line 16 character LCD
• Interchangeable platforms for shaking/incubating different vessels (please order separately)

VorTemp^™ 56 is supplied with interchangeable platforms for microtubes (56 x 1.5ml tubes, or small tubes with adapters) or microplates (accepts standard and deepwell plates, up to 2.0ml). VorTemp^™ 1550 includes platforms for 8 x 50ml and 18 x 15ml tubes.
The shaker in the VorTemp^™ 56 may be turned off, allowing the unit to be used as a static incubator.

• shake and incubate samples simultaneously
• interchangeable platforms
• broad temperature and speed range
• intelligent control with digital LED display

Test tube racks with adjustable inclination angle.

The AccuTherm is a temperature controlled mixer that uses peltier technology to rapidly heat and cool precious samples. The combination of heating/cooling with mixing makes the AccuTherm ideal for many life science research applications in the fields of molecular biology, biochemistry and clinical chemistry. It"s compact footprint incorporates an intuitive control panel with a large multicolor display, which allows users to easily program and view temperature, time and speed settings. Eight interchangeable aluminum blocks accommodate PCR plates and tubes ranging in size from 0.2ml to 15ml.

The Enviro-Genie^® is an incubator, rotator, rocker and stirrer in one compact unit. It is ideal for the study of microorganisms and tissue cell growth under strictly controlled conditions of temperature and agitation. Peltier technology ensures high degree of accuracy, uniformity and stability.

• Crystal-clear backlit LCD displays all parameters at a glance
• Magnetic stainless steel platform may be easily set to rock or rotate almost any container
• Two low and high speed magnetic stirrers incorporated, with revers stirring
• A variety of accessories are available to provide maximum application versatility
• Chamber air is gently and continuously re-circulated ensuring temperature consistency and uniformity
• Shatterproof window allows for inspection of samples without disturbing chamber environment
• Optional available: Horizontal orbital attachment for Western Blots and maintaining cells or solutions in suspension
• With visible and audible alarm for temperature and time
• With RS232 port for data acquisition and remote operation

For shaking and incubation of samples. The incubation chamber can be opened from 3 sides and tilted to the side to load the platform or take samples.

• Removable incubation chamber
• Very good temperature distribution
• Minimum temperature loss when opening the chamber
• The maximum working temperature of 75 °C is reached in 20 minutes
• Transparent incubation chamber

The Reciprocal shakers Varioshake impress with their top quality, durability and absolute reliability. Their stable, low-wear mechanics ensure particularly quiet and reliable continuous operation.

• The devices can be optimally equipped for every need thanks to the extensive range of accessories
• With »GFL Technology« for the highest quality, reliability and durability
• Compact design for a small footprint on work surfaces and for integration in standard incubators

The shaking incubators Varioshake are characterised by their highest quality, durability and absolute reliability. Their stable, low-wear mechanics ensure particularly quiet operation and reliable continuous operation. They are specially designed for mixing and shaking with precisely reproducible orbital motion and temperatures of up to 70 ° C.

• With optimal temperature distribution in the entire usable space and extensive functionality
• With »GFL Technology« for the highest quality, reliability and durability
• The devices can be optimally equipped for every need thanks to the extensive range of accessories

The Orbital shakers Varioshake impress with their top quality, durability and absolute reliability. Their stable, low-wear mechanics ensure particularly quiet and reliable continuous operation.

• The devices can be optimally equipped for every need thanks to the extensive range of accessories
• With »GFL Technology« for the highest quality, reliability and durability
• Compact design for a small footprint on work surfaces and for integration in standard incubators

The Orbital shakers Varioshake impress with their top quality, durability and absolute reliability. Their stable, low-wear mechanics ensure particularly quiet and reliable continuous operation.

• The devices can be optimally equipped for every need thanks to the extensive range of accessories
• With »GFL Technology« for the highest quality, reliability and durability
• Compact design for a small footprint on work surfaces and for integration in standard incubators