• Practical refilling system for epT.I.P.S box
• Trays supplied either double-sided or as stack packs, depending on tip size
• Contamination-free transfer to the trays into the work box
• Autoclavable trays are available
• Colour-coded trays for simple identification of the tips.

Silicone-free stopcock grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Stable grease film enables safe, long term use. Low heat-up occurs during rotation even if operation is continuous. When sealing glassware systems with glass and metal stirrers and shafts Alsirol protects rotating, precision-ground sockets and stirring shafts against glass abrasion. Also suitable for lubricating rotating metal and glass components. Acid and alkali resistant. For use under vacuum and high vacuum. Biodegradable. Non-toxic in normal use.

Overhead stirrer designed for simple stirring tasks for quantities up to 15 l (H₂O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 to 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

• Digital speed display
• Infinitely adjustable speed
• Push-through agitator shafts
• Overload protection
• Short-term overload operation

Vortex shaker suitable for intermittent operation (touch function), activated by pressing shaker attachment, or for continuous operation.

• Wide speed range, infinitely adjustable
• Versatile, due to 3 accessory interchangeable attachments and 7 inserts (e.g. Eppendorf tubes, microtitre plates, 250ml Erlenmeyer flasks etc.), please order separately
• Attachments securely click onto shaker in any position
• Strap clamp (VG3.36) ensures easy holding of round/Erlenmeyer flasks
• Sturdy, die cast zinc casing
• Stable at high speeds due to special feet (silicone base with ultra-high vibration damping)
• Eccentric drive with ball bearings
• Self-ventilated motor allows continuous operation with minimal warm-up of the housing

• practical refilling system for epT.I.P.S. Box
• workbox with tips
• autoclavable
• PCR quality
• certified free from human DNA, DNase, RNase and PCR inhibitor

Inexpensive, compact test tube vortex shaker. Designed for mixing small test samples by touch function.

• Small, compact and reliable
• For small containers up to 30mm in diameter, e.g. test tubes, centrifuge tubes, Eppendorf tubes
• Fixed speed (2800rpm)
• Excellent mixing
• Top of housing and the test tube accessories are made from chemically inert plastic. The bottom section is a coated, zinc die-casting.
• Includes lightweight 12V mains adapter

High-performance dispersing instrument for volumes from 1 to 2000ml (H₂O) with digital speed display. It offers a wide speed range from 3000 to 25000rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements adds versatility. Applications ranges from homogenizing waste water samples, use in laboratory reactors, dispersion tasks under vacuum / pressure and sample preparation in medical diagnostics.

• Digital speed display
• Electronic speed control
• Electronic overload protection
• Stainless steel dispersing elements can be cleaned quickly and easily
• Plastic disposable dispersing elements are available in two sizes
• Error code display
• Quiet operation

Shot poised. Without thermometer. Reference temperature: +20°C.

Without heating.

• For stirring quantities up to 1L (H₂O).
• Infinitely variable speed from 0 to 2500rpm
• White top plate suitable for observing colour reactions
• Power supply with adapter for EU/CH/UK/USA

Acc. to DIN 12252, form C.

Small dispersing instrument for volumes from 0.5ml to 100ml (H₂O). It offers a wide speed range from 8000 rpm to 30000 rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements guarantees a wide range of applications.

• Quick-connect coupling for changing dispersing elements easily
• Ideal for manual operation due to its light weight and ergonomic design
• Extremely mobile due to direct line power (no transformer required)
• Stainless steel dispersing elements can be cleaned quickly and easily as they can be dismounted without tools
• Plastic disposable dispersing elements are available in two sizes, particularly suitable for PCR analysis
• High performance drive ensures immense speed stability
• Quiet operation

Powerful drying cabinets with rapid heating and exact temperature regulation guarantees reproducible results. Thanks to its high quality insulation, the device has a very large interior of 125 l in relation to its total volume. This structure also reduces odour emissions, operating costs, and ensures excellent temperature uniformity.

• Electronically adjustable ventilation
• Key lock function
• Timer from 1 minute up to 100 days
• Adjustable temperature limit
• USB Interface
• For up to 6 shelves
• Interior made of stainless steel
• Door opening possible up to max. 180°

• Recirculating air drying cabinet with automatic fan switch-off
• Recirculating air adjustable in 10 steps
• Real-time clock
• Temperature selection limited TWB (DIN 12880)
• Illuminated interior
• Cable bushing at the rear for measurings inside the oven
• RS 232 Interface
• Direct saving of data on USB stick
• Interface for additional temperature sensor (display and control possible)
• 2 large TFT Displays

Competitively priced dispersing instrument for volumes from 1ml to 1500ml (H₂O) with digital speed display. It offers a wide speed range from 500rpm to 25000rpm that enables users to work at high circumferential speeds even with small rotor diameters. A broad choice of dispersing elements guarantees a wide range of applications.

