-
- General laboratory consumables
- Occupational safety, Security
- Analytical measurement and testing
- Stirring, Shaking, Mixing
- Sample preparation
- Distillation, separation, filtration
- Heating and cooling technology
- Liquid Handling
- Vacuum technology, Drying, Dry storage
- Optical instruments and Microscopes
- Cleaning and sterilisation
- Environmental-, soil-, water-, food analysis
- Chromatography
- Cleanroom
Electrodes for conductivity measurement
Conductivity cell probes
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9704081_3.jpg;jsessionid=C42695570F26EE86AAB9AC0FDB3F5932)
For all pocket measuring devices for analog measuring cells from the 3xx series, as well as all inoLab laboratory measuring devices for analog measuring cells.
Standard conductivity cell probe TetraCon® 325:
4-pole cell with integral temperature sensor. Measuring range: 1µS/cm to 2S/cm....
IDS conductivity cell probes
![A click opens this product segment](/lab/shop/pic/150x150/owweb/7656781_1.jpg;jsessionid=C42695570F26EE86AAB9AC0FDB3F5932)
For connection to WTW IDS measuring instruments.
IDS conductivity cell probe TetraCon® 925:
Intelligent digital 4-pole cell with integral temperature sensor. Automatical transfer of the cell constant. Cable length 1.5 metres. Measuring range: 1µS/cm to 2S/cm.
TetraCon® 925-3:...
Ion selective combination electrodes perfectION™
![A click opens this product segment](/lab/shop/pic/150x150/owweb/s6685_1.jpg;jsessionid=C42695570F26EE86AAB9AC0FDB3F5932)
With integrated reference electrode. Easy cleaning of the diaphragm between measurements with Click & Clear™ (except Na electrode): by pressing the electrode head, the electrolyte solution flows through the diaphragm. The electrolyte can be easily emptied and refilled. Optimum contact between sample and electrolyte solution is always guaranteed....
Conductivity sensors InLab® for Mettler Toledo conductivity meters
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9041447_1.jpg;jsessionid=C42695570F26EE86AAB9AC0FDB3F5932)
710: 4 platinum poles
720 + 751-4 + 752-6: 2 platinum poles
731 + 738: 4 graphite poles
741 + 742: 2 steel poles
ISM® (Intelligent Sensor Management) is a sophisticated safety concept that leaves nothing to chance. The instrument automatically detects the connected sensor and uses the most up-to-date calibration data stored on the sensor chip....
Conductivity cell probes
![A click opens this product segment](/lab/shop/pic/150x150/owweb/9704078_1.jpg;jsessionid=C42695570F26EE86AAB9AC0FDB3F5932)
For all Cond handheld meters for analogue measuring cells from the 3xx series, as well as all inoLab
® laboratory measuring devices for analogue measuring cells. Except for the Cond 3110, Multi 340 handheld meters.
Ultra-pure water conductivity cell probe LR 325/01:
With integral temperature sensor and flowthrough vessel D 01/T for measuring very low conductivity ranges (<1 µS/cm) e.g. boiler feed water or deionised water. Cable length 1.5 metres. Min. / max. insertion depth 35 / 110mm and flowthrough, measuring range: 0.001µS/cm to 200µS/cm....
Conductivity measuring cells
![A click opens this product segment](/lab/shop/pic/150x150/owweb/6270567_1.jpg;jsessionid=C42695570F26EE86AAB9AC0FDB3F5932)
With plastic shaft and internal temperature sensor NTC30 kOhm, temperature range -5 to 80 °C. Cable with 8-pole plug.
LF 435 T: Conductivity measuring cells with 4 electrode technique for a large measuring range of 5 µS/cm to 500 mS/cm, low maintanance and easy cleaning. For general measurements. With 1.5 m cable....
pH/ORP electrodes SensoLyt® ProcessLine
![A click opens this product segment](/lab/shop/pic/150x150/owweb/7618407_1.jpg;jsessionid=C42695570F26EE86AAB9AC0FDB3F5932)
For the SensoLyt ® armature, for the installation in a flow vessel or in a replacement fitting
- For drinking water, wastewater or in the process
- Also for high pressure and temperature conditions
- Easy to maintain by easy measuring chain replacement