conductivity meters, portable devices

The ProfiLine hand-held conductivity meters have a waterproof (IP 67) housing and a completely sealed silicone membrane keypad with tactile feedback. A separate battery compartment allows easy exchange of standard alkaline, or rechargeable, batteries. The carefully laid out, large displays indicate the reading and other important information. The 3310 series meters have a backlit, graphics display and menu-controlled operation. A selection of application specific conductivity cells cover virtually all measurement tasks.
Easy to operate rugged conductivity meter for measurement of conductivity and salinity. Simplified keypad for clear and secure operation. Simultaneous display of measurement value and temperature. Large LCD display for easy reading. Automatic nlF compensation for all grades of natural water. Works with four-electrode cell TetraCon^® 325 or two-electrode cell KLE 325.

Specifications
Measuring ranges
Conductivity:	0.0 µS/cm ... 1000 mS/cm With 5 measuring ranges in the Auto Range mode
Temperature:	-5.0 °C ... 105.0 °C ±0.1 °C
Salinity:	0.0 ... 70.0
Tref:	20 °C / 25 °C switchable

Accessories Conductivity cell probes

The ProfiLine hand-held conductivity meters have a waterproof (IP 67) housing and a completely sealed silicone membrane keypad with tactile feedback. A separate battery compartment allows easy exchange of standard alkaline, or rechargeable, batteries. The carefully laid out, large displays indicate the reading and other important information. The 3310 series meters have a backlit, graphics display and menu-controlled operation. A selection of application specific conductivity cells cover virtually all measurement tasks.
Comfortable and versatile conductivity meter with integral, time controlled, data logger and 5000 GLP-compliant record memory for extended data collection. Menu controlled, with backlit, graphics display for comfortable, safe operation. Wide range of conductivity cells attachable. GLP-supporting functions, enhanced choice of cell constants, automatic and manual temperature compensation (which can be switched off) with linear and non-linear functions for pure water and natural waters acc. to EN 27888.

Specifications:
Measuring ranges
Conductivity:	0.001 µS/cm ... 1000 mS
TDS:	0 ... 199,9 g/l
Spec. resistance:	0.00 ... 199 MOhm cm
Memory:	5000 records (measured value, temperature, date, time, ID)

Accessories Conductivity cell probes Accessories Conductivity cell probes

For accurate measurement of conductivity, TDS, and salinity in one single instrument, making it an ideal solution for many applications.

• Large 4 digit double line display
• Display of battery life, status and re-calibration
• Automatic temperature compensation (ATC)
• Auto conductivity buffer recognition and calibration
• Selectable TDS factor: 0.40 to 1.00
• Auto off

Specifications
Conductivity range:	0.00 … 20.00 mS/cm
Resolution:	10 µS/cm below 2.00 mS/cm, 0.10 mS/cm above 2.00 mS/cm
Accuracy:	±2 % full scale ±1 LSD
TDS range:	0 … 20000 ppm
Resolution:	10 ppm below 2000 ppm, 100 ppm above 2000 ppm
Accuracy:	±2% full scale ±1 LSD
Salinity range: Resolution: Accuracy:	0 … 10000 ppm 100 ppm ±2 % of full scale ±1 LSD
Calibration points:	1 per parameter
Temperature range: Resolution: Accuracy:	0 … 50 °C 0.1 °C ±0.5 °C + 1 digit
Operating temperature:	5 … 45 °C
Dimensions (W x L x H): Weight:	45 x 170 x 30 mm 90 g
Power supply:	Incl. 4 batteries (A76 or LR44 equivalent)
IP code:	IP 67
Warranty:	1 year

Portable conductivity meter for field work.

• Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicks
• Ergonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo is a comfortable experience. The foldable stand provides optimal viewing on flat surfaces
• IP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo portables able to withstand wet and demanding environments

Supplied with:
F3-Meter: Meter only
F3-Standard kit: Meter with LE703 sensor
F3-Field kit: Meter with LE703 sensor, carrying case

Specifications
Conductivity Measuring range: Resolution: Accuracy:	0.00 µS/cm … 200 mS/cm Automatic range ±0.5 % of the measured value
Temperature Measuring range: Resolution: Accuracy:	0 ... 100 °C 0.1 °C ±0,5 °C
TDS (Total Dissolved Solids) Measuring range: Resolution:	0.01 mg/l … 200 g/l Automatic range
Temperature compensation:	Linear 0.00 ... 10.00 %/°C, reference temperature 20 and 25 °C
Calibration:	1 point, 3 predefined standards
Memory size:	200 measurements, current calibration
Dimensions (W x D x H):	188 x 77 x 33 mm
IP code:	IP 67 (meter + sensor)

Portable pH meter for field work and laboratories.

