Labels

The LABSOLUTE® labelling tapes can be used to label test tubes or colour code laboratory utensils. The tapes are easy to label and leave no sticky residue when removed. They are temperature resistant from -23 - 121 °C.

Core diameter 25 mm.

Compilation of the rainbow mix:
7695407: 3 x blue, 3 x green, 3 x orange, 3 x red, 5 x white, 4 x yellow and 3 x pink
7695415: 2 x blue, 2 x green, 2 x orange, 2 x red, 4 x white, 2 x yellow and 2 x pink
7695423: 1 x blue, 2 x green, 1 x orange, 2 x red, 2 x white, 2 x yellow and 2 x pink

LABSOLUTE® labels are self-adhesive and have a size of 26 x 37 mm. They are used to designate your materials using the universally applicable hazard symbols of the GHS system (Globally Harmonized System of classification and labelling of chemicals).

• Made of PE (thickness: 0.1 mm) with additional protective lacquer
• Signal word in three languages (German, English and Danish)
• Waterproof and solvent-resistant
• Available in handy dispenser boxes

The LABSOLUTE® labelling tapes can be used to label test tubes or colour code laboratory utensils. The tapes are easy to label and leave no sticky residue when removed. They are temperature resistant from -23 - 121 °C.

Core diameter 76 mm.

The LABSOLUTE® labelling tape dispensers are ideal for organizing the labelling tapes. Single tapes can be replaced without having to remove all tapes.

The LABSOLUTE® labelling tapes can be used to label test tubes or colour code laboratory utensils. The tapes are easy to label and leave no sticky residue when removed. They are temperature resistant from -23 - 121 °C.

Core diameter of 25 mm.

The LABSOLUTE® labelling tapes can be used from the labelling of test tubes to the colour coding of laboratory utensils. The tapes are easy to label and leave no sticky residue when removed.

Compilation of the rainbow mix:
7695407: 3 x blue, 3 x green, 3 x orange, 3 x red, 5 x white, 4 x yellow und 3 x pink
7695415: 2 x blue, 2 x green, 2 x orange, 2 x red, 4 x white, 2 x yellow und 2 x pink
7695423: 1 x blue, 2 x green, 1 x orange, 2 x red, 2 x white, 2 x yellow und 2 x pink

Dispenser box of 250 labels. These labels are produced using an extremely resistant 100µm PE film. Due to their special surface coating they are resistant to most solvents and excellent for indoor or outdoor use. The strong adhesive, although permanent, can be removed from glass containers without leaving any trace.
Trilingual signal word: German, English, French.
Available in 2 sizes.

Ø 9.5mm. Self-adhesive. Printing protected. For labeling of 0.5 to 2.0ml microtubes that contains potentially hazardous substances. The labels have excellent heat resistance, chemical resistance and UV resistance and a very good adhesion to various materials, even on rough or non-polar surfaces such as on plastics with low surface energy. The material is UL certified. (File MH26760).
1000 labels per roll, in dispensing box.

Crepe paper, adhesive. With indicator. Colour changes according to DIN EN ISO 11140-1. Rolls of 50 m.

Comply indicator tapes are process indicators and the ideal solution for securely sealing a wide variety of sheet packaging. For sterilisation with steam, hydrogen peroxide (H₂O₂) or hot air.

• Clear colour change visible
• Easily readable result
• Direct labelling possible
• No ink transfer to adhesive or other packaging
• Stretchable, reduces the risk of tearing
• Latex free
• Solvent free
• Lead-free

Specially coated plastic tape with adhesive backing. Makes labels of any length. Can be used with any pens. Excellent adhesion to glass, metal, PE, etc. Resistant to humidity, as well as acids and alkali solutions in weak concentrations. Leaves no residue when removed.

tesapack^®4124, transparent.

Temperature resistant from -196 °C to 150 °C. All labels withstand freezer temperatures down to -196 °C (liquid and vapour phase nitrogen), boiling water baths, autoclaving and moderate ovens (150 °C). Chemically inert labels resist most organic solvents and caustic agents. They adhere to most plastics, glass and metals without cracking, peeling or degrading. Made with a flexible, polyolefin label material and acrylic adhesive. This unique combination expands and contracts together with temperature fluctuations resulting in a strong adhesive bond. Convenient dispensing box assists in labeling individual tubes used in small experiments. Easy to write on. PVC labels accept writing from most lab markers including solvent resistant pens.

SOLVENT 50 is a highly effective label solvent for the effortless removal of self adhesive labels on the basis of natural orange terpenes. It works on the adhesive and quickly and gently dissolves adhesive labels on glass, porcelain, metal, wood, foil and cardboard. SOLVENT 50 also removes sticky residue of any kind, such as tar spots or glue residue from stickers. Check compatability when using on plastics. Not suitable for polystyrene.

