Alkaline Universal Cleaner suitable for the thorough ultrasonic cleaning of medical and dental instruments and laboratory equipment made of glass, steel, plastics, ceramics. Cleans also crowns, stainless-steel dental impression trays. Removes blood, saliva, protein- and bone residuals, fats, oils, grinding and polishing pastes.
Not suitable for aluminum, zinc or light metal alloys and for plastics that are susceptible for stress cracking (e.g. ABS or PC).

Application concentration:	5 % in water at 50 ... 80° C
Physico-chemical data:
Density:	1.05 g/ml
pH (concentrate):	12 ... 12.5
Ingredients:	<5% non-ionic surfactants, <5% phosphates

Alkaline cleaning concentrate for the cleaning of organic and inorganic alkali-proof spectacles, moulds and high precision optics, gemstones, quartz, ceramics and selected plastics. Also for steel, iron steel and titanium surfaces. For the removal of resin, putty/glue, adhesives and traces of selected organic plastics from moulds (e.g. CR 39). Check plastics for compatibility before use. Do not use for light metal (Al, Mg), zinc and tin surfaces.

Application concentration:	10 .. 50 % in water, 60 ... 85 ° C
Physico-chemical data:
Density:	1.07 g/ml
pH (1 % solution):	12
Ingredients:	<5 % amphoteric surfactants, <5 % phosphates

Universally applicable neutral cleaning concentrate with corrosion inhibitor for laboratories and workshops. It as been developed in particular for use in ultrasonic baths. For cleaning of laboratory equipment and instruments made of sensitive materials and glass, plastics, metals and rubber. It removes contamination such as dust, finger prints, pigments, light greases and oils.

Application concentration:
Ultrasonic bath:	2 ... 5 %, 20 ... 80 °C
Immersion bath:	5 ... 20 %
Physico-chemical data:
Density:	1.04 g/ml
pH (concentrate):	~7
Ingredients:	5 ... 15 % anionic surfactants, 15 ... 30 % non-ionic surfactants, <5 % soaps, <5 % phosphates

Alkaline universal cleaning concentrate for laboratory instruments and work pieces made of glass, alkaline-resistant plastics, ceramics, rubber (excellent for breathing masks), metals, non-ferrous metals, also light metals. It removes contaminations such as oils, fats and greases, dust, soot, cokings, etc.

Application concentration Ultrasonic bath: Immersion bath:	1 ... 5 % in water, 20 ... 80 °C 5 ... 10 %
Physico-chemical data:
Density:	1.132 g/ml
pH (concentrate):	~13
Ingredients:	5 ... 15 % anionic surfactants, <5% amphoteric surfactants, 5 ... 15 % phosphates

Alkaline cleaning concentrate with ammonia for laboratory and workshop. For removing dirt particles, oil and greases, skin residues, grinding, polishing and lapping residues. Cleans ceramics and glassware as well as instruments/tools. Brightens precious and non-ferrous metals. Zinc, aluminium and light metal alloys may be attacked.

Application concentration:
Ultrasonic bath:	5 ... 10 %, 20 ... 50 °C
Soaking bath:	10 ... 15 %, 20 ... 50 °C
Physico-chemical data:
Density:	0.99 ... 1.00 g/ml
pH (concentrate):	10.5 ... 11
Ingredients:	5 ... 15 % anionic surfactants, 5 ... 15 % non-ionic surfactants, 5 ... 15 % ammoniumsoap

Mildly alkaline, foam-inhibited cleaning concentrate for dip and splash cleaning of laboratory instruments made of metal, glass, ceramic, plastic materials and for glassware. Removes gentle markings, labels, lime soap deposits, greases and oils (incl. greases for ground-glass joints, weakly resinified greases).
Check aluminium, magnesium and generally alloys of light-metals before application.

