Rotary piston pumps

Use:
BUDDE heating bath liquid can be used continuously as a heating medium up to approx. 170 °C. Higher temperatures (below flash point) are possible, but will result in rapid darkening. The low pour point allows the bath liquid also to be used as a cooling medium. Mixtures with 10 % to 30 % water achieve best results.

The crucial advantages of BUDDE heating bath liquid compared to
the oils or other organic liquid mainly used are:

• accidental spillage of water into the bath does not lead to dangerous spitting at temperatures over 100 °C, as the water dissolves in the heating bath liquid and subsequently evaporates safely
• BUDDE heating bath liquid can easily be rinsed away with water which eases cleaning of laboratory equipment, e.g. distillation flasks, and also bench or floor if the bath liquid is accidentally spilled.
• BUDDE heating bath liquid does not foam when mixed with water.

Viscosity on addition of water:
BUDDE heating bath liquid is quite viscous at ambient or low temperatures, and therefore sometimes difficult to dispense. The addition of 10-20 % water reduces the viscosity and enables easier handling. If the mixture is then heated to 100 °C, the water evaporates without boiling. Further heating is only shortly delayed by this. Before next heating, water can be added again.

Water solubility: BUDDE heating bath liquid can be mixed with water in any ratio. The hardness of the water has no effect on the bath liquid.

Chemical character:	Modified polyglycolether
Appearance:	Clear, colourless or lightly yellowish liquid
Storage time:	When stored for long periods (over 2 years) the product may become darker. This does not affect the performance of the product.
Water solubility:	Heating bath liquid BUDDE can be mixed with water in any ratio.
pH value (DIN ISO 976) :	6-8 (100 g/l, 20 °C)
Solidification temperature (DIN ISO 3016):	approx. -39 °C
Boiling point:	200 °C
Density (DIN 51757, 23 °C):	approx. 1.13 g/cm³ to 1.17 g/cm³
Flashpoint (DIN EN ISO 2592):	> 290 °C
Ignition temperature (DIN 51794):	approx. 390 °C

Alternative Heating bath liquid

Combinations of immersion circulators and insulated refrigeration baths are low-cost solutions for direct thermoregulation within the temperature range -20/-30°C to +200°C. The refrigeration baths operate with natural refrigerants. A pump adapter (optional) can be fitted for thermoregulation of externally closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore suitable for external open thermoregulation applications. The temperature stability is 0.02K for the Compatible Control models and 0.05K for the KISS models.

Alternative Thermostatic baths with polycarbonate tanks Alternative Compatible Control Refrigeration Circulators K6

• Available as hand or motor lift
• Clear digital display for monitoring the current values and separate button to display the set values
• Two separate operating knobs for adjusting the rotation speed and heating temperature with LED ring light system for activity indication
• Activated lock feature prevents inadvertent adjustments
• Residual heat indicator when >50 °C
• Standby button stops all functions and lifts the evaporator flask out of the heating bath on motor lift models
• Ergonomically optimized heating bath handles sit securely in your hand
• Easily adjust immersion depth up to 155 mm and the tilt angle of the evaporating flask from 20° to 80°
• Grease-free operation thanks to innovative sealing technology
• Ventilation cap with PTFE inlet and free of ground joints. Optionally available with replenishment valve
• Optional cable extension. The operating panel can be detached for use outside closed fume hoods

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask. Supplied condensor as indicated.

Specifications Drive
Speed range:	10 ... 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient ... 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Accessories Accessories for Rotary Evaporators Hei-VAP Core Accessories Accessories for Rotary Evaporators Hei-VAP Series Accessories Distilling Spiders for Rotary Evaporators Hei-VAP series Accessories Evaporator flasks for Rotary Evaporators Hei-VAP Series Accessories  Accessories Circulating Coolers Hei-CHILL 250 / 350 Accessories  Accessories Heating bath liquid Accessories Circulating Coolers Hei-CHILL 600 / 1200 Accessories Spare Vapor tube for Rotary Evaporators Hei-VAP Series Alternative Rotary Evaporators Hei-VAP Core, with motor lift Alternative Rotary Evaporators Hei-VAP Core Packages Alternative Large-scale Rotary Evaporators Hei-VAP Industrial

• Available as hand or motor lift
• Clear digital display for monitoring the current values and separate button to display the set values
• Two separate operating knobs for adjusting the rotation speed and heating temperature with LED ring light system for activity indication
• Activated lock feature prevents inadvertent adjustments
• Residual heat indicator when >50 °C
• Standby button stops all functions and lifts the evaporator flask out of the heating bath on motor lift models
• Ergonomically optimized heating bath handles sit securely in your hand
• Easily adjust immersion depth up to 155 mm and the tilt angle of the evaporating flask from 20° to 80°
• Grease-free operation thanks to innovative sealing technology
• Ventilation cap with PTFE inlet and free of ground joints. Optionally available with replenishment valve
• Optional cable extension. The operating panel can be detached for use outside closed fume hoods

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask. Supplied condensor as indicated.

Specifications Drive
Speed range:	10 ... 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient ... 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Accessories Accessories for Rotary Evaporators Hei-VAP Core Accessories Accessories for Rotary Evaporators Hei-VAP Series Accessories Distilling Spiders for Rotary Evaporators Hei-VAP series Accessories Evaporator flasks for Rotary Evaporators Hei-VAP Series Accessories  Accessories Circulating Coolers Hei-CHILL 250 / 350 Accessories  Accessories Heating bath liquid Accessories Circulating Coolers Hei-CHILL 600 / 1200 Accessories Spare Vapor tube for Rotary Evaporators Hei-VAP Series Alternative Rotary Evaporators Hei-VAP Core, with hand lift Alternative Rotary Evaporators Hei-VAP Core Packages Alternative Large-scale Rotary Evaporators Hei-VAP Industrial

The new RV 3 is the ideal entry-level model of the IKA rotary evaporator portfolio. Thanks to specially designed glass guides, the vertical condenser makes extremely efficient use of the 1500 cm² cooling surface.