• Measurement made easy: A large, well-structured display, intuitive button arrangement and simple menu ensure measurements can be performed in just a few clicks
• Ergonomic design for one handed operation: Thanks to its ergonomic design, handling the FiveGo™ is a comfortable experience. The foldable stand provides optimal viewing on flat surfaces
• IP67 Water and dustproof: The IP67 waterproof protection makes the FiveGo™ portables able to withstand wet and demanding environments

Scope of delivery:
F2-Meter: Meter only
F2-Standard kit: Meter with LE438 sensor
F2-Food kit: Meter with LE427 sensor, carrying case
F2-Field kit: Meter with LE438 sensor, carrying case

Specifications
pH Measuring range: Resolution: Accuracy:	0.00 ... 14.00 0.01 ±0.01
mV Measuring range: Resolution: Accuracy:	-1999…1999 mV 1 mV ± 1 mV
Temperature Compensation:	ATC and MTC
Calibration:	3 points, 4 predefined buffer groups
Memory size:	200 measurements, current calibration
Temperature Measuring range: Resolution: Accuracy:	0 ... 100 °C 0.1 °C ±0.5 °C
Dimensions (W x D x H):	188 x 77 x 33 mm
IP code:	IP 67 (meter + electrode)

Portable pH meter with external electrode.

• BNC connection
• With automatic pH calibration
• Handy and robust
• Current value memory
• Simple calibration with keypad
• Electrodes for different applications
• Min/Max- and hold function

pH meter set contains: pH meter PHT 810, penetration electrode AT 206, punching pin, buffer solutions pH 4 and pH 7, KCI solution, carrying case, 2-point calibration certificate

Specifications
Measuring range: Accuracy: Resolution:	0 ... 14 pH ±0.03 pH ±0.01 pH
Operating temperature: Storage temperature:	0 ... 50 °C -25 ... 60 °C
Battery: Battery lifetime:	Lithium 3 V/1 Ah approx.. 5 years
Dimensions (W x L x H):	54 x 110 x 22 mm
Weight:	approx. 200 g

Accessories Electrodes for pH meter PHT 810

With automatic measuring range switching.
The meter is the ideal choice for determination of conductivity, salinity and temperature and combines the features for mobile application in the field with the precision and comfort of a laboratory meter. In the standard version the meter CT 830 is supplied with conuctivity sensor AT 830 C and 1.50 m cable. It is ideally suited for overall applications in the field and in laboratories. Two parallel, largely dirt-insensitive graphite electrodes, the integrated temperature sensor for parallel temperature measurement, an automatic temperature compensation and the wide measuring range are the benefits of the conductivity sensor.

Scope of supply: Meter incl. conductivity sensor, calibration solution 0,1 N / KCL 1288 µs, case

Specifications
Measuring range
Conductivity:	0 ... 200 µS / 0 ... 20 mS / 0 ... 500 mS
TDS:	0 ... 200 mg/l / 0 ... 2000 mg/l / 0 ... 20 g/l / 0 ... 500 g/l
Temperature:	-10 °C ... 100 °C
Display:	128 x 64 pixel, backlighted
Interface:	USB with "Interface HMG USB", isolated
Ambient temperature:	-10 °C ... 55 °C
Rel. humidity:	Max. <95 % (non-condensing)
Connections:	Connector BK for sensor (4-pole USB interface socket)
Housing:	ABS
Dimensions (W x D x H):	200 x 40 x 95 mm
Power supply:	3 batteries Type AA, IEC R6, LR6, 1.5V
IP code:	IP 65

For online measurement of pure and ultrapure water downstream of ionexchange cartridges and for monitoring ring-main systems.

• Large, 2-colour, back-lit graphic digital display
• Direct connection of peripheral equipment at potential-free contact (optionally)
• Wall mounting

Scope of delivery: DC 400, connecting cable, plug-type power supply unit, set of two 1.5 m hoses and measuring cell.

Specifications:
Conductivity measuring range:	0.1 ... 300 µS/cm
Temperature measuring range:	0.1 ... 50 °C
Conductivity limiting value setting:	0.1 ... 30 µS/cm, infinitely variable
Temperature limiting value setting:	1 ... 50 °C infinitely variable
Signal when limiting value is exceeded:	red/green LED indicator + buzzer (both can be deactivated)
Connector:	R ¾"
Interface:	potential-free contact (optionally)
Dimensions ( W x D x H):	73 x 32 x 141 mm
Power supply:	110/230 V, 50 ... 60 Hz

Accessories Accessories for digital conductivity meters DC 400

The battery operated SensoDirect Con 110 is a compact and versatile meter. The unit is extremely easy to use and is equipped as standard with a casing and built-in electrode holder. It is equipped with a LC display showing two or three decimal places (manual measuring range selection) and a measuring range either of 0.001 to 1.999 or 0.01 to 19.99 mS/cm. The SensoDirect Con 110 can be calibrated and adjusted using a potentiometer. It is fitted with a 4 pole connector as standard.