Application concentration:
Ultrasonic bath:	~1 vol-%, 50 ... 75 °C
Splash cleaning:	~0.5 vol-%, >55 °C
Physico-chemical data:
Density:	~1.08 g/ml
pH (concentrate):	~11.4
Ingredients:	5 ... 15 % amphoteric surfactants, 5 ... 15 % non-ionic surfactants, <5 % phosphates, <5 % polycarboxylates

Strongly alkaline, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of alkali-resistant parts and laboratory instruments, made of metal (including titanium), glass, ceramic and plastic. Removes biological contaminants, grease, oil, abrasives and polishing pastes, resinified and tarry residues, marker and label residues.
Not suitable for aluminium, magnesium, alloys of light metals and alkali-sensitive glass. Risk of tarnishing when used for nonferrous metals.

Application concentration:
Ultrasonic bath:	1 ... 2 vol-%, 50 ... 75 °C
Splash cleaning:	0.5 ... 1 vol-%, >55 °C
Immersion bath:	~4 vol-%
Physico-chemical data:
Density:	~1.14 g/ml
pH (1 % solution):	12 ... 12.5
Ingredients:	5 ... 15 % amphoteric surfactants, 5 ... 15 % non-ionic surfactants, <5 % phosphates, <5 % polycarboxylates

Neutral, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of sensitive parts and laboratory instruments made of metal (incl. aluminium and light metal alloys), glass, ceramic and plastic. Removes gentle emulsions, marking and label residues, lime soap deposits, light greases and oils.
Check magnesium alloys before application.

Application concentration:
Ultrasonic bath:	~2 vol-%, 30 ... 75 °C
Splash cleaning:	~1 vol-%, >55 °C
Immersion bath:	~4 vol-%
Physico-chemical data:
Density:	~1.059 g/ml
pH (concentrate):	~7.1
Ingredients:	5 ... 15 % anionic surfactants, 5 ... 15 % non-ionic surfactants, <5 % phosphates, <5 % polycarboxylates

Mildly acidic concentrate for cleaning of laboratory instruments and work pieces. It is suitable for ultrasonic cleaning of stainless steel, non-ferrous and light metals e.g. aluminium, glass and plastics as well as for the passivation of stainless and or chromium-alloyed steels. Brass and copper alloys are brightened up. Removes mineral grease and oil, oxide layers, rust and lime.

Application concentration:	1 .. 5 % in water, 30 ... 80 ° C
Physico-chemical data:
Density:	1.082 g/ml
pH (concentrate):	1.6
Ingredients:	<5 % anionic surfactants, <5 % non-ionic surfactants, benzisothiazolinone (<5 ppm), methylisothiazolinone (<5 ppm)

Acidic, foam-inhibited cleaning concentrate for ultrasonic, immersion and splash cleaning of acid-resistant medical and laboratory instruments made of stainless steel, glass, ceramic and plastic. Removes mineral contamination like lime scales, lime soaps, metal oxides and flux residues after soldering, mineral oils and greases.
Not suitable for aluminium, magnesium and light metal alloys. Check acid-sensitive glassy materials before application.

Application concentration:
Ultrasonic bath:	~1 ... 2 vol-%, 50 ... 75 °C
Splash cleaning:	~0.5 vol-%, >55 °C
Immersion bath:	>2 vol-%
Physico-chemical data:
Density:	1.32 g/ml
pH (concentrate):	<1
Ingredients:	15 ... 30 % non-ionic surfactants, >30 % phosphates (phosphoric acid)

Noise protection box with quiet fan and optimal insulation guarantees low-noise cleaning. Any vapours are exhausted via a silenced drain to prevent heat or moisture build-up inside the box. The interior lighting and glass door allow to observe the cleaning process.

• Noise is reduced by max. 85 %
• Box can be opened from the top and front
• Laterally arranged halogen lamps
• Stainless steel jacket

Scope of supply: Noise protection box, bottom tray with gland plate, power supply, manual

For use with: Elmasonic Easy 10/20/30/40/60/100/120/180, Elmasonic Select 30/40/60/100/120/180, Elmasonic P 30/60/120/180

Noise protection box with quiet fan and optimal insulation guarantees low-noise cleaning. Any vapours are exhausted via a silenced drain to prevent heat or moisture build-up inside the box. The interior lighting and glass door allow to observe the cleaning process.