• 4L water heating bath with digital temperature display and carrying handles
• Mechanical lift end-point safety stop
• Locking mechanism: red indicator shows unlocked position of the vapor tube
• Manual lift for precise positioning of the glassware, single-handed, suitable for left and right-handed operators
• Adjustable immersion angle
• Stepless speed setting with dial control and speed display
• Flask clamping mechanism with integrated push-off function for easy exchange of evaporation flasks

Scope of supply:
RV 3 V: Rotary Evaporator RV 3 eco, Heating bath HB eco, vertical glassware RV 10.1
RV 3 V-C: Rotary Evaporator RV 3 eco, Heating bath HB eco, vertical coated glassware RV 10.10

Specifications
Speed range:	20 ... 300 rpm
Stroke displacement:	150 mm
Bath volume:	4 L
Temperature range:	ambient ... 90 °C
Heating power:	1400 W
Permissible ambient temperature:	5 ... 40 °C
Permissible relative humidity:	80 %
Dimensions (W x D x H):	440 x 330 x 530 mm
Weight:	13.5 kg
Protection class according to DIN EN 60529:	IP 20
Power supply:	100 ... 240 V / 50/60 Hz

Alternative Rotary Evaporator RV 3 FLEX

The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The vertical condenser unit has special designed glass tubes that utilize the 1500 cm² surface extremely efficient. That's why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting, complete the line of safety features. Furthermore, IKA offers a choice of coated glassware for increased safety needs. The RS 232 interface allows for remote control via IKAs "labworldsoft". The Heating bath is controlled via the IR interface from the main unit.

• Universal water/oil heating bath
• Motorized lift with "safety-stop" function
• RS 232 and IR Interface
• Optimized heating bath volume for fast heat-up
• Highly efficient 1500 cm² condenser unit
• Ergonomically placed handles on Heating bath
• Left-right interval
• Timer function
• Dry-run protection
• Safety temperature circuits
• Lower-end stop
• Push-off mechanism to loosen tight fitted glassware
• Easy and safe operation due to ergonomical design of the user interface

Scope of supply:
RV 10 digital V: Rotary evaporator RV 10 digital, heating bath HB digital, vertical glassware RV 10.1, vapor tube RV 10.70
RV 10 digital V-C: Rotary evaporator RV 10 digital, heating bath HB digital, vertical glassware, coated RV 10.10, vapor tube RV 10.70
RV 10 digital V FLEX: Rotary evaporator RV 10 digital, heating bath HB digital, Woulf bottle, spherical joint clip RV 05.10, clamp, NS 29 RV 10.88, vapor tube RV 10.70

Specifications
Drive
Motor rating input:	50W
Speed range:	20 to 280 rpm
Speed display:	digital
Head angle adjustable:	0 to 45°
Stroke displacement:	140mm, motorised
Setting of lower end stop:	60mm, contact-free
Heating bath
Temperature range:	Ambient up to 180°C
Heating power:	1,300W
General data
Dimensions (W x D x H):	500 x 430 x 410 mm
Protection class acc. to DIN EN 60529:	IP 20
Power supply:	220-240V / 50/60Hz

Accessories Accessories for Rotary evaporators RV 8 / RV 10 digital / RV 10 control

The rotary evaporator RV 10 auto has a bright, high-contrast, TFT, color-graphic control panel, an integrated vacuum controller and a cooling water monitoring. Additional safety for users is provided by individually adjustable temperature safety circuits, protection against boiling dry, adjustable end-point recognition to prevent glass breakage, and a locking function. The USB port or the RS-232 interface enable remote control with the IKA "labworldsoft" software package and an update option with the firmware update tool. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface.

The Rotary evaporator RV 10 auto pro rotary evaporator is fitted with the full-automatic vacuum pump VACSTAR digital. This enables better automatic detection of the solvent boiling point. The Vacstar digital is controlled directly from the drive unit of the RV 10 auto via the data cable provided.

• Integrated solvent library with 40 preset solvents and expansion option
• Optimized heating bath volume for rapid achievement of working temperature
• Programming option for up to ten individual procedures
• Smooth start
• Right or left rotation
• Timer function
• Coated flask and condenser as an option
• Automatic vacuum management
• Motorized lift with "safety-stop" function

Scope of supply:
Model RV 10 auto: Rotary Evaporator RV 10 auto with Heating bath HB 10, Magnetic valve RV 10.4002 and Woulff bottle
RV 10 auto V: with vertical glassware RV 10.1
RV 10 auto V-C: with vertical coated glassware RV 10.10
RV 10 auto FLEX: without glassware

Model RV 10 auto pro: Vertical Rotary Evaporator RV 10 auto with Heating bath HB 10, Vacuum pump VACSTAR digital and Woulff bottle
RV 10 auto pro V: with vertical glassware RV 10.1
RV 10 auto pro V-C: with vertical coated glassware RV 10.10
RV 10 auto pro FLEX: without glassware

Specifications Drive
Speed range:	5 ... 300 rpm
Speed display:	digital
Stroke displacement:	140 mm
Heating bath
Bath volume:	4 l
Temperature range:	ambient ... +180 °C
Power input: Power input standby:	100 W 3,3 W
General data
Dimensions (W x D x H):	500 x 410 x 430 mm
Weight:	18,6 kg
Protection class according to DIN EN 60529:	IP 20
Power supply:	100 ... 240 V / 50/60 Hz

Alternative Rotary evaporator package RV 10 auto pro V-C Complete

Digital displays for speed and heating bath temperature allow for optimal control of all distilling processes. Thanks to specially designed glass guides, the condenser makes extremely efficient use of the 1500 cm² cooling surface.

