Alkaliczny uniwersalny środek czyszczący przeznaczony do gruntownego czyszczenia ultradźwiękowego sprzętów medycznych i stomatologicznych oraz sprzętu laboratoryjnego ze szkła, stali, tworzyw sztucznych, ceramiki. Czyści również korony, nierdzewne dentystyczne tace wyciskowe. Usuwa krew, ślinę, pozostałości białkowe i kostne, tłuszcze, oleje, pasty szlifierskie i polerskie. 
Nie nadaje się do stopów aluminium, cynku i metali lekkich oraz do tworzyw sztucznych podatnych na pękanie pod wpływem naprężeń (np. ABS lub PC).

Stężenie:	5 % w wodzie o temperaturze 50 ... 80° C
Właściwości fizykochemiczne:
Gęstość:	1,05 g/ml
pH (koncentrat):	12 ... 12.5
Składniki:	<5% niejonowe środki powierzchniowo czynne, <5% fosforany

Alkaline cleaning concentrate for the cleaning of organic and inorganic alkali-proof spectacles, moulds and high precision optics, gemstones, quartz, ceramics and selected plastics. Also for steel, iron steel and titanium surfaces. For the removal of resin, putty/glue, adhesives and traces of selected organic plastics from moulds (e.g. CR 39). Check plastics for compatibility before use. Do not use for light metal (Al, Mg), zinc and tin surfaces.

Application concentration:	10 .. 50 % in water, 60 ... 85 ° C
Physico-chemical data:
Density:	1.07 g/ml
pH (1 % solution):	12
Ingredients:	<5 % amphoteric surfactants, <5 % phosphates

Universally applicable neutral cleaning concentrate with corrosion inhibitor for laboratories and workshops. It as been developed in particular for use in ultrasonic baths. For cleaning of laboratory equipment and instruments made of sensitive materials and glass, plastics, metals and rubber. It removes contamination such as dust, finger prints, pigments, light greases and oils.

Application concentration:
Ultrasonic bath:	2 ... 5 %, 20 ... 80 °C
Immersion bath:	5 ... 20 %
Physico-chemical data:
Density:	1.04 g/ml
pH (concentrate):	~7
Ingredients:	5 ... 15 % anionic surfactants, 15 ... 30 % non-ionic surfactants, <5 % soaps, <5 % phosphates

Alkaliczny uniwersalny koncentrat czyszczący do sprzętów laboratoryjnych i elementów roboczych wykonanych ze szkła, tworzyw sztucznych odpornych na działanie zasad, ceramiki, gumy (doskonały do masek oddechowych), metali, metali kolorowych, także metali lekkich. Usuwa zanieczyszczenia takie jak: oleje, tłuszcze i smary, kurz, sadze, koksowanie itp.

Stężenie: Myjka ultradźwiękowa: Łaźnia zanurzeniowa:	1 ... 5 % w wodzie, 20 ... 80 °C 5 ... 10 %
Właściwości fizykochemiczne:
Gęstość:	1,132 g/ml
pH (koncentrat):	~13
Składniki:	5 ... 15 % anionowych środków powierzchniowo czynnych, <5% amfoterycznych środków powierzchniowo czynnych, 5 ... 15 % fosforanów

Alkaliczny koncentrat czyszczący z amoniakiem do laboratorium i warsztatu. Do usuwania cząstek brudu, olejów i smarów, pozostałości skóry, pozostałości po szlifowaniu, polerowaniu i docieraniu. Czyści ceramikę i szkło oraz narzędzia i instrumenty. Rozjaśnia metale szlachetne i nieżelazne. Można zaatakować cynk, aluminium i stopy metali lekkich.

Stężenie jednej aplikacji:
Myjka ultradźwiękowa:	5 ... 10 %, 20 ... 50 °C
Zlew:	10 ... 15 %, 20 ... 50 °C
Właściwości fizykochemiczne:
Gęstość:	0,99 ... 1,00 g/ml
pH (koncentrat):	10.5 ... 11
Składniki:	5 ... 15 % anionowych środków powierzchniowo czynnych, 5 ... 15 % niejonowych środków powierzchniowo czynnych, 5 ... 15 % mydła amonowego

Mildly alkaline, foam-inhibited cleaning concentrate for dip and splash cleaning of laboratory instruments made of metal, glass, ceramic, plastic materials and for glassware. Removes gentle markings, labels, lime soap deposits, greases and oils (incl. greases for ground-glass joints, weakly resinified greases).
Check aluminium, magnesium and generally alloys of light-metals before application.