Scope of supply: Meter, battery, conductivity probe, in case

Specifications
Measuring range:	0.001 ... 1.999 mS/cm 0.01 ... 19.99 mS/cm
Resolution:	0.001 / 0.01 mS/cm
Temperature compensation:	0 ... 100 °C, automatically
Amb. Temperature: Rel. Humidity:	0 ... 50 °C 0 ... 80 % (non condensing)
Power supply:	9 V-Block
Dimensions (L x W x H):	208 x 110 x 34 mm
Weight:	Approx. 380 g

Accessories

Portable routine model for conductivity measurement.

• New, intuitive menu structure with fast and easy T-Pad navigation
• Robust design with IP67 protection for use in harsh and demanding environments
• Intelligent Sensor Management (ISM^®) functionality reduces the risk of errors
• Easy 1 point calibration with option of manual cell constant entry
• 3 predefined standards and 1 user defined standard
• Automatic, manual and time dependant endpoint recording
• Data memory storage for 200 data points
• Power requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulators

Scope of supply:
S3-Meter: Includes instrument, electrode clip, operating instructions, quick guide, test certificate, declaration of conformity, batteries
S3-Standard kit: As S3-Meter, but also with InLab 738-ISM and sachets of conductivity standards 1413 µS/cm and 12.88 mS/cm
S3-Field kit: As S3-Standard kit, but also with bottles for calibration, uGo™ carrying case
S3-Bioethanol kit: As S3-Field kit, but also with InLab 725 instead of InLab 738-ISM

Conductivity Measuring range: Resolution: Accuracy:	0.010 µS/cm … 500 mS/cm 0.001 ... 1 (auto-range) ± 0.5%
Temperature Measuring range: Resolution: Accuracy:	-5.0 ... 105.0 °C 0.1 °C ±0.2 °C
TDS (Total Dissolved Solids) Measuring range: Resolution: Accuracy:	0.01 mg/l ... 300 g/l 0.01 ... 1 (auto-range) ±0.5 %
Specific resistance Measuring range:	0.01 ... 100.0 MΩcm
Salinity Measuring range:	0.01 ... 42 psu

Modular professional system for measurements of pH, redox potential, conductivity, salinity / TDS and ion concentration. Fits up to three modules in any composition and order, can be expanded with additional measurement parameters at any time.

• Large, high resolution 7"" colour touch display (capacitive), very clear and easy to operate
• Modularity and flexibility; up to 3 measuring modules can work in parallel, expansion to 3 channels possible
• Universal communication via 2 x USB, Ethernet (LAN) and RS232
• Plain text user interface in 10 languages with menu guidance in full sentences
• OneClick™ operation concept to quickly start frequently used functions and preferred methods
• Storage for user methods
• Highest security and GxP support (ID protection, sophisticated user management, limits / alarms, integrated radio clock, etc.)
• Intelligent sensor management (ISM^®)
• Connection of stirrer, sample changer, PC, barcode reader, keyboard, local or network printer possible
• Storage up to 20000 data sets (measurements, calibrations, methods)
• 17 predefined, 60 user-defined methods
• 5 point calibration (pH), 13 pre-defined and 20 user-defined buffer groups, incl. temperature chart
• uPlace™ electrode arm with perfect vertical movement
• Compatible with all METTLER TOLEDO electrodes (Recommended: ISM^® electrodes)

Scope of supply:
S470-Basic: Includes instrument, 1 x conductivity expansion unit, 1 x pH/mV expansion unit, 1 x blank expansion unit, uPlace™ electrode holder, semi-transparent cover, operating instructions, installation and quick guide, LabX^® direct pH PC software, declaration of conformity, test certificate
S470-Kit: As S470-Basic but with InLab^® Expert Pro-ISM, guide to pH measurements, 2 buffer sachets for pH 4.01, 7.00, 9.21 and 10.00.
S470-USP/EP: As S470-Kit but with InLab^® 741-ISM instead of InLab^® 731-ISM and InLab^® Pure Pro-ISM instead of InLab^® Expert Pro-ISM, BNC/RCA-MultiPin™ ISM-cable (1.2 m), without 1413 µS/cm and 12.88 mS/cm calibration sachets