• Clearly visible glass display (black and white)
• Locking mechanism: red display for unlocked state of vapor tube
• Manual lift for precise positioning of glassware
• Water/oil heating bath with integrated ergonomic carrying handles
• Lock function for the heating bath temperature
• Adjustable immersion angle
• Single-hand operation; ambidextrous design
• Easy exchange of evaporation flasks by clamp mechanism with push-out function
• Woulff bottle

Scope of supply:
RV 8 V: Rotary Evaporator RV 8, Heating bath HB digital, vertical glassware RV 10.1
RV 8 V-C: Rotary Evaporator RV 8, Heating bath HB digital, vertical coated glassware RV 10.10
RV 8 FLEX: Rotary Evaporator RV 8, Heating bath HB digital, clamps for glassware

Drive
Speed:	5 to 300rpm
Speed display:	digital
Stroke displacement:	120mm, manual
Heating bath
Bath volume:	4 l
Temperature range:	RT to +180°C
Heating power:	1300W
General data
Dimensions (W x D x H):	510 x 345 x 490mm
Protection class according to DIN EN 60529:	IP 20
Power supply	100-240V, 50/60Hz

Accessories Accessories for Rotary evaporators RV 8 / RV 10 digital / RV 10 control

The Rotavapor^® R-100 can be completed to a rotary evaporator system including a vacuum pump, interface and recirculating chiller. The Vacuum Pump V-100 and Recirculating Chiller F-105 are ON/OFF regulated by the Interface I-100. Heating bath, glass assembly and coating are similar to the Rotavapor^® R-100.

Interface
I-100, with Woulff bottle. Operation by function keys. Two operating modes (manual, timer), display of set and actual pressure. ON/OFF regulation of Vacuum Pump V-100 and Recirculating Chiller F-105.

Vacuum Pump
V-100 is a chemically resistant PTFE diaphragm vacuum pump. Final vacuum: 10 mbar (±2 mbar). Suction capacity: 1.5 m³/h. ON/OFF regulation.

Recirculating Chiller
Option: F-100. Ecological recirculating chiller. Cooling capacity: 300 W at 10 °C. Fix temperature: 10 °C.
Option: F-105. Ecological recirculating chiller. Cooling capacity: 500 W at 15 °C. Temperature range: -10 °C to +25 °C. Rotation knob for set temperature in steps of 1 °C. In combination with Interface I-100: ON/OFF regulation.
Heating bath B-100, manual lift, Interface I-100, vacuum pump V-100.

The Rotavapor^® R-100 can be completed to a rotary evaporator system including a vacuum pump, interface and recirculating chiller. The Vacuum Pump V-100 and Recirculating Chiller F-105 are ON/OFF regulated by the Interface I-100. Heating bath, glass assembly and coating are similar to the Rotavapor^® R-100.

Interface
I-100, with Woulff bottle. Operation by function keys. Two operating modes (manual, timer), display of set and actual pressure. ON/OFF regulation of Vacuum Pump V-100 and Recirculating Chiller F-105.

Vacuum Pump
V-100 is a chemically resistant PTFE diaphragm vacuum pump. Final vacuum: 10 mbar (±2 mbar). Suction capacity: 1.5 m³/h. ON/OFF regulation.

Recirculating Chiller
Option: F-100. Ecological recirculating chiller. Cooling capacity: 300 W at 10 °C. Fix temperature: 10 °C.
Option: F-105. Ecological recirculating chiller. Cooling capacity: 500 W at 15 °C. Temperature range: -10 °C to +25 °C. Rotation knob for set temperature in steps of 1 °C. In combination with Interface I-100: ON/OFF regulation.
Heating bath B-100, manual lift, Interface I-100, vacuum pump V-100, recirculating chiller F-105.

The Rotavapor^® R-100 is a high-quality rotary evaporator to meet the essential needs in classical laboratory applications. It is capable of a manually adjusting the rotation speed from 20 to 280 rpm and is equipped with an action jack lift for manual lifting of the evaporating flask.

Heating Bath B-100
Temperature range of 20 °C to 95 °C. Max. evaporating flask size: 4000 mL (3 kg). Digital display of set and actual temperature (alternating).

Standard Joint
SJ 29/32

Glass Assembly
Option V: Vertical condenser(V): Vertical condenser used along with a recirculating chiller or tab water.
Option C: Cold trap (C): Cold trap used for low boiling solvents along with e.g. dry ice for cooling.

Protective Coating
Option 1: Without coating
Option 2: Transparent PLASTIC+GLAS (P+G) safety coating. Protect against mechanical damage. In the event of breakage there is no loss of sample.
Heating bath B-100, manual lift.

Every Rotary Evaporator Rotavapor^® R-300 will be delivered with a transparent PLASTIC+GLAS (P+G) safety coating, a vertical glass assembly (V), NS29/32, and a vacuum pump V-300. Interface, heating bath and recirculating chiller could be chosen from the options below.

Interface
Option S: I-300, with VacuBox, Woulff bottle. Operation by navigation knob and function keys. Wide range of operating modes (manual, timer, solvent library, automatic distillation, drying). Compatible with BUCHI Rotavapor App for mobile push notifications and remote monitoring.
Option P: I-300 Pro, with VacuBox, Woulff bottle. Operation by touch screen or navigation knob. Wide range of operating modes (methods, manual, timer, solvent library, automatic distillation, drying). Charting and recording possibilities (on SD card). Compatible with BUCHI Rotavapor App for mobile push notifications and remote monitoring (including charting).

Vacuum pump
V-300 (1.8m³/h, 5mbar) is a chemically resistant PTFE diaphragm vacuum pump with transparent front panel to observe the membrane for highest distillation efficiency. Final vacuum: 5 mbar (±2 mbar). Suction capacity: 1.8 m³/h. Speed-controlled operation.

Recirculating chiller F-305
Ecological recirculating chiller. Cooling capacity: 550 W at 15 °C. Temperature range: - 10 °C to +25 °C. Rotation knob for set temperature in steps of 0.1 °C. Lock of cooling temperature. In combination with Interfaces I-300 / I-300 Pro: Temperature setting/monitoring via interface, energy-saving eco-mode and automatic ON/OFF.

Heating Bath
Option 1: B-301. Temperature range of 20 °C to 95 °C (water). Max. evaporating flasks size: 1000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature. Fast heat up time.
Option 2: B-305. Temperature range of 20 °C to 220 °C. Max. evaporating flasks size: 5000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature.

Every Rotary Evaporator Rotavapor^® R-300 will be delivered with a transparent PLASTIC+GLAS (P+G) safety coating, a vertical glass assembly (V), NS29/32, and a vacuum pump V-300. Interface, heating bath and recirculating chiller could be chosen from the options below.