Application concentration:
Ultrasonic bath:	~1 vol-%, 50 ... 75 °C
Splash cleaning:	~0.5 vol-%, >55 °C
Physico-chemical data:
Density:	~1.08 g/ml
pH (concentrate):	~11.4
Ingredients:	5 ... 15 % amphoteric surfactants, 5 ... 15 % non-ionic surfactants, <5 % phosphates, <5 % polycarboxylates

Strongly alkaline, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of alkali-resistant parts and laboratory instruments, made of metal (including titanium), glass, ceramic and plastic. Removes biological contaminants, grease, oil, abrasives and polishing pastes, resinified and tarry residues, marker and label residues.
Not suitable for aluminium, magnesium, alloys of light metals and alkali-sensitive glass. Risk of tarnishing when used for nonferrous metals.

Application concentration:
Ultrasonic bath:	1 ... 2 vol-%, 50 ... 75 °C
Splash cleaning:	0.5 ... 1 vol-%, >55 °C
Immersion bath:	~4 vol-%
Physico-chemical data:
Density:	~1.14 g/ml
pH (1 % solution):	12 ... 12.5
Ingredients:	5 ... 15 % amphoteric surfactants, 5 ... 15 % non-ionic surfactants, <5 % phosphates, <5 % polycarboxylates

Neutral, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of sensitive parts and laboratory instruments made of metal (incl. aluminium and light metal alloys), glass, ceramic and plastic. Removes gentle emulsions, marking and label residues, lime soap deposits, light greases and oils.
Check magnesium alloys before application.

Application concentration:
Ultrasonic bath:	~2 vol-%, 30 ... 75 °C
Splash cleaning:	~1 vol-%, >55 °C
Immersion bath:	~4 vol-%
Physico-chemical data:
Density:	~1.059 g/ml
pH (concentrate):	~7.1
Ingredients:	5 ... 15 % anionic surfactants, 5 ... 15 % non-ionic surfactants, <5 % phosphates, <5 % polycarboxylates

Mildly acidic concentrate for cleaning of laboratory instruments and work pieces. It is suitable for ultrasonic cleaning of stainless steel, non-ferrous and light metals e.g. aluminium, glass and plastics as well as for the passivation of stainless and or chromium-alloyed steels. Brass and copper alloys are brightened up. Removes mineral grease and oil, oxide layers, rust and lime.

Application concentration:	1 .. 5 % in water, 30 ... 80 ° C
Physico-chemical data:
Density:	1.082 g/ml
pH (concentrate):	1.6
Ingredients:	<5 % anionic surfactants, <5 % non-ionic surfactants, benzisothiazolinone (<5 ppm), methylisothiazolinone (<5 ppm)

Acidic, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of acid-resistant medical and laboratory instruments made of stainless steel, glass, ceramic and plastic. Removes mineral contamination like lime scales, lime soaps, metal oxides and flux residues after soldering, mineral oils and greases.
Not suitable for aluminium, magnesium and light metal alloys. Check acid-sensitive glassy materials before application.

Application concentration:
Ultrasonic bath:	~1 ... 2 vol-%, 50 ... 75 °C
Splash cleaning:	~0.5 vol-%, >55 °C
Immersion bath:	>2 vol-%
Physico-chemical data:
Density:	1.32 g/ml
pH (concentrate):	<1
Ingredients:	15 ... 30 % non-ionic surfactants, >30 % phosphates (phosphoric acid)

Noise protection box with quiet fan and optimal insulation guarantees low-noise cleaning. Any vapours are exhausted via a silenced drain to prevent heat or moisture build-up inside the box. The interior lighting and glass door allow to observe the cleaning process.

