Cooling incubators

The cooled incubators with the unique ControlCOCKPIT for a quick and intuitive operation. Ideal at temperatures around zero and below. For rapid and precise alternation between heating up and cooling down times in ramp operation. Extraordinarily quiet.

Standard equipment :

• PID microprocessor control with integrated auto-diagnostic system
• Interior stainless steel, material 1.4301 (ASTM 304) very stable and easy to clean
• Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel (all sizes mounted on lockable castors)
• High-temperature connectors on the rear of the appliance for single-phase power connection according to country specific systems and IEC standards
• Internal data logger with a storage capacity of at least 10 years
• German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT
• Digital backwards counter with target time setting adjustable between 1 minute and 99 days
• The SetpointWAIT function guarantees that the process time does not start until the set temperature is reached at all measuring points - optional for temperature values recorded by the freely positionable Pt100 sensors inside the chamber.
• Adjustment of three calibration values for temperature and additional appliance specific parameters directly at the ControlCOCKPIT

• Available parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), fan speed, exhaust air flap position, programme time, time zones, summertime/wintertime
• Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error
• AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
• ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
• Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
• Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging
• Multiple overtemperature protection: Electronic temperature monitoring TWW/TWB (protection class 3.3 or 2) and mechanical temperature limiter TB (protection class 1) acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm

Series KB: Cooling incubators with compressor technology, for safe, reproducible incubation, even at high ambient temperatures. Temperature range: -10 °C to 100 °C (KB 23: 0 °C to 100 °C).

Series KT: Cooling incubators with thermoelectric cooling, combines exceptional performance with low energy consumption. Temperature range: 4 °C to 100 °C.

• Adjustable fan speed Controller with time-segment and real-time programming
• Inner door made of tempered safety glass
• 2 stainless steel racks
• Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
• Computer interface: Ethernet
• Data recording and USB interface (Series KT)

The new Avantgarde.Line incubators, with their exceptional efficiency and perfect temperature accuracy thanks to the very latest APT.line™ technology.

Series BD: Incubators with natural convection
Series BF: Incubators with forced convection

Equipment:

• Up to 30 % lower energy consumption compared to the previous model
• APT.Line™ technology for homogenous temperature distribution and accuracy
• Electromechanical control of the exhaust air flap
• Controller with LCD display
• Inner door made of tempered safety glass (ESG)
• 2 chrome-plated racks
• Stackable up to 115 l
• Temperature range Series BD: ambient temperature plus 5 °C to 100 °C
• Temperature range Series BF: ambient temperature plus 7-10 °C to 100 °C
• Class 3.1 integrated independent temperature safety device (DIN 12880) with visual alarm
• USB port for recording data
• Power supply 230 V, 50/60 Hz

BINDER incubators stand for optimal incubation and for results that are reproducible in every routine test, even under high batch throughputs in long-term operation.

Serie BD: Incubators with gravity convection.
Serie BF: Incubators with forced convection.

Equipment:

• Temperature range: from 5°C above room temperature to 100°C
• Independent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarm
• RS 422 interface for use with APT-COM™ DataControlSystem communication software
• Inner door made of tempered safety glass
• Power supply 230 V, 50/60 Hz

Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.

• Extremely quiet, vibration-free and space saving as no compressor is required
• No condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchanged
• LED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)

Heating and cooling seamlessly with one system thanks to Peltier technology. In this respect, cooled incubators IPP not only contribute to climate protection, but it also achieves an additional decrease in operating costs of up to 90% compared to compressor technology.

• Extremely quiet, vibration-free and space saving as no compressor is required
• No condensation in the interior chamber: due to the closed Peltier cooling system no outside air is exchanged
• LED light module for sizes 110 to 750 (as an option): dimmable LED light in three alternative colour temperatures (cold white light, warm white light or cold white and warm white light, dimmable in steps of 1 %)

• Outstanding temperature uniformity and stability to keep the samples in a safe environment
• CFC free/HFC free polyurethane insulation foam for outstanding temperature performance and condensation prevention
• Sophisticated timer function with weekly/daily or real time mode
• Intuitive programmability function for defined temperature ramping, soak/cool and dwell: store up to 10 programs with 10 temperature steps, loop program, and select mode at end of cycle
• Adjustable over-temperature shut-off for protocols that require setting of over temperature for protection (class 2 according to norm DIN12880)
• Fan speed adapts automatically to achieve optimal temperature performance

For incubation and test applications below ambient temperature as well as standard incubation applications at 37°C in warm environments.

• Available in 2 sizes as tabletop or standalone unit
• Standalone unit has lockable casters for easy mobility
• Door with viewing window
• Microprocessor control for precise temperature adjustment
• Timer function
• Temperature alarm, overtemperature shutdown
• Port hole on the right side of the device for inserting monitoring probes or cables
• RS232 data interface for temperature monitoring (software not included in delivery)
• IQ and OQ documentation and qualification service available
• Automatic defrosting
• Overheating protection in fan motor

• Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO₂ parameter is continuously regulated

• Two gas connections with quick release connectors for automatic switch-over of gas cylinders

• Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation. Humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filter

• Control of oxygen concentration by N₂ inlet; adjustment range 1 % up to 20 % O₂;

• Peltier cooling unit, enables a working temperature of 37 °C even at higher ambient temperatures of up to 35 °C

• Further options and accessories, f. ex. special works calibration certificates, subframes, pressure reducing valves on request.

The units are suitable for apptications in the pharmaceutical or life science sector. Optimal incubation conditions due to temperature and humidity control.

• Stainless steel interior and shelves
• Glass door
• Directed horizontal airflow system
• Adjustable defrost timer
• Over- and under-temperature protection
• Refrigerant R-513A