Specifications	Measuring range // Resolution // Accuracy
Temperature MTC/ATC:	-30.0 ... 130.0 °C // 0.1 °C // ± 0.1 °C
pH:	-2.000 ... 20.000 // 0.001 / 0.01 / 0.1 // ± 0.002
mV:	-2000.0 ... 2000.0 // 0.1 / 1 // ± 0.1
Rel. mV:	-2000.0 ... 2000.0 // 0.1 / 1 // ± 0.1
ISFET pH:	0.000 ... 14.000 // 0.001 / 0.01 / 0.1 // ± 0.05
Conductivity:	0.001 ... 999999 µS/cm // 0.001 ... 1 // ± 0.5% 0.001 ... 2000 mS/cm // 0.001 ... 1 // ± 0.5% 0.001 ... 200 S/m // 0.0001 ... 1 // ± 0.5% 0.001 ... 200000 mS/m // 0.0001 ... 1 // ± 0.5% 0.1 ... 999999 µS/m // 0.001 ... 1 // ± 0.5%
TDS:	0.001 ... 1000 g/l , ppt // 0.001 ... 1 // ± 0.5% 0.001 ... 999999 mg/l , ppm // 0.001 ... 1 // ± 0.5%
Salinity:	0.01 ... 80.0 psu , ppt // 0.01 ... 0.1 // ± 0.5%
Resistivity:	0.01 ... 100.0 MΩ x cm // 0.0001 ... 1 // ± 0.5% 0.01 ... 999999 Ω x cm // 0.01 ... 1 // ± 0.5%
Conductivity Ash:	0.000 ... 2022 % // 0.001 ... 1 // ± 0.5%

FiveEasy™ and FiveEasy™ Plus benchtop meters provide high quality conductivity measurements with the simple click of a button. They are the perfect choice for reliable measurement data at a reasonable price.

• Large, easy to read and easy to understand display with all information visible at a glance
• Five self-explanatory buttons making operation simple and easy
• Fast and easy connectivity for simple and secure data transfer (FP only)
• Electrode arm extension pole included

Scope of supply:
F30/FP30-Meter: Meter with CD operating instructions, QuickGuide, declaration of conformity, test certificate, power supply
F30/FP30-Standard: as F30/FP30-Meter, plus LE703 conductivity sensor, 1 each x 1413 µs/cm and 12.88 mS/cm standard sachets

Specifications
Measuring range (Accuracy)
Conductivity F30 / FP30:	0.01 µS/cm ... 200 mS/cm / 0.01 µS/cm ... 500 mS/cm (± 0.5 % of measured value)
TDS F30 / FP30:	0.01 mg/l ... 200g/l / 0.01 mg/l ... 300 g/l
Temperature F30 / FP30:	0 ... 100 °C (0.5 °C) / -5 ... 105 °C (0.3 °C)
Calibration F30:	1 point, 3 predefined standards
Calibration FP30:	1 point, 3 predefined standards, manual cell constant input
Input:	Mini-DIN
Temperature compensation:	Linear: 0.00 %/°C ... 10.00 %/°C
Reference temperature:	20 °C and 25 °C
Power supply:	100 ... 240 V / 50 ... 60 Hz / 12 V DC
FP30 only
Salinity:	0.00 ... 42 psu
Memory:	200 measurements
Interface:	RS232, USB

Portable professional model for conductivity measurement.

• New, intuitive menu structure with fast and easy T-Pad navigation
• Robust design with IP67 protection for use in harsh and demanding environments
• Intelligent Sensor Management (ISM^®) functionality reduces the risk of errors
• New sunlight-proof screen guarantees screen readability even in direct sunlight
• New StatusLight gives a fast, visual confirmation showing if the meter is ready to measure or not
• Operating support for 12 languages with information shown in complete words and sentences
• Easy 1 point calibration with option of manual cell constant entry
• 3 predefined standards and 1 user defined standard
• Automatic, manual and time dependant endpoint recording
• Data memory storage for 2000 GLP data points with weatherproof Micro-USB connection for data export
• Power requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulators

Scope of supply:
S7-Meter: Includes instrument, LabX direct pH, USB cable, electrode clip, base accessory, operating instructions, quick guide, test certificate, declaration of conformity, batteries
S7-Standard kit: As S7-Meter, but also with InLab 738-ISM and sachets of conductivity standard 1413 µS/cm and 12.88 mS/cm
S7-Field kit: As S7-Standard kit, but also with bottles for calibration, uGo™ carrying case
S7-USP/EP kit: As S7-Field kit, but with InLab 742-ISM instead of InLab 738-ISM

Specifications
Conductivity Measuring range: Resolution: Accuracy:	0.010 µS/cm ... 1000 mS/cm 0.001 ... 1 (auto-range) ±0.5 %
Temperature Measuring range: Resolution: Accuracy:	-5,0 ... 105 °C 0.1 °C ±0.1 °C
TDS Measuring range: Resolution: Accuracy:	0.01 mg/l ... 600 g/l 0.01 ... 1 (auto-range) ±0.5 %
Specific resistance Measuring range:	0.01 ... 100.0 MΩcm
Salinity Measuring range:	0.01 ... 42 psu
Conductivity Ash Measuring range:	0.01 ... 2022 %
Dimensions (W x D x H):	222 x 70 x 35 mm

Plastic dispersing heads: Autoclavable. Stainless steel dispersing heads: Ultimate fineness: emulsions 1µm to 10µm and suspensions 5µm to 50µm, sterilisable by all methods. ST tools are recommended for use with tissue and other fibrous materials.

