Surface, Insertion thermometers

Measuring range -50 to +150 °C, accuracy ± 1 °C. With hold function. Probe made of stainless steel, 125 x 3.5 mm, with protective plastice sleeve and clip, with battery 1 x 1.5 V (LR44). Dimensions (L x W): 60 x 20 mm.

Measuring range -50 to +150 °C, accuracy ± 1 °C. Probe made of stainless steel, 120 x 3.5 mm, with protective plastic sleeve and clip, with battery 1 x 1.5 V (LR44). Overall dimensions (L x W): 75 x 20 mm.

Measuring range -50 to +300 °C, accuracy ± 1 °C until 150 °C, above ± 2 °C. With hold function. Probe 200 x 3.5 mm with tip made of stainless steel, with adjustable protective plastic sleeve and clip, with battery 1 x 1.5 V (LR44). Dimensions (L x W): 78 x 25 mm.

Waterproof. Measuring range -50 to +300°C / -58 to +572°F, accuracy ± 1°C until 150°C, above ± 2°C. With hold function and Max/Min function. Probe made of stainless steel, 85 x 3.5mm, with protective plastic sleeve, with battery 1 x 1.5V (LR44). Overall dimensions (L x W): 195 x 50mm.

Waterproof. Measuring range -50 to +150 °C / -58 to +302 °F, accuracy ± 1 °C. With hold function. Probe made of stainless steel, 85 x 3.5mm, with protective plastic sleeve, with battery 1 x 1.5V (LR44). Overall dimensions (L x W): 185 x 30mm.

Waterproof instrument in plastic housing (food-grade). Low budget, durable instrument for measuring temperature in air, gas, liquid and ductile substances (acc. to EN 13485).
Range of applications: Food (HACCP), industry, agriculture

• 1-second measuring frequency
• Max-Min-Hold function
• °C/°F-selectable

For a variety of measuring devices; thermometers, digital balances, pocket calculators, watches, timers etc.

Measuring range -50 to 200 °C x 0.1 °C, switchable to °F. Hfunction and 125 x 3.5mm stainless steel penetration probe. With battery.
Maxi-T and Maxi-Pen with maximum-minimum memory and water-proof casing.

Robust and impact resistant temperature measurement device for Pt 1000 penetration probe (connection Lemo size 0). TFX 420 with MIN, MAX & Hold function. For control measurements in laboratories, food sector, storage and incoming goods. For temperature determination of air, liquids, plastic substances and food. Conform to HACCP and DIN EN 13485. With battery and factory calibration certificate.

• Probes made of stainless steel, for temperatures up to +400 °C
• Accuracy: exceeds DIN IEC 584, class 1

The robust and shock-resistant insertion thermometer TTX 110 are suitable for HACCP core temperature measurement during transport, storage and incoming goods department in accordance with DIN EN 13485 as well as for laboratory temperature measurements.

• Battery included and replaceable by the user if required
• Splash-proof
• Factory calibration certificate
• Temperature probe for TTX 110 is permanently attached, needle Ø 3 mm, length = 90 mm, pointed

Ideal for quick, simple core temperature measurements in various fields, e.g. restaurants, hotels, service kitchens, supermarkets etc. Wide measurement range and highly accurate. With Auto-Hold function for final reading.
Includes sensor protection cap and battery. Calibration certificate on request.

The testo 106-T1 kit also contains a TopSafe protective case and a holster clip for belt or wall.

Waterproof. Measuring range -50 to +300°C / -58 to +572°F, accuracy ± 1°C until 150°C above ± 2°C. With hold function and Max/Min function. Penetration probe made of stainless steel, 140 x 3.5mm with 1m cable and handle. With battery 1 x 1.5V AAA. Overall dimensions (L x W): 140 x 75mm.

Foldable pocket themometer, watertight. Ideal for measuring foods (acc. to EN13485), liquids etc. ThermoJack PRO with calibration certificate.

Temperature range: -50 to 300 °C. Resolution 0.1 °C from -50 to 180°C, 1 °C for the rest of the range. Dimensions (W x D x H) 90 x 60 x 25 mm. With battery. For appropriate temperature probes see order no. 9.243 111 to 114.

• Easy operation and handling
• Instrument and probe waterproof (IP67)
• Conform to HACCP and EN 13485
• Universally applicable

With fixed penetration probe on 800 mm cable and adjustable min. / max. alarms. With wall clip and stand. Supplied with battery.

• Fast temperature checks
• Including needle protection
• Battery exchangeable

The practical folding thermometer TLC 700 is suitable for measuring the core temperature during transport, storage and receiving of goods. Thanks to the foldable penetration probe the waterproof thermometer (IP 65) can be stored safely. The device is primarly characterized by its small size and the large display and comes with a calibration certificate.