Interface
Option S: I-300, with VacuBox, Woulff bottle. Operation by navigation knob and function keys. Wide range of operating modes (manual, timer, solvent library, automatic distillation, drying). Compatible with BUCHI Rotavapor App for mobile push notifications and remote monitoring.
Option P: I-300 Pro, with VacuBox, Woulff bottle. Operation by touch screen or navigation knob. Wide range of operating modes (methods, manual, timer, solvent library, automatic distillation, drying). Charting and recording possibilities (on SD card). Compatible with BUCHI Rotavapor App for mobile push notifications and remote monitoring (including charting).

Vacuum pump
V-300 (1.8m³/h, 5mbar) is a chemically resistant PTFE diaphragm vacuum pump with transparent front panel to observe the membrane for highest distillation efficiency. Final vacuum: 5 mbar (±2 mbar). Suction capacity: 1.8 m³/h. Speed-controlled operation.

Recirculating chiller F-305
Ecological recirculating chiller. Cooling capacity: 550 W at 15 °C. Temperature range: - 10 °C to +25 °C. Rotation knob for set temperature in steps of 0.1 °C. Lock of cooling temperature. In combination with Interfaces I-300 / I-300 Pro: Temperature setting/monitoring via interface, energy-saving eco-mode and automatic ON/OFF.

Heating Bath
Option 1: B-301. Temperature range of 20 °C to 95 °C (water). Max. evaporating flasks size: 1000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature. Fast heat up time.
Option 2: B-305. Temperature range of 20 °C to 220 °C. Max. evaporating flasks size: 5000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature.

Every Rotary Evaporator Rotavapor^® R-300 will be delivered with a transparent PLASTIC+GLAS (P+G) safety coating, a vertical glass assembly (V), NS29/32, and a vacuum pump V-300. Interface, heating bath and recirculating chiller could be chosen from the options below.

Interface
Option S: I-300, with VacuBox, Woulff bottle. Operation by navigation knob and function keys. Wide range of operating modes (manual, timer, solvent library, automatic distillation, drying). Compatible with BUCHI Rotavapor App for mobile push notifications and remote monitoring.
Option P: I-300 Pro, with VacuBox, Woulff bottle. Operation by touch screen or navigation knob. Wide range of operating modes (methods, manual, timer, solvent library, automatic distillation, drying). Charting and recording possibilities (on SD card). Compatible with BUCHI Rotavapor App for mobile push notifications and remote monitoring (including charting).

Vacuum pump
V-300 (1.8m³/h, 5mbar) is a chemically resistant PTFE diaphragm vacuum pump with transparent front panel to observe the membrane for highest distillation efficiency. Final vacuum: 5 mbar (±2 mbar). Suction capacity: 1.8 m³/h. Speed-controlled operation.

Recirculating chiller F-305
Ecological recirculating chiller. Cooling capacity: 550 W at 15 °C. Temperature range: - 10 °C to +25 °C. Rotation knob for set temperature in steps of 0.1 °C. Lock of cooling temperature. In combination with Interfaces I-300 / I-300 Pro: Temperature setting/monitoring via interface, energy-saving eco-mode and automatic ON/OFF.

Heating Bath
Option 1: B-301. Temperature range of 20 °C to 95 °C (water). Max. evaporating flasks size: 1000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature. Fast heat up time.
Option 2: B-305. Temperature range of 20 °C to 220 °C. Max. evaporating flasks size: 5000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature.

Every Rotary Evaporator Rotavapor^® R-300 will be delivered with a transparent PLASTIC+GLAS (P+G) safety coating, a vertical glass assembly (V), NS29/32, and a vacuum pump V-300. Interface, heating bath and recirculating chiller could be chosen from the options below.

Interface
Option S: I-300, with VacuBox, Woulff bottle. Operation by navigation knob and function keys. Wide range of operating modes (manual, timer, solvent library, automatic distillation, drying). Compatible with BUCHI Rotavapor App for mobile push notifications and remote monitoring.
Option P: I-300 Pro, with VacuBox, Woulff bottle. Operation by touch screen or navigation knob. Wide range of operating modes (methods, manual, timer, solvent library, automatic distillation, drying). Charting and recording possibilities (on SD card). Compatible with BUCHI Rotavapor App for mobile push notifications and remote monitoring (including charting).

Vacuum pump
V-300 (1.8m³/h, 5mbar) is a chemically resistant PTFE diaphragm vacuum pump with transparent front panel to observe the membrane for highest distillation efficiency. Final vacuum: 5 mbar (±2 mbar). Suction capacity: 1.8 m³/h. Speed-controlled operation.

Recirculating chiller F-305
Ecological recirculating chiller. Cooling capacity: 550 W at 15 °C. Temperature range: - 10 °C to +25 °C. Rotation knob for set temperature in steps of 0.1 °C. Lock of cooling temperature. In combination with Interfaces I-300 / I-300 Pro: Temperature setting/monitoring via interface, energy-saving eco-mode and automatic ON/OFF.

Heating Bath
Option 1: B-301. Temperature range of 20 °C to 95 °C (water). Max. evaporating flasks size: 1000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature. Fast heat up time.
Option 2: B-305. Temperature range of 20 °C to 220 °C. Max. evaporating flasks size: 5000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature.

The rotary evaporator R-300 meets the highest needs in convenience, productivity and versatility. The rotation speed, heating temperature and lift position is shown digitally on the integrated display. Automatic change of the direction of rotation programmable.

Lift System
Option 1: Manual lift
Option 2: Electronic lift

Heating Bath
Option 1: B-301. Temperature range of 20 °C to 95 °C (water). Max. evaporating flask size: 1000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature. Fast heat up time.
Option 2: B-305. Temperature range of 20 °C to 220 °C. Max. evaporating flask size: 5000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature.

Standard Joint
SJ 29/32

Glass Assembly
Option V: Vertical condenser (V): Vertical condenser used along with a recirculating chiller or tap water.
Option C: Cold trap (C): Cold trap used for low boiling solvents along with e.g. dry ice for cooling.
Other glass assembly configuration on request

Protective Coating
Option: Transparent PLASTIC+GLASS (P+G) safety coating. Protect against mechanical damage. In the event of breakage there is no loss of sample.