The model S900 offers a bench-top solution with OptiOx™ technology: the optical measurement of dissolved oxygen. Thanks to OptiOx™, measuring dissolved oxygen is easier than ever before. For applications where the traditional polarographic measurement is preferred the S600-Kit is recommended. Optical oxygen measurement is superior to conventional technologies. OptiOx™ is fast, precise and produces highly reproducible results. Because of the optical measuring principle used, the oxygen is not chemically consumed during the measurement, which makes stirring the sample superfluous. The InLab OptiOx™ requires no polarization time, meaning you can start your measurement immediately. In addition, the whole measuring system has a high level of stability making calibration rarely necessary.

Scope of supply:
S900-Basic: Includes instrument, DO/BOD expansion unit, 2 blank expansion units, uPlace™ electrode holder, semitransparent cover, operating instructions, installation and quick guide, LabX^® direct pH PC software, declaration of conformity, test certificate
S900-Kit: As S900-Basic but with InLab^® OptiOx™, guide to DO measurement, zero oxygen tablets
S900-BOD: As S900-Kit, also including BOD adapter
S600-Kit: As S900-Kit, but with InLab^® 605-ISM instead of InLab^® OptiOx™

Specifications
Measuring range (O2 Saturation):
InLab® OptiOx™: InLab® 605-ISM: Resolution:	0.0 ... 500 % 0.0 ... 600 % 0.1
Measuring range (O2concentration)
InLab® OptiOx™: InLab® 605-ISM: Resolution:	0.000 ... 50 mg/l (ppm) 0.00 ... 99 mg/l (ppm) 0.001 / 0.01 / 0.1
Accuracy
InLab® OptiOx™:	±0.1 mg/l from 0 to 8 mg/l ±0.2 mg/l from 8 to 20 mg/l ±10 % from 20 to 50 mg/l
InLab® 605-ISM:	±0.5 %
Measuring range (Pressure): Resolution: Accuracy:	500 ... 1100 mbar 1 ±2
Calibration points:	2
Sensor input
InLab® OptiOx™: InLab® 605-ISM:	MiniLTW (IP67) BNC
Pressure compensation:	Automatic / manual

Accessories Electrolyte solution for InLab® 605

Simultaneously measure pH and temperature with a pocket sized tester designed to provide accurate measurements on the go for a variety of applications. The Pocket Tester Elite pH has a leakproof, transparent wide-base cap for upright standing with fill line indicator. The Elite pH Spear pocket tester features a spear tip open pore sensor. This rugged and user-friendly tester is ideal for direct measurement of solid or semi-solid samples.

• 1-push calibration
• Large 4-digit double line display
• Backlit graphic display
• Auto-hold readings
• Easy-to-operate, intuitive keypad
• Auto-off

Scope of supply:
Elite pH and Elite pH Spear: Tester incl. batteries, lanyard
Elite pH Kit and Elite pH Spear Kit: Tester incl. batteries, laynard, soft carry case, buffer sachets set (pH 4.01, 7.00, 10.01, deionized water, 5 x 20 ml each)

Specifications	Elite pH // pH Spear
pH range: Resolution: Accuracy:	-1.00 ... 15.00 0.01 pH ±0.01 pH ±1 LSD
pH calibration points:	1 ... 3 points
Temperature range:	0 ... 60 °C
Resolution:	0.1 °C
Accuracy:	0 ... 50 °C (±0.5 °C + 1 LSD) 50 ... 60 °C (±1.0 °C + 1 LSD)
Operating temperature: Relative humidity:	5 ... 45 °C 5 ... 85 %, non-condensing
Temperature compensation:	ATC // MTC
Dimensions (W x L x H): Weight:	200 x 45 x 36 mm // 280 x 45 x 36 mm 160 g // 150 g
Power supply:	4 x AAA 1.5 V batteries
IP code:	IP 67

Professionel pH and conductivity meter for mobile measurements. The Multi 3320 for the measurement of pH, ORP, conductivity and dissolved oxygen (electro-chemical) is an ideal meter for environmental applications in the areas of ground and surface water measurement, in aquatic cultures as well as in wastewater treatment plants and much more. The Multi 3320 has a robust waterproof housing (IP 67) and memory with data logger with adjustable interval between 1 s and 60 min. The keypad can also be operated when wearing gloves and is easy to clean under a water jet.