Temperature range: -35 to 500 °C, resolution 1 °C. Rapid response and ergonomic design. Dimensions (W x D x H) 90 x 60 x 25 mm. With stainless steel probe (L x dia.) approx. 100 x 2.5 mm. With battery.

Temperature probe with two independent temperature elements and two Lemo-connectors.
Particularly useful for parallel evaluation of values measured in aggressive media (temperature range: -200°C to +250°C). The temperature elements are located in a stainless steel core which is
entirely sealed in a solid and seamless PTFE coating. This provides high chemical resistance and rigity, however, the probe can be bent manually to the desired shape. The tip of the probe is smaller (6mm dia.) for faster measurement response. 2 x Lemo size 1 connectors, with 4 cores. Both connectors are situated directly at the end of the probe. It can easily be used for further applications without removing any cables.

Optimal for controlling of refrigerator and freezer temperatures. With temperature alarm.

• Measuring range: -50 to 70°C
• Accuracy: 0.1°C
• External remote sensor cable PVC, length 3m
• Dimensions: approx. 65 x 67 x 23 mm

Attributes:

• High accuracy through fuzzy logic algorithm
• Minimizes temperature overshoot
• Suitable for all magnetic stirrers

One-handed penetration thermometer. For measurements according to the EU Directive (EN13485) concerning the control of foodstuffs (HACCP). Waterproof, can be rinsed. With battery.

Digital temperature measuring device with 2 input channels, incl. 1 sensor with flat plug (measuring range up to approx. 150 °C, cable length: 3 m). For measuring sensors type K (NiCr-Ni). Measuring range: -200 ...1370 °C / -328 ... 2498 °F. Resolution: 0.1 °C/F. Accuracy: ± 0.1 %. With hold function, with max/min memory and automatic switch-off after 30 min. With PC interface and bag. Battery: 1 x 9 V block. Dimensions: 184 x 64 x 30 mm

• PTB approved
• Robust and impact resistant
• High accuracy
• Waterproof IP 67
• Approx. 5 years battery life
• According to EN 13485
• With fixed Pt 1000 probe
• 2 cable lengths (60cm, 150cm) available

Dipping / penetration thermometer for measuring the temperature in air, soft or powdery materials and liquids.

• Probe: Stainless steel, diam. 4mm, length 120 mm
• Pointed probe, fixed
• Robust and impact-resistant
• Exchangeable battery
• °C/°F switchable
• Automatic deactivation after approx. 10 min.
• With needle guard and spare battery

This temperature measurement stick is one of the fastest miniature thermometers available with a wide measurement range of -50 to 350 °C, for short exposure (1 to 2 minutes) up to 500 °C. Its professional industry sensor (type K thermocouple) offers considerably better accuracy in the upper measurement range than most thermometers in this price class.
Includes fastening clip and battery. Calibration certificate on request.

Features:

• High accuracy
• Four-wire measuring system
• Waterproof IP 67
• Approx. 5 years battery life
• Factory calibration certificate
• Different probes for different applications

Robust and compact temperature meter with 3 channels for connecting external temperature probes. The temperature meter has one input for connecting high-precision Pt100 probes and two inputs for connecting fast thermocouple probes of type K, T, J, and S.

• Illuminated display makes it easy to read the measured values in a dark environment
• Optional probes for core temperature, surface temperature, and air temperature
• System accuracy of 0.05 °C with a resolution of 0.001 °C when using Pt100 immersion/insertion probes
• Display of T, min./max., and average values
• Adjustable limit values
• Acoustic alarm in case of limit violations
• Cyclic printing of measured values (please order printer separately)
• Certified acc. to EN 13485
• HACCP compliant

• Recording of measurement series with freely selectable memory cycle (0.5 s to 24 h)
• Analysis and presentation of the measurement data (tabular or graphical) with the PC software

Perfectly designed instrument for measurements according to HACCP rules. The instrument is very robust and watertight (IP65). The probe included is exchangeable and the connection is very strong (screwthreaded connector). Supplied with a traceable calibration certificate. Especially suitable for direct measurement of materials.

1- or 2-Channel thermometers for use with thermocouples (Type K, J, T, E)
TFN 520 / TFN 520-SMP / TFN 530 / TFN 530-SMP

Applications:
Heating / Air-conditioning, ventilation / Air, gases, fluids / Surface temperature / Plastic materials / Laboratories

Attributes:

• Robust and impact resistant
• Min / Max, Hold facility
• °C/°F selectable
• Battery charge status indicator
• Changeable battery
• Factory calibration certificate

Watertight, ergonomic shaped pocket thermometer with robust insertion tip. The long sensor tube is particularly suitable to measure in liquids, food etc.