The rotary evaporator R-300 meets the highest needs in convenience, productivity and versatility. The rotation speed, heating temperature and lift position is shown digitally on the integrated display. Automatic change of the direction of rotation programmable.

Lift System
Option 1: Manual lift
Option 2: Electronic lift

Heating Bath
Option 1: B-301. Temperature range of 20 °C to 95 °C (water). Max. evaporating flask size: 1000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature. Fast heat up time.
Option 2: B-305. Temperature range of 20 °C to 220 °C. Max. evaporating flask size: 5000 mL (3 kg). Cordless connection. Digital display of set and actual temperature, rotation speed, lift position. Lock of heating temperature.

Standard Joint
SJ 29/32

Glass Assembly
Option V: Vertical condenser (V): Vertical condenser used along with a recirculating chiller or tap water.
Option C: Cold trap (C): Cold trap used for low boiling solvents along with e.g. dry ice for cooling.
Other glass assembly configuration on request

Protective Coating
Option: Transparent PLASTIC+GLASS (P+G) safety coating. Protect against mechanical damage. In the event of breakage there is no loss of sample.

Alternative Heating bath liquid, BUDDE

Powerful 700 watt cooling for every evaporation process and large volumes. High performance for achieving the target temperature quickly and for keeping high temperature stability even when using high-polar solvents.

• With natural refrigerant (R-290)
• Efficient cooling system with low-energy fans
• Touchscreen controller with glass surface and integrated level indicator
• Low noise level due to speed-controlled fans
• RS-232 interface
• Controlled e.g. via Hei-VAP Expert Control, Ultimate Control or via Heidolph laboratory software solutions

Alternative Chiller Hei-Chill 400 Pro Alternative Chiller Hei-Chill 1100 Pro

The cold trap with air-cooled refrigerating unit has been specially developed to offer highly efficient solvent recovery in laboratory conditions. It can be connected to rotary evaporators or any other application requiring low temperatures for solvent recovery.

• Direct, rapid cooling
• Bright, large OLED display
• Simple operation with menu navigation
• Simultaneous display of set point, internal temperature, T_min and T_max
• USB and RS232 interfaces
• Autostart function for power failure
• Natural refrigerant R290

Scope of supply: Cold trap CT50 Single OLÉ, drip tray

Temperature range:	-50 ... 50 °C
Dimensions probe (Ø x L):	48 x 223 mm
Dimensions (W x D x H):	330 x 450 x 576 mm
Weight:	32 kg
IP code:	IP 20
Power supply:	220 ... 240 V, 50/60 Hz

Accessories Accessories for Cold trap CT50 Single OLÉ

The rotary evaporator RE-100D is suitable for all distillation tasks. The motorized lift is equipped with a safety function that automatically lifts the flask out of the heating bath in case of power failure. LCD display shows temperature, speed and time.

• Final position recognition
• Push-off mechanism
• Timer function
• Interval operation left/right
• USB interface
• Vertical condenser. Coated condenser as option

Scope of supply: Rotary evaporator, vertical condenser

Specifications
Speed range:	20 ... 280 rpm
Stroke displacement:	150 mm
Timer:	1 ... 999 min.
Bath volume:	5 l
Temperature range:	Amb. + 5 °C ... 180 °C
Accuracy temperature:	±1 °C
Heating power:	1300 W
Cooling surface:	1500 cm2
Permissible ambient temperature:	5 ... 40 °C
Permissible relative humidity:	80 %
Dimension (W x D x H):	450 x 600 x 820 mm
Weight:	19 kg
IP code:	IP 20
Power supply:	100 ... 240 V, 50/60 Hz

With NS 29/32, evaporator flask 50 ml with NS 14.5 incl. adapter.

Glass accessory set consists of: glass trap body, 3 way vakuum stopcock adapter, receiving flask (1 l), quick release clamp 100 mm, O-ring DN 100.

Glass adapter: 50 mm flange to GL 14

University Research: Hei-VAP Ultimate Control with motor lift and vertical glassware set G3 XL, vacuum pump Rotavac Vario Control, tubing set
Twin VAP: 2 x Hei-VAP Expert Control with motor lift and vertical glassware set G3, vacuum pump Rotavac Valve Control, 2 x vacuum valve, chiller Hei-CHILL 1200, 2 x tubing set, thermal fluid Kryo 30 (20 l), 2 x no return valve, 2 x Y-piece
Reaction/Extraction: Hei-VAP Expert Control with motor lift and vertical reflux condenser G6, vacuum pump Rotavac Vario Tec, vapour temperature sensor, tubing set
Powder Drying: Hei-VAP Expert Control with motor lift and vertical glassware set G3, vacuum pump Rotavac Valve Control, vacuum valve, Tube-Set, powder flask 2 l, vapour tube with powder filter
Automatic Evaporation: Hei-VAP Expert Control with motor lift and vertical glassware set G3, vacuum pump Rotavac Vario Tec, condenser for Rotavac Vario, tubing set, Woulff bottle, AUTO_accurate sensor
University Research-Chill: Hei-VAP Ultimate Control with motor lift and vertical glassware set G3 XL, vacuum pump Rotavac Vario Control, chiller Hei-CHILL 600, RS 232 cable, tubing set, thermal fluid Kryo 30 (10 l)
Reaction/Extraction-Chill: Hei-VAP Expert Control with motor lift and vertical reflux condenser G6, vacuum pump Rotavac Vario Tec, vapour temperature sensor, chiller Hei-CHILL 350, RS 232 cable, tubing set, thermal fluid Kryo 30 (10 l)
Powder Drying-Chill: Hei-VAP Expert Control with motor lift and vertical glassware set G3, vacuum pump Rotavac Valve Control, vacuum valve, chiller Hei-CHILL 600, RS 232 cable, tubing set, powder flask 2 l, vapour tube with powder filter, thermal fluid Kryo 30 (10 l)
Automatic Evaporation Plus: Hei-VAP Expert Control with motor lift and vertical glassware set G3B, vacuum pump Rotavac Vario Control, condenser for Rotavac Vario, tubing set, Woulff botttle, AUTO_accurate sensor