• Two inputs for simultaneous measurement of pH and conductivity or pH and dissolved oxygen
• Backlit graphic display for parallel output of measured values
• All conventional WTW pH electrodes, combined ISE electrodes, conductivity measuring cells and galvanic oxygen sensors can be connected to the meter
• Waterproof USB interface

Scope of supply Multi 3320 Set 1: Meter in field case with SenTix^® 41, CellOx^® 325, TetraCon^® 325, sensor accessories, manual, stand, beaker, CD-ROM, driver software for USB, batteries, cable

Specifications
Measuring range / Resolution
pH:	-2.000 … 19.999 ± 0.005 pH
mV:	-2500 ... +2500 ± 1 mV
ISE (mg/l, µmol/l, mg/kg, ppm, %):	0.000 … 999999
O2 concentration:	0,00 ... 20,00 mg/l or 0,0 ... 90,0 mg/l*
O2 saturation:	0,00 ... 200,0 % or 0,0 ... 600 %*
O2 partial pressure:	0,0 ... 200,0 hPa, 0 ... 1250 hPa*
Conductivity:	0.000 µS/cm ... 1000 mS/cm
Salinity:	0.0 ... 70.0
TDS:	0 mg ... 199.9 g/l
Temp.:	-5.0 … 105.0 °C ± 0.1 °C
Memory:	manually 200/5000 automatically
Power supply:	4 x 1.5 V AA or 4 x 1.2 V NiMH battery
IP code:	IP 67

Accessories Conductivity cell probes Accessories Conductivity cell probes

• For determination of the relative salt content in fluid and semi-solid food products, such as meat, cold cuts, cheese, salads etc. The measurement is performed by determination of the electrical conductivity, as it is dependent on the salt content. Easy handling, robust and impact-resistant. With 2-conductor measuring probe with gold plated electrodes and silicone cable. Case included.

Specifications
Measuring range: Accuracy: Resolution	0 ... 100 ±1 digit 1 digit
Operating Temperature:	10 ... 40 °C
Sample Rate:	1 ... 15 s, adjustable
Dimensions:	100 x 46 x 25 mm
Weight:	Approx. 200 g
Power supply:	Lithium 3 V / 1 Ah, Type CR2477
IP code:	IP 54

For simple removal of liquid samples.

• Good view due to transparent tubes
• Upper end with reflux valve, lower end with ball valve
• All-layer and point sampling possible
• 500 ml dip sampler stepless extendable

ZU 6985: 4-pole conductivity probe with integral temperature sensor
ZU 6945: Calibration solution for analysis and control of cell constant (1 ampoule produces 1 litre of 0.1 N salt solution)

Portavo 902 Cond

• The basic version for mobile conductivity measurement
• Robust, intuitive portable device for routine daily measurements in laboratories and processes
• A sensor quiver protects the sensor from drying out or being damaged in daily use
• The high-performance polymer housing ensures low water absorption and high impact resistance
• Over 1000 hours of measurement with a single set of batteries (4 x AA)
• Memosens sensors and analog sensors can be used on the same device
• The mineral glass display is perfectly readable even after years

Portavo 904 Cond
as Portavo 902 Cond, additionally with:

• Li-ion battery
• Data logger with 5,000 values
• Micro USB port and Paraly SW 112 software

Portavo 904 X Cond
as Portavo 904 Cond, additionally with:

• Conductivity measurement with ATEX approval for measurements up to Zone 0/1. Ideal for applications in the process industry. For the first time, Portavo enables direct on-site testing of process measuring points.
• The new MemoLog function allows the user to log calibration data from various Memosens measuring points

Specifications
Measuring range (Accuracy):	0.001 µS/cm (c<0.05 cm-1) 0.01 µS/cm (c=0.05 ... 0.2 cm-1) 0.1 µS/cm (c>0.2 cm-1)
TDS: Salinity:	0 ... 1999 mg/l 0.0 ... 45.0 g/kg
Resistivity: Concentration:	00.00 ... 99.99 MO x cm 0.00 ... 9.99 (w/w) %
Conductivity input, analog:	Multi-contact for 2-/4-electrode sensors with integrated temp detector
Measuring ranges Sensor SE 202: Sensor SE 204:	0.01 ... 200 µS/cm 1 µS/cm ... 500 mS/cm
2-electrode sensors: 4-electrode sensors:	0.1 µS x c ... 200 mS x c 0.1 µS x c ... 1000 mS x c
Temperature input:	2 x 4 mm diam. for integrated or separate temperature detector
Messbereich mit NTC 30 kO: Messbereich mit Pt 1000:	-20 ... 120 °C -40 ... 250 °C
Conductivity input, Memosens:	M8 socket, 4 pins, for Memosens lab cable
Measuring range sensor SE 215 MS:	10 µS/cm ... 20 mS/cm
Conductivity input
Temperature compensation:	Linear 0 ... 20 %/K, reference temperature adjustable
nLF:	0 ... 120 °C
Power supply: Protection class acc. to DIN EN 60529:	4 x AA IP66/67 with pressure compensation

Laboratory conductivity sensor with 2 electrodes, electrode and body material 1.4571 stainless steel, connector head POM. , incl. flow through beaker.

Specifications
Measuring range:	0.01 ... 199.9 µS/cm
Temperature range:	-5 ... 100 °C
Temperature sensor:	NTC 30 KOhm / 25 °C
Body length / diam.:	120 mm / 12 mm
Immersion depth:	30 ... 120 mm

Laboratory conductivity sensor with 4 electrodes, graphite electrode material, epoxy body material.