• Noise is reduced by max. 85 %
• Box can be opened from the top and front
• Laterally arranged halogen lamps
• Stainless steel jacket

Scope of supply: Noise protection box, bottom tray with gland plate, power supply, manual

For use with: Elmasonic Easy 10/20/30/40/60/100/120/180, Elmasonic Select 30/40/60/100/120/180, Elmasonic P 30/60/120/180

Noise protection box with quiet fan and optimal insulation guarantees low-noise cleaning. Any vapours are exhausted via a silenced drain to prevent heat or moisture build-up inside the box. The interior lighting and glass door allow to observe the cleaning process.

• Noise is reduced by max. 85 %
• Box can be opened from the top and front
• Laterally arranged halogen lamps
• Stainless steel jacket

Scope of supply: Noise protection box, 2 bottom trays with gland plate, splash plate, power supply, manual

For use with: Elmasonic Easy 300, Elmasonic Select 80/150/300, Elmasonic P 70/300

Alkaline ultrasonic cleaning concentrate. It cleans surfaces made of stainless steel, ferrous metals, titanium and precious metals after mechanical treatment. Removes residues of lapping, polishing and grinding media, of punching oil, drawing grease and high-performance cooling lubricants.
Not applicable for aluminium and light metals.

Application concentration:	3 .. 8 % in water, 50 ... 80 ° C
Physico-chemical data:
Density:	1.122 g/ml
pH (concentrate):	13.1
Ingredients:	5 ... 15 % anionic surfactants, <5 % non-ionic surfactants, <5 % amine-soaps, <5 % phosphates.

Alkaline cleaning concentrate for laboratories and workshops. Suitable for cleaning of surfaces made of metal, glass, ceramics, plastics and rubber. Also suitable for inspectional cleaning (e.g. protection masks). Removes cooling lubricant emulsions, lapping and polishing residues, oils, greases, soot and dust. For most mineral oils and
greases demulsifying.
Check light metal alloys of the type AlSiMg for compatibility before use.

Application concentration:Ultrsonic bath:Immersion bath:	2 ... 5 %, 50 ... 80 ° C ~5 ... 10 %
Physico-chemical data:
Density:	1.132 g/ml
pH (concentrate):	~13
Ingredients:	5 ... 15 % anionic surfactants, <5 % amphoteric surfactants, 5 ... 15 % phosphates

Alkaline ultrasonic cleaner powder suitable for metal, cast iron, die-cast zinc, aluminium, plastic and rubber surfaces. Removes scaled/gummy oils and greases, waxes, lacquer and paint residues, grinding and polishing agents.
Not suitable for plastics that are not alkali-proof or that are susceptible for stress cracking. Check magnesium alloys and coatings for compatibility.

Application concentration:	3 ... 5 weight %, 50 ... 80 °C
Physico-chemical data:
Bulk density:	0.920 g/ml
pH (1 % solution):	~12
Ingredients:	5 ... 15 % anionic surfactants, <5 % non-ionic surfactants, >30 % phosphates

Neutral cleaning concentrate suitable for gentle ultrasonic cleaning of ensembles made from metal, light and precious metals, plastic, glass, ceramics and rubber. Removes oil, grease, polishing, lapping and abrasive materials, dust and fingerprints.
Free of alkalies and acids, without smell and biodegradable.

Application concentration:Ultrasonic bath:Immersion bath:	5 %, 50 ... 80 °C10 %, 50 ... 80 °C
Physico-chemical data:
Density:	1.07 g/ml
pH (concentrate):	~9
Ingredients:	15 ... 30 % anionic surfactants, <5 % non-ionic surfactants, 2-bromo-2-nitropropane-1,3-diol (~35 ppm)

Mildly acid cleaning concentrate suitable for non-ferrous metals, aluminium, stainless steels, plastics and glass as well as for the passivation of surfaces of stainless and chromium-containing steels. Brass and copper alloys are brightened up.
Removes polishing media, mineral grease and oil, oxide layers, rust and lime.

Application concentration:	1 .. 5 % in water, 30 ... 80 ° C
Physico-chemical data:
Density:	1.082 g/ml
pH (concentrate):	1.6
Ingredients:	<5 % anionic surfactants, <5 % non-ionic surfactants, benzisothiazolinone (<5 ppm), methylisothiazolinone (<5 ppm)