Spoons, Spatulas

With brown graduations. Sterilisable up to 134 °C.

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.

Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.

The reusable borosilicate glass syringes offer superior chemical and heat shock resistance. A precious, low cost alternative to disposable plastic syringes, complementing the self-refilling models in many applications.

• Precision-machined plunger and barrel,
• Excellent fitting and liquid tightness (not gas tight)
• Permanent, high visibility graduations
• Autoclavable at 121 °C / 250 °F

Three-part syringe with cylinder, plunger and sealing ring.

• Cylinder, PP
• Plunger, PP
• Lubricant silicone oil
• Latex free
• PVC free
• Sterile
• Individually packed

Clear glass, with calibrated cylinder.
With chemically-resistant, diffused amber stain graduations.

Clear glass, with calibrated cylinder.
With chemically-resistant, diffused amber stain graduations.

HD syringe: High Dynamic plunger has been optimised for higher throughput in the headspace technique.
Novel metal spring allows working with enhanced tightness over a large temperature range. Which results in increased accuracy and reproducibility of your headspace GC analysis.

HDHT syringe: Unique cement-free snap-on connection. The syringe is chemically inert and temperature stable up to 200 °C which broadens the range of possible applications.

Made from neutral glass, with steel piston. Brown graduation, acid and alkali resistant. With centered Luer-slip/Luer-lock. May only be used for technical purposes. Autoclavable up to 200 °C.

Syringes for CTC Analytics CombiPal and GC PAL.

• High reproducibility, low carry-over
• For Thermo TriPlus

With fixed needles (FN).

With cemented-in needles (N) for autosamplers Agilent 7673 - 7683, 6850 ALS and with fixed needle (FN) for CTC GC PAL instruments.

Syringe types with special needle (SN) available on request.

Removable. For use with Rheodyne valves and Valco system VSF 2. Fit Hamilton syringes from 5 to 100µl or 250 to 1000µl capacity.

With deactivated needle and glass barrel for inert liquid path and enhanced lifetime. Near zero carryover.

With fixed needle (FN) for CTC GC PAL system autosamplers.

Syringe types with Special needle (SN) available on request.

Hamilton Neuros™ syringe technology provides unprecedented functionality for controlled injections e.g. of tissues and animals. An industry first, the Neuros™ accurately dispenses 50 nL to 100 µL of liquid through an ultrafine needle protected by a custom-designed sleeve. Developed specifically for the neurosciences, the Neuros minimizes injection site damage by increasing needle rigidity and delivering a microvolume of liquid to an exact location.

• Adjustable needle exposure of 0 to 20 mm
• Almost no dead volume
• Needle rigidity improves insertion path accuracy
• Minimal tissue damage reduces injection variability
• Reduced sample loss saves money and materials
• Fine gauge needle creates smaller injection sites
• Compatibility with most infusion pumps and stereotaxic holders means an easy integration into existing processes
• Also available as beveled 12° point (point style 4)

Hamilton Neuros™ syringe technology provides unprecedented functionality for controlled injections e.g. of tissues and animals. An industry first, the Neuros™ accurately dispenses 50 nL to 100 µL of liquid through an ultrafine needle protected by a custom-designed sleeve. Developed specifically for the neurosciences, the Neuros minimizes injection site damage by increasing needle rigidity and delivering a microvolume of liquid to an exact location.

• Adjustable needle exposure of 0 to 20 mm
• Almost no dead volume
• Needle rigidity improves insertion path accuracy
• Minimal tissue damage reduces injection variability
• Reduced sample loss saves money and materials
• Fine gauge needle creates smaller injection sites
• Compatibility with most infusion pumps and stereotaxic holders means an easy integration into existing processes
• Also available as beveled 12° point (point style 4)

With PTFE plunger seal. Gastight microlitre syringes with cemented-in needles (N). Needle length: 51 mm

With PTFE plunger seal. Gastight microlitre syringes with cemented-in needles (N). Needle length: 51 mm

Glass barrel with PTFE-coated plunger. Gas-tight microlitre syringes with removable needle (RN). Needle length: 51 mm

Glass barrel with PTFE-coated plunger. Gas-tight microlitre syringes with removable needle (RN). Gaseous samples can be safely and conveniently transported and stored in sample lock (SL) syringes. Needle length: 51 mm

Glass barrel with PTFE-coated plunger and seal, and Luer lock outlet. With 6-32 UNC female thread. Allows attachment to drive arm mechanisms, e.g. Microlab 500 Series diluters/dispensers. Gas-tight microlitre syringe without needle. TLLX= Plunger stop fitted to prevent damage to the PTFE seal. Prevents the plunger tip from reaching the end of the syringe.

Glass barrel with PTFE-coated plunger and seal, and Luer lock outlet (TLL). With UNC female thread. Allows attachment to drive arm mechanisms, e.g. Microlab 500 Series diluters/dispensers. Gas-tight microlitre syringe without needle. TLLX= Plunger stop fitted to prevent damage to the PTFE seal. Prevents the plunger tip from reaching the end of the syringe.

Glass barrel with PTFE-coated plunger, seal and with Luer Tip (LT).
Gas-tight microlitre syringe without needle.