Specifications
Measuring range:	1 µS/cm ... 500 mS/cm
Temperature range:	-5 ... 100 °C
Temperature sensor:	NTC 30 KOhm / 25 °C
Body length / diam.:	120 mm / 15.3 mm
Immersion depth:	36 ... 120 mm

The Elite CTS pocket tester simultaneously displays conductivity/TDS/salinity with temperature. Available with Pin or with Cup Sensor. With leakproof, transparent wide-base cap for upright standing with fill line indicator.

• 1-push calibration
• Large 4-digit double line display
• Backlit graphic display
• Auto-hold readings
• Easy-to-operate, intuitive keypad
• Auto-off

Scope of supply:
Elite CTS Pin/Cup: Tester incl. batteries, laynard
Elite CTS Pin/Cup Kit: Tester incl. batteries, laynard, soft carry case, CTS conductivity Standard Sachets (5 x 1413 µS/cm KCl and 5 x 2764 µS/cm KCl)

Specifications
Conductivity range:	0.0 … 200.0 µS / 200 … 2000 µS / 2.00 … 20.00 mS
Resolution:	0.1 µS / 1 µS / 0.01 mS
Accuracy: Calibration points:	± 1 % full scale 1 ... 3 points
TDS range:	0.0 … 100.0 ppm / 100 ... 1000 ppm / 100 ... 10000 ppm
Resolution:	0.1 ppm / 1 ppm / 10 ppm
Accuracy: Calibration points:	± 1 % full scale 1 ... 3 points
Salinity range: Resolution: Accuracy:	0 … 10000 ppm 100 ppm ± 1 % full scale
Calibration points:	1 point
Temperature range: Resolution:	0 … 60.0 °C 0.1 °C
Accuracy:	0 … 50 °C (±0.5 °C + 1 LSD) 50 … 60 °C (±1.0 °C + 1 LSD)
Operating temperature: Relative humidity:	5 … 45 °C 5 … 85 %, non-condensing
Temperature compensation:	ATC
Dimensions (W x L x H): Weight Elite CTS Pin/Cup:	202 x 45 x 36 mm 160 g / 150 g
Power supply: IP code:	4 x AAA 1.5 V batteries IP 67

The Elite PCTS pocket tester simultaneously displays pH, conductivity/TDS/salinity with temperature. With leakproof, transparent wide-base cap for upright standing with fill line indicator.

• 1-push calibration
• Large 4-digit double line display
• Backlit graphic display
• Auto-hold readings
• Easy-to-operate, intuitive keypad
• Auto-off

Scope of supply:
Elite PCTS: Tester incl. batteries, lanyard
Elite PCTS Kit: Tester incl. batteries, lanyard, soft carry case, buffer sachet set (pH 4.01, 7.00, 10.01, deionized water, 5 x 20 ml each), CTS conductivity Standard Sachets (5 x 1413 µS/cm KCl and 5 x 2764 µS/cm KCl)

Specifications
pH range: Resolution: Accuracy: Calibration type:	-1.00 ... 15.00 0.01 ±0.01 + 1 LSD point to point
Conductivity:	0.0 ... 200.0 µS / 200 ... 2000 µS / 2.00 ... 20.00 mS
Resolution: Accuracy: Calibration points:	0,1 µS / 1 µS / 0,01 mS ±1 % full scale 1 ... 3 points
TDS:	0.0 ... 100.0 ppm / 100 ... 1000 ppm / 0.10 ... 10.00 ppt
Resolution: Accuracy:	0.1 ppm / 1 ppm / 0.01 ppt ±1 % full scale
Calibration points:	1 ... 3 points
Salinity: Resolution: Accuracy:	0.00 ... 10.00 ppt 0.10 ppt ±1 % full scale
Calibration points:	1 point
Temperature range: Resolution:	0 ... 60.0 °C 0.1 °C
Accuracy:	0 ... 50 °C (±0.5 °C + 1 LSD) 50 ... 60 °C (±1.0 °C + 1 LSD)
Operating temperature: Relative humidity:	5 ... 45 °C 5 ... 85 %, non-condensing
Temperature compensation:	ATC
Dimensions (W x L x H): Weight:	200 x 45 x 36 mm 160 g
Power supply: IP code:	4 AAA 1.5 V batteries IP 67

The HQ Series is for water quality professionals who want to perform electrochemical analysis for field and lab environments.
They provide a true rugged, field-ready solution with on-screen, visual step-by-step operating guidance that provides users with confidence in reporting and managing their results. Unlike other field meters with basic user interfaces and without easily accessible data, the HQ Series secures, simplifies, and accelerates the complete measurement process for field users.