• Available as hand or motor lift
• Clear digital display for monitoring the current values and separate button to display the set values
• Two separate operating knobs for adjusting the rotation speed and heating temperature with LED ring light system for activity indication
• Activated lock feature prevents inadvertent adjustments
• Residual heat indicator when >50 °C
• Standby button stops all functions and lifts the evaporator flask out of the heating bath on motor lift models
• Ergonomically optimized heating bath handles sit securely in your hand
• Easily adjust immersion depth up to 155 mm and the tilt angle of the evaporating flask from 20° to 80°
• Grease-free operation thanks to innovative sealing technology
• Ventilation cap with PTFE inlet and free of ground joints. Optionally available with replenishment valve
• Optional cable extension. The operating panel can be detached for use outside closed fume hoods

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask. Supplied condensor as indicated.
Hei-VAP Core Basic: Hei-VAP Core with hand lift and vertical glassware set G3, manual Vacuum controller, Vakuum pump Rotavac Valve Tec, Tube-Set
Hei-VAP Core Allround: Hei-VAP Core with hand lift and vertical glassware set G3, Vacuum controller Hei-VAC Control, Vacuum pump Rotavac Valve Tec, Tube-Set
Hei-VAP Core Allround Chill: Hei-VAP Core with hand lift and vertical glassware set G3, Vacuum controller Hei-VAC Control, Vacuum pump Rotavac Valve Tec, Tube-Set, Chiller Hei-CHILL 250, Thermal fluid Kyro 30 (10 l)
Hei-VAP Core University Academic: Hei-VAP Core with hand lift and vertical glassware set G1, manual Vacuum controller, Vakuum pump Rotavac Valve Tec, Tube-Set
Hei-VAP Core University Academic-Chill: Hei-VAP Core with hand lift and vertical glassware set G1, manual Vacuum controller, Vakuum pump Rotavac Valve Tec, Tube-Set, Chiller Hei-CHILL 250, Thermal fluid Kyro 30 (10 l)
Hei-VAP Core Low Bolling / Dry Ice: Hei-VAP Core with motor lift and cold trap G5B, manual Vacuum controller, Vakuum pump Rotavac Valve Tec, Tube-Set

Specifications Drive
Speed range:	10 ... 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient ... 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Accessories Accessories for Rotary Evaporators Hei-VAP Core Accessories Accessories for Rotary Evaporators Hei-VAP Series Accessories Distilling Spiders for Rotary Evaporators Hei-VAP series Accessories Evaporator flasks for Rotary Evaporators Hei-VAP Series Accessories  Accessories Circulating Coolers Hei-CHILL 250 / 350 Accessories  Accessories Heating bath liquid Accessories Circulating Coolers Hei-CHILL 600 / 1200 Accessories Spare Vapor tube for Rotary Evaporators Hei-VAP Series Alternative Rotary Evaporators Hei-VAP Core, with hand lift Alternative Rotary Evaporators Hei-VAP Core, with motor lift Alternative Large-scale Rotary Evaporators Hei-VAP Industrial

Hei-VAP Expert Control and Ultimate Control are central control units for regulation of all process parameter: vacuum, cooling temperature, rotation and heating bath temperature.

• Available as hand or motor lift
• 5'' touch display at Hei-VAP Expert Control and 7'' at Hei-VAP Ultimate Control for controlling the entire system including the vacuum and the cooling temperature
• For precise monitoring, the pictogram on the-display also symbolizes active functions
• Separate knobs for quick access: the right one for direct vacuum control, the left one for the rotation
• Setting of values either via the touch display or the separate quick access knobs
• Direct access to two favorites on the start screen
• Expandable solvent library: user defined favorites can be transfered to other devices using a USB stick
• User defined evaporation processes (ramps) can be defined and saved
• Automatic evaporation with the Dynamic AUTOaccurate Program (DAA)
• USB and Micro SD interfaces, Hei-VAP Ultimate Control additionally with LAN- / RS 232 interface (Lab 4.0-ready)

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask, Control-Box. Supplied condensor as indicated.

Specifications Drive
Speed range:	10 - 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient - 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Alternative Rotary Evaporators Hei-VAP Expert Control, with motor lift Alternative Rotary Evaporators Hei-VAP Expert, with hand lift Alternative Rotary Evaporators Hei-VAP Expert, with motor lift Alternative Rotary Evaporators Hei-VAP Ultimate Control, with hand lift Alternative Rotary Evaporators Hei-VAP Ultimate Control, with motor lift

Hei-VAP Expert Control and Ultimate Control are central control units for regulation of all process parameter: vacuum, cooling temperature, rotation and heating bath temperature.

• Available as hand or motor lift
• 5'' touch display at Hei-VAP Expert Control and 7'' at Hei-VAP Ultimate Control for controlling the entire system including the vacuum and the cooling temperature
• For precise monitoring, the pictogram on the-display also symbolizes active functions
• Separate knobs for quick access: the right one for direct vacuum control, the left one for the rotation
• Setting of values either via the touch display or the separate quick access knobs
• Direct access to two favorites on the start screen
• Expandable solvent library: user defined favorites can be transfered to other devices using a USB stick
• User defined evaporation processes (ramps) can be defined and saved
• Automatic evaporation with the Dynamic AUTOaccurate Program (DAA)
• USB and Micro SD interfaces, Hei-VAP Ultimate Control additionally with LAN- / RS 232 interface (Lab 4.0-ready)

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask, Control-Box. Supplied condensor as indicated.

Specifications Drive
Speed range:	10 - 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient - 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Alternative Rotary Evaporators Hei-VAP Expert Control, with hand lift Alternative Rotary Evaporators Hei-VAP Expert, with hand lift Alternative Rotary Evaporators Hei-VAP Expert, with motor lift Alternative Rotary Evaporators Hei-VAP Ultimate Control, with hand lift Alternative Rotary Evaporators Hei-VAP Ultimate Control, with motor lift

With the clear 5'' or 7'' touch display all values are easy to read. Without vacuum control. For integration into an existing vacuum system or for configuration with optional vacuum controller.

