Stands, Fittings

Made of stainless steel 304. For spherical ground joint connections. With set screw.

Made of stainless steel 304. For spherical ground joint connections. With set screw.

Made from natural agglomerated cork which can be easily cleaned. Non-allergenic, anti-fungal, anti-bacterial and antistatic material. Heat and erosion resistant and also reduces noise and vibration.

Prongs with cork.

Malleable cast iron with chrome finish. DIN 12895. 90° and 180° angle with lug screw.

To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.

DIN 12895. For customer designed products and high quantity orders the screw type can be chosen.

Chrome plated cast steel. Suitable for frame works and fixing perpendiculars. Can be moved vertically and horizontally along the rods.

To DIN 12894. B form. Zinc die casting, powder-coated. With round jaws.

Malleable cast iron with lacquered chrome finish. DIN 12895. With lug screw.

Double bosshead malleable iron, epoxy coated.

Chrome plated cast steel with two PVC coated prongs for gently holding the objects. Two seperately adjustable clamps enable perfect control of holding pressure and precise positioning of the objects. Clamps can be opened and closed smoothly with a grip width of 0-50mm.
Available as 2 types:

• with solid stem of 12mm rod diameter, the holding angle and distance from the support rod can be adjusted by a separate bosshead
• with swivel mechanism which enables the object to freely swivel 360° and lockable at any angle. Complete with a integral bosshead, usable for rods maximum diameter of 21mm

Same rod can be placed either at the centre or at the rear of the base offering multi advantages. White base colour guarantees perfect visual observation of colour changes during titration applications.

• Rectangular base made of ABS.
• Delivered complete with a screw-in M10 support rod of 600 mm height

Standard to DIN 12894. With round jaws.

With cork lined jaws, opening 0 to 80mm. Rod diameter 10mm.

Highly stable laboratory stand due to the steel rectangular base which is stove enamel coated. With an M10 threaded hole in the middle of one short side. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".

To DIN 12895. Material number 4301. Electrolytically polished, with heart screw.

Manufactured from chrome plated cast steel with two prongs which are PVC coated for gentle hold of the objects. Two separately adjustable clamps enables perfect control of holding pressure and precise positioning of the objects. Clamps can be opened and closed smoothly with a grip width of 0-70 mm.
Available as 2 types:

• With solid stem of 12 mm rod diameter with the holding angle and distance from the support rod can be adjusted by a separate bosshead
• With swivel mechanism which enables the object freely swivel 360° and lockable at any desired angle. Complete with an integral bosshead usable for rods maximum diameter of 21 mm

Stainless steel, electrolytically polished, for rods up to 16mm diameter. With tommy-bar screws.

18/10 Stainless or zincked. With or without bosshead.

Galvanised steel. With or without M10 thread.

Chrome plated cast alloy with smoothly opening distance of 0 - 20 mm.
Available as 2 types:

• With fix stem that holds the objects on fixed position
• With swivel mechanism which enables the object to freely swivel 360° and lockable at any desired angle

DIN 12894, form A. Die-cast zinc, powder coated. With angular jaws.

Swivelling. To DIN 12895 Part 1. Zinc die casting powder-coated .

18/10 stainless steel.

To DIN 12892. Steel, powder-coated, 8 mm thick. Rubber feet. With an M10 bore hole in the middle of one shorter side.

Zinc die casting, natural alloy, vinyl-coated jaws.

Chain 70cm, silicone coating.

PVC-coated jaws.

With epoxy coating, for 1 burette.

Highly stable laboratory stand due to the steel tripod base which is stove enamel coated. With an M10 threaded hole in the middle. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".

Steel, thickness 10 mm, powdercoated, M 10 threaded, rubber feet

Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".

Steel. With or without bosshead, as outlined below.

For M8 rods.

Swivelling (360°). For M8 rods.

Aluminium, powder-coated. With roller grips and bosshead for retort stand rods.

Lacquered green finish. Prongs with cork.

Zinc die casting, nickel-plated, vinyl-coated jaws.. Rod diameter 10mm.

Zinc die casting, nickel-plated, vinyl-coated jaws, with revolvable sleeve. Stem length 300mm.

4 prong with silicone corered jaws.

With adjustable jaw positioning. Zinc die casting, powder-coated.

Swivel type, silicone coated.

Lacquered steel with green finish, M10 thread hole on one short side, 1 foot adjustable. To DIN 12892. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".

Zinc die casting, nickel-plated, vinyl-coated jaws. Stem length 300mm, with 82mm diameter, heavy, stable base.

Steel, powder-coated. With an M10 bore hole in the middle of one of the shorter sides. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".

DIN 12984. Prongs with cork.

Steel. With or without bosshead, as indicated.

"Automatic". With bosshead 13.5 mm, Aluminium chrome-plated, self-closing. Shaft length 40 mm.

Graduations and meniscus line of the burette are clearly visible. They can be used on support rods of 10 - 12 mm diameter.

For two burettes. With bosshead. Distance between rollers 170mm. PVC rollers.