• Easy calibration
• Sensors designed for every application available

Pt 1000 temperature probe for fast response temperature measurements. Accuracy class A acc. to DIN IEC 751.

The Lovibond^® Model Fx solves the problem of measuring the colour of edible oils and fats with its unique ability to not only keep the oil at a constant temperature but also to measure and report on the temperature of the sample, avoiding any misreading from crystallisation. The oils can now be measured in their natural and correct state.

• Avoids misreading from crystallisation
• Measures Lovibond^® RYBN, Lovibond RY10:1, AOCS RY, Chlorophyll & b-Carotene
• Allows the Measurement of Hot Samples (Integrated Heater)
• Ensured Compliance to Standards

Scope of supply: Colorimeter, W600/B/1" cell (borosilicate, 1" path length), W600/B/5¼" cell (borosilicate, 5¼" path length), external power supply, quick start guide (hard copy), USB memory stick (containing the manuals), certificate of conformity

Specifications
Wavelength Range:	380 ... 780 nm
Accuracy:	± 0.2 nm
Spectral Scope:	< 15 nm
Photometric Range:	0 ... 100 % T
Linearity:	± 0.01 % T
Stray light:	< 0.01 % T
Interfaces:	USB, RS 232
Dimensions (W x D x H):	301 x 152 x 331 mm
Weight:	516 g

The portable instrument with data logger is ideal for determining electrical conductivity in aqueous media. With a simple keystroke, further parameters such as TDS, salinity or resistance can be selected and conveniently read off. The selection of different measuring cells allow the determination of low (< 200 µS/cm) and very high conductivities (< 1000 mS/cm) with highest precision.

• Automatic recognition of conductivity standards
• Alarm function with adjustable limit values
• Auto hold function
• Selectable reference temperature (20 °C / 25 °C)
• Automatic temperature compensation
• Battery status indicator
• Low power consumption
• Data transfer and evaluation via software possible

Scope of supply:
SD 325 CON (Set 1): Conductivity meter, protective covering, transport case, 4-pol graphite electrode (diam. 12 mm, < 200 mS/cm), conductivity standards, batteries, manual
SD 325 CON (Set 2): Conductivity meter, protective covering, transport case, 4-pol graphite electrode (diam. 16 mm, < 1000 mS/cm), conductivity standards, batteries, manual
SD 325 CON (Set 3): Conductivity meter, protective covering, transport case, 2-pol stainless steel electrode (diam. 10 mm, < 200 µS/cm, pure water), flow through cell for pure water, batteries, manual

Specifications
Conductivity:	0.000 ... 1000.0 mS/cm
Temperature:	-5.0 ... 100.0 °C
TDS:	0.000 ... 5000 mg/l
Resistance:	0.000 ... 50.0 MOhm/cm
Salinity:	0.0 ... 70.0 PSU
Datalogger:	10000 Data sets automatically 1000 Data sets manually
Interface:	USB
Dimensions (W x D x H):	100 x 164 x 37 mm
Weight:	302 g
Power supply:	2 x AAA batteries (incl.)
IP code:	IP 67

Accessories Electrodes for Conductivity meter SD 325 CON Accessories Calibration solution for Conductivity meter SD 325 CON

Waterproof and rugged conductivity meters with manual or automatic ranging options. Suitable for water and wastewater treatment, e.g. drinking water treatment, aquariums and fish farms, swimming pools and agriculture.

• User-replaceable SS316 stainless steel sensor element
• Up to 3 conductivity ranges, ECTestr^® 11 with 2 ranges
• Up to 3 calibration points
• Automatic or manual ranging capabilities
• With temperature display
• Calibration settings remain, even when you run out of batteries
• Waterproof and dustproof housing
• Large LCD display

Specifications	ECTestr® 11+ // ECTestr® 11
Range:	0 … 200.0 µS/cm // - 0 … 2000 µS/cm // 2000 µS/cm 0 … 20.00 mS/cm // 20.00 mS/cm
Resolution:	0.1 µS/cm // - 1 µS/cm // 10 µS/cm 0.01 mS/cm // 0.10 mS/cm
Accuracy:	±1 % full scale of each range
Calibration points:	3 / 3 // 2 / 2
Temperature range:	0 … 50 °C
Temperature resolution:	0.1 °C
Temperature calibration window:	±5 °C
Power supply:	4 x 1.5 V A76 batteries
IP code:	IP 67
Dimensions (W x D):	165 x 38 mm
Weight:	90 g

The reagent bottle is particularly suited for storing, packing, taking samples, sampling and transport of granules and paste-like media.

• HDPE, transparent
• PP tamper-evident screw cap, blue
• UN approval for bulk goods

Accessories ChemoSampler, accessory extension rod

Sturdy bottle with wide-necked opening and screw cap. Particularly suitable for viscous media, powder, granules and pastes. Leakproof. Individual customer-specific printing possible.

Alternative LLG-Wide-mouth bottles, with screw cap, LDPE