• Noise is reduced by max. 85 %
• Box can be opened from the top and front
• Laterally arranged halogen lamps
• Stainless steel jacket

Scope of supply: Noise protection box, 2 bottom trays with gland plate, splash plate, power supply, manual

For use with: Elmasonic Easy 300, Elmasonic Select 80/150/300, Elmasonic P 70/300

Alkaline ultrasonic cleaning concentrate. It cleans surfaces made of stainless steel, ferrous metals, titanium and precious metals after mechanical treatment. Removes residues of lapping, polishing and grinding media, of punching oil, drawing grease and high-performance cooling lubricants.
Not applicable for aluminium and light metals.

Application concentration:	3 .. 8 % in water, 50 ... 80 ° C
Physico-chemical data:
Density:	1.122 g/ml
pH (concentrate):	13.1
Ingredients:	5 ... 15 % anionic surfactants, <5 % non-ionic surfactants, <5 % amine-soaps, <5 % phosphates.

Alkaline cleaning concentrate for laboratories and workshops. Suitable for cleaning of surfaces made of metal, glass, ceramics, plastics and rubber. Also suitable for inspectional cleaning (e.g. protection masks). Removes cooling lubricant emulsions, lapping and polishing residues, oils, greases, soot and dust. For most mineral oils and
greases demulsifying.
Check light metal alloys of the type AlSiMg for compatibility before use.

Application concentration:Ultrsonic bath:Immersion bath:	2 ... 5 %, 50 ... 80 ° C ~5 ... 10 %
Physico-chemical data:
Density:	1.132 g/ml
pH (concentrate):	~13
Ingredients:	5 ... 15 % anionic surfactants, <5 % amphoteric surfactants, 5 ... 15 % phosphates

Alkaline ultrasonic cleaner powder suitable for metal, cast iron, die-cast zinc, aluminium, plastic and rubber surfaces. Removes scaled/gummy oils and greases, waxes, lacquer and paint residues, grinding and polishing agents.
Not suitable for plastics that are not alkali-proof or that are susceptible for stress cracking. Check magnesium alloys and coatings for compatibility.

Application concentration:	3 ... 5 weight %, 50 ... 80 °C
Physico-chemical data:
Bulk density:	0.920 g/ml
pH (1 % solution):	~12
Ingredients:	5 ... 15 % anionic surfactants, <5 % non-ionic surfactants, >30 % phosphates

Neutral cleaning concentrate suitable for gentle ultrasonic cleaning of ensembles made from metal, light and precious metals, plastic, glass, ceramics and rubber. Removes oil, grease, polishing, lapping and abrasive materials, dust and fingerprints.
Free of alkalies and acids, without smell and biodegradable.

Application concentration:Ultrasonic bath:Immersion bath:	5 %, 50 ... 80 °C10 %, 50 ... 80 °C
Physico-chemical data:
Density:	1.07 g/ml
pH (concentrate):	~9
Ingredients:	15 ... 30 % anionic surfactants, <5 % non-ionic surfactants, 2-bromo-2-nitropropane-1,3-diol (~35 ppm)

Mildly acid cleaning concentrate suitable for non-ferrous metals, aluminium, stainless steels, plastics and glass as well as for the passivation of surfaces of stainless and chromium-containing steels. Brass and copper alloys are brightened up.
Removes polishing media, mineral grease and oil, oxide layers, rust and lime.

Application concentration:	1 .. 5 % in water, 30 ... 80 ° C
Physico-chemical data:
Density:	1.082 g/ml
pH (concentrate):	1.6
Ingredients:	<5 % anionic surfactants, <5 % non-ionic surfactants, benzisothiazolinone (<5 ppm), methylisothiazolinone (<5 ppm)