• Wide measuring range
• High accuracy
• Watertight IP67
• 1-second measuring interval
• MAX-/MIN-/HOLD-function
• Disable Auto-OFF-function
• °C/°F-switchable
• 0°C adjustment function
• HACCP conformity, acc. to EN 13485

Capillary: colourless prismatic round, diam. 6 to 8 mm, environmentally friendly blue filling.

The climate measuring instruments testo 440 combine the benefits of a compact handheld device with intuitive measurement menus and a comprehensive selection of air velocity & IAQ probes. Both the digital Testo Smart Probes and numerous Testo temperature probes can be connected. Clearly structured menus for measuring volume flow in ducts/at outlets, degree of turbulence, cooling/heating load, mould indication and logging mode are stored on the instrument.
The testo 440 dP also has an integrated differential pressure sensor. This makes measurements at filters as well as Pitot tube and K-factor measurements possible.

• USB interface for data export and optional printout of measuring values
• Up to 3 probes can be connected
• Parallel display of 3 measuring values
• Bluetooth probes for measuring convenience and easy storage in the case
• Universal handle for all probes
• Measurement of the following parameters are possible: °C, % r.h., CO, CO₂, m/s, Lux, hPa

For storing and transporting the climatic measuring device testo 440 and additional probes.

• Cable probe with penetration tip
• °C/°F selection
• Automatic deactivation after 60 min

Range -50 to 200 °C, resolution 0.1 °C. Stainless steel probe sheath approx. 120 x 3.5 mm L x Ø with penetration tip. With hinged, digital display head which acts as an on / off switch. Battery life approx. 5000 hours.

Flexible. With TC plug, type K.

With foldable penetration probe. Rugged and waterproof.

• HACCP compliant, EN 13485 certified
• Hold function for final value recognition
• Min. / Max. memory
• Illuminated LCD display

Handy and robust 2-channel temperature instrument for 2 thermocouple probes type K.

• USB interface
• Max-Min-Hold-Function
• Average value, differential temperature
• Optional DE-Graph-Windows Software for online documentation
• ISO calibration certificate
• Made in Germany

A surface thermometer with a professional-quality, cross-band sensor at a low price. The spring-action of the broad thermal sensing tip guarantees rapid response time and excellent accuracy because it always lays flat, even on rough surfaces.
Includes fastening clip and battery. Calibration certificate on request.

With fix mounted electrodes, optimised for various applications. For measuring pH value and temperature.

• One-button calibration function
• 1-3-point calibration available
• Hold function
• Clearly readable, split display
• Automatic temperature compensation (ATC)
• Hold function for current value
• High degree of protection IP 65
• Battery life >100 hours in continuous mode
• Battery status indicator
• Automatic switch-off

Economical digital thermometer with hinged, fold-away probe made of stainless steel. For air, liquid and surface measurements. High accuracy level over the entire measuring range. Easy to read LCD. Approx. 4 year battery life. Supplied with calibration certificate.

For temperature, moisture and airflow.
For highly accurate temperature measurements with USB PC online interface. (Optional: Windows SmartGraph software for graphical and tabular documentation, etc). Integral probe calibration for sensor tolerance compensation. Min.- Max.- Hold- and AVG- functions. The large LCD shows two measurements synchronously, even temperature differences can be displayed (P705, P755, P755-Log, P770).

Specifications
General (all models):
USB interface, Max-Min memory, Hold function, true average calculation over a freely selectable period, Auto-off function, measured quantities can be freely assigned to instrument channels, comprehensive calibration options (selectable 1-point, 2-point or 3-point calibration), large display with bar graph for simultaneous display of 2 measured values
P700/P705:
1/2 measurement channels (Pt100 4-wire probe, thermocouples type J, K, L, N, T, R, S), measurement ranges and accuracies: Pt100:-200 to +850°C ( ±0.1 °C -100 to +200°C, otherwise ±0.1% of measurement value)
thermocouples, DIN types (-200 to +1760°C)
P710/P715:
1/2 measurement channels (Thermocouples type K, J, L, N, T), measurement ranges and accuracies: -200 to +1370°C (±0.2 °C from 0 to +200 °C, ±0.5 °C to 1000 °C, otherwise ± 1.0 °C of measurement value)
Thermocouples acc. to EN 60584
P750/P755/P755-Log:
1/2 measurement channels (Pt100 4-wire probe, thermocouples type J, K, L, N, T, R, S, moisture, flow), measurement ranges and accuracies: Pt100: -200 to +850°C (±0.03°C -50 to +200°C, ±0.05°C -200 to +200°C, otherwise ±0.05% of measurement value), thermocouples, DIN type (types J, K, L, N, T 0 to 200 °C, ±0.3°C, +200 to +1000°C ±1.0 °C, otherwise ±1.5°C;
type R, S ±1.0 °C +0.1% of measurement value) humidity 0 to 100% R.H. ( ±1.5%R.H.), flow 0 to 40 m/s (±0.5% of measurement value +1.0% of final value)
P770:
2 measurement channels (Pt100, thermocouples type J, K, L, N, T, R, S, moisture, flow), measurement ranges and accuracies: Pt100: -200 to +850°C ( ±0.1 °C -100 to +200°C, otherwise ±0.1% of measurement value)
thermocouples, DIN types, humidity 0 to 100%R.H. ( ±1.5%R.H.), flow 0 to 40 m/s (±0.5% of measurement value)
Dimensions (L x W x D)/ weight: 200 x 85 x 40mm / 300g