SOLVENT 50 SUPER ist the label remover with brush and NSF K3-Registration for use in the food industriy. The optimised formula has high dissolving capacity to remove paper labels and all kinds of adhesive residues.

Brady laboratory labels are designed to withstand extreme laboratory environments. The labels are rersistent against high/low temperatures, solvents and chemicals (Alcohol and DMSO).

Temperature resistant from -40°C to 121°C. Tough-Tags resist boiling water baths, autoclaving and moderate freezer temperatures. Chemically inert labels resist most organic solvents and caustic agents. They adhere to most plastics, glass and metals without cracking, peeling and degrading. Tubes are pre-cut, peel-off labels which accept many marking instruments. They are perfectly sized to fit microcentrifuge tubes and other containers in the laboratory. Tubes labeled with Tough-Tags^® easily slide in and out of centrifuge rotors without binding.

Temperature resistant from -196°C to 150°C. All sheets withstand freezer temperatures down to -196°C (liquid and vapor phase nitrogen), boiling water baths (100°C), autoclaving and moderate oven temperatures (150°C). Chemically inert label sheets resist most organic solvents and caustic agents. They adhere to most plastics, glass and metals without cracking, peeling and degrading. Made with a flexible, polyfin label material and acrylic adhesive. This unique combination expands and contracts together with temperature fluctuations resulting in a strong adhesive bond. Label sheets are specially top-coated to readily accept laser printing. Heat-resistant, stay-flat sheets will not jam in laser printers.

Strong, brown tape.

Pre-cut Peel-off round lables for 0.5 and 1.5/2.0ml microcentrifuge tube tops. Temperature resistant from -196 °C to 80 °C. Easy to write on: PVC labels accept writing from most lab markers. Convenient: Dispensing box assists in labeling individual tubes used in small experiments.

Manufactured from colored paper with special resin adhesive that resists to moisture and most solvents. Can be used between -5 to 110 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation. Adheres to any clean surface including PTFE coated surfaces and peels off without leaving any sticky residue. Accepts writing from almost all pen types such as pencil, ball point pen, solvent ink marker etc. Markings remain absolutely legible under the most demanding laboratory conditions.
Supplied as white, color or as pack of 6 different colors matching the universal hazard color codes yellow for chemical reactivity, blue for health hazards, green for safety, red for flammability, orange tape for biohazard and white for general use. Rolls of 30 m.

Manufactured from polypropylene flexible paper with acrylic resin adhesive back. This unique combination does not expand and retract together with temperature fluctuations and therefore always guarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -96 to 121 °C temperature range. Also withstands steam autoclaving cycle and gamma irradiation Adheres to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue.

With brake.

Provides a smooth writing surface, making labeling easy and fast. When marked tape is advanced and cut off on the serrated edge, a fresh length of label tape is positioned on the writing platform. Plastic cutting edge is moulded into the housing. Various widths and colours of tape rolls can be mixed together on the spindles, which accommodates 5 or more 12 to 19mm narrow rolls or 4 x 25mm wide rolls. Spindles are easily removed from the unit for loading and unloading and can be adjusted to hold either 25 or 75mm core diameter rolls.

• Includes three plastic separating discs to assure smooth, snag free dispensing for up to four rolls of tape (additional discs on request).
• Moulded-in pen holder wells on the dispenser help to keep writing instruments handy
• Ideal for use with the full line of Write-On™ Tapes, which are available in 6 colors and 3 widths.
• Includes mounting holes for secure attachment to a benchtop (screws not included). Can also be attached to vertical surfaces using Wall Mount Adapter
• Dimensions (W x D x H): 302 x 143 x 105 mm

Self-adhesive labels for hand lettering or print on printing presses. Mounted true to register on sheets with gripper and feeder margin. Each pack contains 2 extra sheets for setting-up operations. Format of the sheets 168 x 120 mm. Length varies in accordance with label size. The sheet sizes and register, however, are absolutely identical for each type. Not suitable for PC printers.

• Made of wood-free paper (75g/qm)
• Chlorine-free bleached, FSC-certified
• Solvent-free adhesive

High Precision Tweezers Kit, swiss made, high quality finish, anti-magnetic and acid resistant stainless steel in a solid cardboard box with foam insert, including 5 forceps:
120 mm, flat edges, fine tips (1 x 6.266 873)
120 mm, flat, accurate, round tips (1 x 6.266 874)
110 mm, very sharp, fine tips (1 x 6.266 875)
110 mm, extra fine tips (1 x 6.266 876)
115 mm, very fine, 45° curved tips (1 x 6.266 877)

Durable, non-shrinking, plain cloth labels. Ideal for labelling cryoboxes. Supplied in packs of 10 sheets of labels with each sheet containing 20 labels.