• Digital speed display
• Electronic speed control
• Electronic overload protection
• Stainless steel dispersing elements can be cleaned quickly and easily
• Plastic disposable dispersing elements are available in two sizes
• Error code display
• Quiet operation

High speed laboratory stirrer designed for intensive stirring tasks for quantities up to 20l (H2O). It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/150 to 6000rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

• Digital speed display
• Infinitely adjustable speed
• Cone seat for precision shaft
• Overload protection
• Short-term overload operation

Suitable for all instruments from Vilber Lourmat.

The plastic material of the UVettes^® provides a transparency range of 220nm to 1600nm. It is possible to carry out measurements in the UV range as well as the entire VIS range.

• Suitable for measuring small volumes, min. 50 µl
• Individually blister-packed for sterile work
• DNA-/RNase- and protein-free
• Choice of two optical path lengths: 2 mm and 10 mm
• UV- and VIS-transparent between 220 nm and 1600 nm
• Volume markings at 500 µl and 1000 µl
• Total transparent material with outstanding surface properties
• Optimal filling guaranteed by tapered cuvette base
• Recessed optical window prevents scratches
• Self-standing design
• Marking possible on frosted gripping surface
• Optimal use in BioPhotometer and in most common spectrophotometers, using adapters

• Aufsatz Combifix KS mit 3 Spannleisten und Gummimatte
• Universaltablar KS mit Bohrungen für Federklammern

For semi-/unskirted PCR plates, PCR strips and 0.2 ml PCR tubes, for rotor A-2-VC. The work tray for holding 96 tubes is placed in a frame and with this forms a complete rack for 0.2 ml tubes.

A 10.1 Cutter, stainless steel: For most brittle materials with a Mohs hardness up to 5.
A 10.3 Cutter, hard metal: Made from tungsten carbide for hard materials with a Mohs hardness up to 9.
A 10.2 Star-shaped Cutter, stainless steel: For specific lightweight materials like paper, dried plant parts, plastics and for smooth-elastic materials.
A 10.4 Grinding chamber reduction: For small grinding volumes.

A 11.1 Spare beater: For pulverising substances with a Mohs hardness up to 6.
A 11.2 Cutter: For pulverising soft, fibrous grinding materials.
A 11.3 Beater, hard metal: For pulverising substances with a Mohs hardness up to 9, chrome-carbide coated
A 11.4 Grinding container, 250ml: Made of polycarbonate with stainless steel inlet. Not suitable for cooling with N₂, only applicable with double beater A 11.6.
A 11.5 Spare grinding container, 80ml: Made of Tefcel (PTFE, glass faser-reinforced) with stainless steel inlet. Excellent resistance to chemicals and low temperatures (- 200 °C).
A 11.6 Dubbel beater: For use up to Mohs hardness 3. Only applicable with grinding chamber A 11.4.
A 11.7 Funnel: Prevents splashing by pouring in liquid nitrogen in the grinding chamber A 11.5.

Plastic dispersing heads: Autoclavable. Stainless steel dispersing heads: Ultimate fineness: emulsions 1µm to 10µm and suspensions 5µm to 50µm, sterilisable by all methods. ST tools are recommended for use with tissue and other fibrous materials.

AS 4000.1 Universal attachment
For various types of vessels. Infinitely variable clamping rolls allow universal adaptation to various vessels.
Included with delivery: 1 x AS 1.400 Basic holder, 6 x AS 1.401 Clamping roll, 12 x AS 1.402 Fastening screw
AS 4000.2 Fixing clip attachment
For shaking flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips).
Number of fixing clips (volume): 50 x AS 2.1(25ml), 48 x AS 2.2 (50ml), 25 x AS 2.3 (100ml), 16 x AS 2.4 (250ml), 12 x AS 2.5 (500ml), 7 x AS 2.6 (1000 ml)
AS 4000.3 Dish attachment
For smooth shaking operations in the low viscosity range, e.g. for cell cultures, nutrient media in Petri dishes, culture bottles and vessels with a low centre of gravity. With integrated slip-resistant foil (PP).

Tripod bracket for mounting the PowerCube into a tripod stand. With stainless steel rod approx. 13cm long.