P700-P755 for Ex-use Zone 1 and Zone 2 according to ATEX approval II 2 G Ex ib IIB T4 Gb available on request.

Capillary: yellow enameled, round. Optional available with official calibration certificate, works certificate or DAkkS-calibation certificate. Please specify with order.
Breakage protected versions with FEP-coating available on request.

1) with DAkkS calibration certificate
2) 2 check points
3) 3 check points
4) with safety coating

Insertion thermometer with 180° swivel head and robust insertion tip. The long sensor tube is particularly suitable to measure in liquids.

• Immersion resistance temperature probes Pt 100, class A, 4-wire connection
• Connection-wire Teflon/Silicone isolated, with PHYSICS-Plug 0,01 K resolution
• Probe made of stainless steel 1.4571 or glass N 16 B, Metalprobe also available with insert tip
• Instrument and thermometer combination, optional, available with calibration

• Immersion resistance temperature probes Pt 100, class A, 4-wire connection
• Connection-wire Teflon/Silicone isolated, with PHYSICS-Plug 0,01 K resolution
• Probe made of stainless steel 1.4571 or glass N 16 B, Metalprobe also available with insert tip
• Instrument and thermometer combination, optional, available with calibration

• Immersion resistance temperature probes Pt 100, class A, 4-wire connection
• Connection-wire Teflon/Silicone isolated, with PHYSICS-Plug 0,01 K resolution
• Probe made of stainless steel 1.4571 or glass N 16 B, Metalprobe also available with insert tip
• Instrument and thermometer combination, optional, available with calibration

• Immersion resistance temperature probes Pt 100, class A, 4-wire connection
• Connection-wire Teflon/Silicone isolated, with PHYSICS-Plug 0,01 K resolution
• Probe made of stainless steel 1.4571 or glass N 16 B, Metalprobe also available with insert tip
• Instrument and thermometer combination, optional, available with calibration

Checks the quality and temperature of cooking oils, with indication by a clearly visible signal lamp. Can be used in hot oil up to 200 °C.

• Large display with big numbers
• FOM 330-4 with 4 controls for frequent adjustments
• FOM 330-1 with 1 control for infrequent adjustments
• Simplified menu structure
• Incl. calibration protocol

• Immersion resistance thermometer Pt100, stainless steel, acc. to DIN EN 60751 Class AA, 4-wire connection
• Stainless steel compensation line 4 x 0.22 mm², teflon/silicone insulated, fix connected through stainless steel transition casing diam. 6 x 40 mm
• Cable outlet secured by means of heat-shrink tubing

• Resistance thermometer, Pt100, glass, acc. to DIN EN 60751 Class AA, 4-wire connection
• With ring marks on the glass shaft according to the immersion depths of standardised precision glass thermometers
• Glass shaft diam. 6 mm, narrowed at sensor to diam. 3 mm
• Compensation line, teflon/silicone insulated, fix connected through stainless steel transition casing
• Cable outlet secured by means of heat-shrink tubing
• Connection via Physics plug with 0.001 °C resolution

Temperature range -30 to 135 °C, with Pt 1000 sensor, connection plug Ø 2 x 4 mm (W 5790 PP with Ø 2 x 2 mm), 1 m cable (W 2180-KOAX with KOAX plug head).

Ideal for temperature control in liquid and semi-solid media. With foldable penetration probe. Compact and splash proof.

• HACCP compliant, EN 13485 certified
• Auto off after 60 mins.

Splash-proof, robust and handy.
Ideal for measurements under tough environmental conditions.

• Illuminated display with large digits
• Memory for Max. and Min. values
• Hold function
• Integral probe holder enables one-handed operation
• Long battery life (uses 2 x 1.5 V AA batteries)
• Compact size: 130 x 65 x 25 mm