Manufactured from polyfiber grade flexible paper with acrylic resin adhesive back. This unique combination expands and retracts together with temperature fluctuations and always guarantees a strong adhesive bond. Chemically inert, resists to water, moisture and most organic solvents and caustic agents. Can be used between -196 to 80 °C temperature range. Sticks to any clean surface including PTFE coated surfaces without cracking, peeling and degrading. Peels off without leaving any sticky residue. Recommended to be used on tube caps with different diameters.
Supplied as white color or pack of 6 different colors matching the universal hazard color codes (yellow for chemical reactivity, blue for health hazards, green for safety, red for flammability, orange tape for biohazard and white for general use).

Self-adhesive deep-freeze labels on A4 sheets. Perfect for all PC printers (laser/inkjet/dot-matrix), copiers and multi-functional machines. Suitable for colour printers and copiers.

• Chlorine-free bleached special paper, PEFC-certified
• Solvent-free adhesive
• Label paper and adhesive are extremely resistant to temperatures (down to -60 °C, Min. adhesive temperature: -25 °C)
• Good adhesive properties at normal temperatures

The DURAN^® TILT Light Shield is a removable white silicone sleeve that covers 94% of the bottle surface. The sleeve blocks damaging ultraviolet light, protects the glass surface from damage, and facilitates safer handling.

The DURAN^® GL 56 Bottle Tags can be used for individual colour coding or for fixing the light shield to the bottle.

DURAN^® bottle top vacuum filtration units for use with the TILT bottle (using an adaptor) or 45 mm media bottles. Manufactured in a Class 100,000 Cleanroom from Class VI non-cytotoxic materials. Supplied sterile.

Re-usable DURAN^® GL 56 filter adaptor allows the use of the TILT bottle with standard 45 mm bottle top filtration units. Manufactured from inert PTFE.

DURAN^® TILT GL 56 self-adhesive cap labels can be used to clearly indicate the separate bottles of media for each cell line, or types of media.

• For one roll Write-On™ adhesive tape
• With epoxy-coated steel writing platform
• Weighted base with non-skid pads prevents sliding or lifting
• 76 mm core fits standard tape rolls up to 25 mm wide and accepts tape rolls having a maximum diameter of 133 mm
• Accepts 36.6 m as well as 54.9 m rolls
• Dimensions (W x D x H): 213 x 87 x 95 mm
• Dimensions of writing platform 102 x 152 mm

Adhesive tape for label protection
Clear polyester tape with special synthetic adhesive. Resistant to moisture and most solvents. Test results prove the tape remains securely affixed with no discoloration after being autoclaved for 40 minutes at 125 ºC, as well as after one week in liquid nitrogen at -196 °C. All tape sizes are 1 mil thick with 1 mil of acrylic adhesive. Excellent adhesion to glass, metal, PE etc. Supplied in rolls as outlined below.

Tape dispenser
Durable tape dispenser is molded of strong ABS plastic with a steel serrated cutting blade; tape roll held in place by aluminum roller and spring-loaded cover. Includes four non-slip rubber feet and screws. Dimensions (L x W x H): 206 x 117 x 60 mm.

For customizing the white Cryo Boxes, the Rainbow Cryo labels are available in modern colors: red, yellow, green, blue, purple.

• Temperature-resistant down to -150 °C
• 50 labels per pack, divided into 5 colors, 10 pieces from each color

The required quantity of glue is dispensed "dot-wise" from a strip, even on difficult surfaces. The adhesive bond can subsequently be loosened easily and rubbed off without leaving any residue. Available in a variety of colours, as outlined below.

The "Globally Harmonized System of Classification and Labelling of Chemicals" (GHS) by the United Nations is the basis for a worldwide unification of existing national systems.

Film (labels on sheets):

• for indoor and outdoor use on smooth surfaces
• water, oil and alkali resistant, permanently adhering
• temperature resistance: -30 to +70°C

Portable label station holds up to six standard size boxes of Tough-Tags^®, Cryo-Babies^®, and Tough-Spots^®. Just drop the box in the label station and feed the paper through the slot.

• Acrylic station includes a writing surface, a cutting edge for easy dispensing and non-skid rubber feet
• Counter-sunk holes provided for wall mounting

Please order printer ribbons separately.

Brady labels for laboratory use are designed to withstand extreme environmental conditions. They are resistant to high/low temperatures, solvents and chemicals such as alcohol and DMSO.

For easy removal of labels from files, appliances and plastic-coated materials. With capillary-tube applicator.

Compatible with:

• Series 360 EP and 360 ES
• Series 490
• Series 320 Moisture analyzers

The "Globally Harmonized System of Classification and Labelling of Chemicals" (GHS) by the United Nations is the basis for a worldwide unification of existing national systems. Film (labels on sheets):

• for indoor and outdoor use on smooth surfaces
• water, oil and alkali resistant, permanent adhesive
• temperature resistance: -40 to +110°C, short term up to +140°C

Ideal for easy marking of imperfect floors, e.g. for traffic guidedance.

• Quick application
• High visibility
• Rubber adhesive for optimal bonding
• UV resistant