• Available as hand or motor lift
• Central operating panel with 5'' touch display at the Hei-VAP Expert and 7'' touch display at the Hei-VAP Ultimate
• Clear display of all values (Basic and Advanced modes)
• With timer, limitation of max. temperature, multilingual menu and text display for error messages
• Separate knobs for rotation and heating with locking function to prevent accidental readjusting
• LED ring lights and pictogram to display the activity even from a distance
• Integrated solvent library to facilitate adjustment of the required vacuum on an external vacuum controller
• USB and Micro SD interfaces Hei-VAP Ultimate additionally with LAN- / RS 232 interface (Lab 4.0-ready)
• Optional display of vapor temperature

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask. Supplied condensor as indicated.
-With 5'' touch display

• USB and micro SD interfaces

Specifications Drive
Speed range:	10 ... 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient ... 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Alternative Rotary Evaporators Hei-VAP Expert, with motor lift Alternative Rotary Evaporators Hei-VAP Expert Control, with hand lift Alternative Rotary Evaporators Hei-VAP Expert Control, with motor lift

With the clear 5'' or 7'' touch display all values are easy to read. Without vacuum control. For integration into an existing vacuum system or for configuration with optional vacuum controller.

• Available as hand or motor lift
• Central operating panel with 5'' touch display at the Hei-VAP Expert and 7'' touch display at the Hei-VAP Ultimate
• Clear display of all values (Basic and Advanced modes)
• With timer, limitation of max. temperature, multilingual menu and text display for error messages
• Separate knobs for rotation and heating with locking function to prevent accidental readjusting
• LED ring lights and pictogram to display the activity even from a distance
• Integrated solvent library to facilitate adjustment of the required vacuum on an external vacuum controller
• USB and Micro SD interfaces Hei-VAP Ultimate additionally with LAN- / RS 232 interface (Lab 4.0-ready)
• Optional display of vapor temperature

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask. Supplied condensor as indicated.
-With 5'' touch display

• USB and micro SD interfaces

Specifications Drive
Speed range:	10 ... 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient ... 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Alternative Rotary Evaporators Hei-VAP Expert, with hand lift Alternative Rotary Evaporators Hei-VAP Expert Control, with hand lift Alternative Rotary Evaporators Hei-VAP Expert Control, with motor lift

Hei-VAP Expert Control and Ultimate Control are central control units for regulation of all process parameter: vacuum, cooling temperature, rotation and heating bath temperature.

• Available as hand or motor lift
• 5'' touch display at Hei-VAP Expert Control and 7'' at Hei-VAP Ultimate Control for controlling the entire system including the vacuum and the cooling temperature
• For precise monitoring, the pictogram on the-display also symbolizes active functions
• Separate knobs for quick access: the right one for direct vacuum control, the left one for the rotation
• Setting of values either via the touch display or the separate quick access knobs
• Direct access to two favorites on the start screen
• Expandable solvent library: user defined favorites can be transfered to other devices using a USB stick
• User defined evaporation processes (ramps) can be defined and saved
• Automatic evaporation with the Dynamic AUTOaccurate Program (DAA)
• USB and Micro SD interfaces, Hei-VAP Ultimate Control additionally with LAN- / RS 232 interface (Lab 4.0-ready)

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask, Control-Box. Supplied condensor as indicated.

Specifications Drive
Speed range:	10 - 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient - 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Alternative Rotary Evaporators Hei-VAP Ultimate Control, with motor lift Alternative Rotary Evaporators Hei-VAP Ultimate, with hand lift Alternative Rotary Evaporators Hei-VAP Ultimate, with motor lift Alternative Rotary Evaporators Hei-VAP Expert Control, with hand lift Alternative Rotary Evaporators Hei-VAP Expert Control, with motor lift

Hei-VAP Expert Control and Ultimate Control are central control units for regulation of all process parameter: vacuum, cooling temperature, rotation and heating bath temperature.

• Available as hand or motor lift
• 5'' touch display at Hei-VAP Expert Control and 7'' at Hei-VAP Ultimate Control for controlling the entire system including the vacuum and the cooling temperature
• For precise monitoring, the pictogram on the-display also symbolizes active functions
• Separate knobs for quick access: the right one for direct vacuum control, the left one for the rotation
• Setting of values either via the touch display or the separate quick access knobs
• Direct access to two favorites on the start screen
• Expandable solvent library: user defined favorites can be transfered to other devices using a USB stick
• User defined evaporation processes (ramps) can be defined and saved
• Automatic evaporation with the Dynamic AUTOaccurate Program (DAA)
• USB and Micro SD interfaces, Hei-VAP Ultimate Control additionally with LAN- / RS 232 interface (Lab 4.0-ready)

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask, Control-Box. Supplied condensor as indicated.

Specifications Drive
Speed range:	10 - 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient - 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Alternative Rotary Evaporators Hei-VAP Ultimate Control, with hand lift Alternative Rotary Evaporators Hei-VAP Ultimate, with hand lift Alternative Rotary Evaporators Hei-VAP Ultimate, with motor lift Alternative Rotary Evaporators Hei-VAP Expert Control, with hand lift Alternative Rotary Evaporators Hei-VAP Expert Control, with motor lift

With the clear 5'' or 7'' touch display all values are easy to read. Without vacuum control. For integration into an existing vacuum system or for configuration with optional vacuum controller.

• Available as hand or motor lift
• Central operating panel with 5'' touch display at the Hei-VAP Expert and 7'' touch display at the Hei-VAP Ultimate
• Clear display of all values (Basic and Advanced modes)
• With timer, limitation of max. temperature, multilingual menu and text display for error messages
• Separate knobs for rotation and heating with locking function to prevent accidental readjusting
• LED ring lights and pictogram to display the activity even from a distance
• Integrated solvent library to facilitate adjustment of the required vacuum on an external vacuum controller
• USB and Micro SD interfaces Hei-VAP Ultimate additionally with LAN- / RS 232 interface (Lab 4.0-ready)
• Optional display of vapor temperature

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask. Supplied condensor as indicated.
-With 7'' touch display

• USB and micro SD interfaces and LAN/RS 232 interfaces (Lab 4.0-ready)

Specifications Drive
Speed range:	10 ... 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient ... 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Alternative Rotary Evaporators Hei-VAP Expert, with motor lift Alternative Rotary Evaporators Hei-VAP Expert Control, with hand lift Alternative Rotary Evaporators Hei-VAP Expert Control, with motor lift

With the clear 5'' or 7'' touch display all values are easy to read. Without vacuum control. For integration into an existing vacuum system or for configuration with optional vacuum controller.