10µl to 250µl

• for use with gases and liquids
• removable needles (RN) or cemented needles (N)
• precision-machined PTFE-tipped plungers
• reinforced plungers
• plunger assemblies and glass barrels are replaceable

Plungers are individually fitted, therefore cannot be interchanged and are not available as replacement parts.

With removable needles (RN), or luer tip (LT). Plungers are individually fitted, therefore cannot be interchanged and are not available as replacement parts.

With cemented needle (N, NR). NR stands for syringes with Rheodyne specified needles. Plungers are individually fitted, therefore cannot be interchanged and are not available as replacement parts. Needle length 51 mm.

The end of the plunger has a tungsten wire extension that fits the entire length of the needle all the way to the tip, resulting in a zero dead volume syringe.

With metal handle. Plungers are individually fitted, therefore cannot be interchanged and are not available as replacement parts.

With metal handle. Plungers are individually fitted, therefore cannot be interchanged and are not available as replacement parts. Cemented needles (N) or removable needle (RN).

Removable. With Luer tip made of Kel-F. All hypodermic needles available according to specification in 10 mm to max. 1000 mm lengths. Further point styles and diameters available on request. Needle length: 51 mm

Removable. Not for use in HPLC applications.

• In accordance with ISO 7864 and DIN 13097
• Thin-walled needles
• Made of stainless, chromium-nickel steel
• Smooth surface with light silicone coating
• Minimal pain upon puncture
• Transparent Luer-Lock plastic hub
• Made of Polypropylene (needle hub)
• Box of 100 pieces

Syringes for CTC Analytics CombiPal and GC PAL. High reproducibility, low carry-over.

Standard plunger protection syringe.

Made of soda limeglass. With centre glass or metal luer nozzle (Luer or Luer-Lock). Only plungers and barrels with identical lot numbers are interchangeable (between identical capacity syringes). Autoclavable up to +134 °C. The amber graduation is acid and alkali resistant. Only for technical purposes.

• Ultra sharp cut by Lancet Point technique
• Stainless steel cannula with special silicone coating
• Transparent and color-coded Luer-Lock thread acc. to EN ISO 6009

• Large volume range from 1 to 99 mL
• Same precision and accuracy as other Gilson pipettes
• Maintenance-free
• Reduction of workload
• Great versatility

With Luer push-on fitting for use with disposable syringes. Supplied sterile in boxes of 100. Colour-coded.

• Graduation in ml for volume dosing, scale is extended over the nominal volume
• Material: Barrel: Polypropylene, Plunger: Polyethylene
• Highly transparent barrel with green plunger and black graduations for ideal readability, permanent marking
• Safe plunger backstop for easy pulling up to the maximum volume
• Silicone oil-free
• Luer Slip to put on the needle, centric or eccentric or Luer Lock conus, centric
• Latex- and PVC-free
• Sterile, single packed or non-sterile bulk packing
• Manufactured according to EN ISO 7886-1

Syringe barrel and plunger made of polypropylene (PP), double sealing ring made of green latex-free elastomer (TPE). All sizes with Luer concentric nozzle.

• EO sterilized, single packs
• Latex and PVC-free
• Plunger lubricant silicone oil
• Plunger stop by retaining ring
• Ribbed thumb rest surface

For 25 to 500 µl Syringes.

For 1 to 2.5 ml syringes and 500 µl eVol syringes.

Bevelled, Luer-Lock, autoclavable.

Bevelled, Luer-Lock, autoclavable.

With Luer-Lock fitting.

Disposable syringes with welded-in needle for U-100 insulins. The orange caps protect the sterile interior of the syringes.

• Triple facet cut
• Silicone coated
• Black scale with large digits
• Pyrogen and latex free

PTFE-coated plunger and seal, and Luer lock outlet. Gas-tight microlitre syringe without needle.

For Shimadzu AOC-14, AOC-17, AOC-20 and AOC-20i. Needle tip: cone.
Article 6.205 989 with GT plunger.

Glass barrel with PTFE-coated plunger.

• For use with gases and liquids
• Precision-machined PTFE-tipped plungers
• Reinforced plungers
• Plunger assemblies and glass barrels are replaceable

Removable, with Luer tip. Needle length: 51 mm.

For 10 µl syringes.

For 10 µl syringes.

For 5 µl syringes.

For 5 µl syringes.

For 25 µl - 2.5 ml syringe valve.

For 25 to 500 µl Syringes.

Graduated.

Bag with valve spare parts: 2 springs, 2 balls, 2 washers for valve and 1 barrel washer.

For 0.3 to 10 ml syringes.

Luer Lock. Blunt end.

• Thin-walled needles
• Made of stainless, chromium-nickel steel
• Smooth surface with light silicone coating
• Minimal pain upon puncture
• Transparent Luer-Lock plastic hub made of Polypropylene
• Colour-coded hub conforms to ISO 6009
• Box of 100 pieces

For use with Microlab 600 Diluter/Dispenser.

GC syringes for Agilent autosampler 7673, 7683 and 6850

• With fixed or removable needle
• Two different needle diameter and tapered needles
• High reproducibility, low carry-over