• Available as hand or motor lift
• Central operating panel with 5'' touch display at the Hei-VAP Expert and 7'' touch display at the Hei-VAP Ultimate
• Clear display of all values (Basic and Advanced modes)
• With timer, limitation of max. temperature, multilingual menu and text display for error messages
• Separate knobs for rotation and heating with locking function to prevent accidental readjusting
• LED ring lights and pictogram to display the activity even from a distance
• Integrated solvent library to facilitate adjustment of the required vacuum on an external vacuum controller
• USB and Micro SD interfaces Hei-VAP Ultimate additionally with LAN- / RS 232 interface (Lab 4.0-ready)
• Optional display of vapor temperature

Scope of supply: Flask clamp Easy-Clip, vapour tube, ventilation cap, heating bath, 1-l receiving flask, 1-l evaporating flask. Supplied condensor as indicated.
-With 7'' touch display

• USB and micro SD interfaces and LAN/RS 232 interfaces (Lab 4.0-ready)

Specifications Drive
Speed range:	10 ... 280 rpm
Speed display:	Digital
Stroke displacement: Protection class:	155 mm IP 20
Heating bath
Bath volume:	4.5 L
Temperature range:	Ambient ... 210 °C
Power input: Protection class:	1300 W IP 67
General data
Max. size evaporating flask:	5 L
Condensing surface:	1400 cm2
Condensing surface XL condenser:	2200 cm2

Alternative Rotary Evaporators Hei-VAP Expert, with hand lift Alternative Rotary Evaporators Hei-VAP Expert Control, with hand lift Alternative Rotary Evaporators Hei-VAP Expert Control, with motor lift

For extraction, drying or solvent preparation in large volumes.

• Cooler protection with simultaneous visual control
• Implosion protection by safety glass
• Easy and safe change flasks with the EASY LOCK flask fixing system
• Highest safety equipment both on the housing as well as security functions on the touch display
• During use, the evaporator flask is illuminated for better reaction control
• The universal heating bath is suitable for applications with water or oil
• Receiver cassettes and additional PMMA door housing protect against threat of glassware breakage
• With an automatic water replenishment, overflow protection and bottom drain valve
• Control panel with all programs for automated distillation, vacuum controller and display for all process parameters
• With timer, ramp function and two programs for process control: SETpressure and AUTOaccurate
• Space flexibility and storage space due to optional base
• IQ-OQ Approval and documentation is possible for this model
• Combinable with the automatic module Distimatic for continuous, unattended operation

Scope of delivery: Rotary evaporator incl. complete glassware, vacuum controller, vacuum valve, vacuum and boiling temperature sensor

Specifications Drive
Speed range:	6 ... 160 rpm
Speed display:	digital
Stroke displacement:	180 mm
Heating bath
Bath volume:	18 L (H2O) / 14 L (Oil)
Temperature range:	20 ... 180 °C
Power input:	4600 W
General data
Condensing surface:	1,2 m2
Dimensions (W x D x H):	970 x 690 x 1600 mm
Weight:	approx. 120 kg
Power supply:	400 V
Protection class:	IP 20

Accessories Accessories for Rotary Evaporators Hei-VAP Series Accessories Distilling Spiders for Rotary Evaporators Hei-VAP series Accessories Evaporator flasks for Rotary Evaporators Hei-VAP Series Accessories  Accessories Circulating Coolers Hei-CHILL 250 / 350 Accessories  Accessories Heating bath liquid Accessories Circulating Coolers Hei-CHILL 600 / 1200 Accessories Spare Vapor tube for Rotary Evaporators Hei-VAP Series Alternative Rotary Evaporators Hei-VAP Core, with hand lift Alternative Rotary Evaporators Hei-VAP Core, with motor lift Alternative Rotary Evaporators Hei-VAP Core Packages

Rotary evaporator with user-friendly interface and manual height adjustment for simple and safe operation. The compact design makes optimum use of the available laboratory space. For applications such as powder drying and suspensions, the evaporator flask can be rotated clockwise or counterclockwise.

• Coated glassware
• Intuitive control unit with digital display
• Robust and chemical-resistant vacuum seal
• Compact heating bath with digital display
• Heating bath can be positioned on the right or left
• Small footprint

Protective cover for heating bath optionally available. Please order separately.

The new RV 3 is the ideal entry-level model of the IKA rotary evaporator portfolio. Thanks to specially designed glass guides, the vertical condenser makes extremely efficient use of the 1500 cm² cooling surface.

• 4L water heating bath with digital temperature display and carrying handles
• Mechanical lift end-point safety stop
• Locking mechanism: red indicator shows unlocked position of the vapor tube
• Manual lift for precise positioning of the glassware, single-handed, suitable for left and right-handed operators
• Adjustable immersion angle
• Stepless speed setting with dial control and speed display
• Flask clamping mechanism with integrated push-off function for easy exchange of evaporation flasks

Rotary Evaporator without glassware.

Scope of supply: Rotary Evaporator RV 3 eco, Heating bath HB eco, clamps for glassware, Woulff bottle

Specifications Drive	RV 3 V // RV 3 V-C // RV 3 FLEX
Speed range:	20 ... 300 rpm
Stroke displacement:	150 mm
Heating bath
Bath volume:	4 l
Temperature range:	ambient ... 90 °C
Heating power:	1400 W
General data
Permissible ambient temperature:	5 ... 40 °C
Permissible relative humidity:	80 %
Dimensions (W x D x H):	440 x 330 x 530 mm
Weight:	13.5 kg // 13.5 kg // 12 kg
Protection class according to DIN EN 60529:	IP 20
Power supply:	100 ... 240 V / 50/60 Hz

Alternative Rotary Evaporator RV 3 V / RV 3 V-C