Drum pumps

• For ultrapure and aggressive liquids
• Made of solid, pure white PTFE, giving an excellent chemical resistance to all media (with the exception of elemental fluorine)
• With stopcock to prevent the escape of harmful or hazardous liquids and unwanted drips
• Barrel screw joints are availabe as accessories

Accessories Accessories for Manual drum pump, PP Accessories Screwthread connections for PP and PTFE drum pumps

The pumps are equipped with two different power supply systems: AccuOne, driven by a high-performance rechargeable battery or EnergyOne, with a power cable for direct connection to mains electricity. Innovative new feature: The power supply units are interchangeable! The rechargeable battery or the power supply unit are fitted with a clip lock and are removable. They can be exchanged quickly and easily. Thus AccuOne can also be operated with the power supply cable unit and EnergyOne can be operated with the rechargeable battery. The drive can also be disconnected quickly and easily from the pump station with a clip lock. This makes it possible to use one drive for filling at several stationary pump stations. AccuOne and EnergyOne are designed for applications in which even very small amounts of liquid can be added to small containers with narrow openings. The TouchPanel is sealed against dust, dirt and water. By a foil Keyboard it can be used to regulate the flow rate continuously and precisely from 0.4l/min to 12 l/min. The light and powerful pumps are made of high-quality materials, PP, PTFE and Hastelloy C, to ensure outstanding chemical resistance. Please make note of detailed information related to chemical resistance!

	AccuOne | EnergyOne
Maximum pumping capacity: Weight:	12 l/min 750 g | 580 g
Discharge connection:	3/4"
Shaft: Pump station, Seals:	Hastelloy C PP, PTFE
Power supply:	Battery Li-Ion (up to 600l) | 230V incl. international plug adapter

Accessories Accessories for AccuOne and EnergyOne Accessories Screwthread connections for PP and PTFE drum pumps

• For decanting acids, caustic solutions and aggressive detergents
• Excellent recovery of residual liquid in the barrel provided by base-sitting, non-return valve and steplessly adjustable immersion tube
• For barrels and tanks from 30 to 1000l.

Type A: With rigid, angled, dispensing nozzle.
Type B: With flexible, PVC dispensing hose and stopcock.

Barrel screw joints and thread adapters for standard containers are available as optional accessories. Please order separately.

Immersion tube diam.:	32mm
Max. pump capacity:	up to approx. 12 L/min.

Accessories Accessories for Manual drum pump, PP Accessories Screwthread connections for PP and PTFE drum pumps

Barrel screw joints for stainless steel drum pumps.
Constructed in nickel-plated brass. For containers with R2", internal steel barrel thread.

Stainless steel V2A and PTFE.
For safe dispensing of liquids with a low flash point . Electrostatic charge can be dissipated through accessories antistatic set and drum screwthread connection. Not suitable for acetone.

Accessories Barrel pumps, screw joints Accessories Anti-static set

Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.

• Motor 230 V, 200 W (IP 24)
• Seal less pump tube
• Suitable accessory flow meter required
• Pump with tubing connection

Two options:

• Polypropylene version for acids and alkalis
• Stainless steel version for low-viscosity lubricants

Available as a set (9.880 310-9.880 315) with 1.5 m PVC tubing, nozzle in polypropylene, wall bracket.
Set accessories: Lutz nozzle, 1.5 m PVC hose 3/4", hose connection, hose clamps, wall bracket (for pump B2 Vario PP-SL Ø 32 mm).

Alternative Barrel pumps, PP

For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.

Drum pumps supplied with: 230V motor, 5m cable and plug, pump tube and tubing connection. Explosion-proof version additionally supplied with earthing strap.

Pump set "alkalis"
For low-viscosity alkali solutions such as sodium chloride, Potassium hydrate, ammonia, formic acid and acetic acid.
Supplied with: Pump, 2.0m PVC tubing (DN19 fitting), PP nozzle and barrel adapter

Pump set "acids"
For low-viscosity acids such as hydrochloric, phosphoric, chromic, citric acids and battery acid.
Supplied with: Pump, 2.0m PVC tubing (DN19 fitting), PP nozzle and barrel adapter

Pump set "mineral oils"
For low-viscosity mineral oil products such as Diesel, fuel, hydraulic, machinery and motor oils.
Supplied with: Pump, 2.0m PVC tubing (DN25 fitting), aluminium nozzle and PP barrel adapter

Pump set "solvents"
For easily flammable hydrocarbons such as ethanol, gasoline, butanol, isopropanol, kerosene, methanol and petroleum.
Supplied with: Pump, 2.0m solvent-resistant tubing (DN19 fitting), brass conductive tubing coupling and nozzle, earthing strap and PP barrel adapter

Alternative Drum pumps, mains-powered

With flexible discharge tubing for drawing off into larger canisters and containers. Convenient liquid transfer as the canister can be left standing on the floor. The connection cone is pressed against the canister manually.

The pump is fitted with a gas-displacement device for odour-free, liquid transfer. The pump can be hermetically sealed with 2 ball valves for odour-free liquid transfer using the gas-displacement method.

• parts in contact with media: AISI 304 stainless steel, PTFE, nickel-plated brass, conductive PA.
• with barrel screw joint, 2" thread
• for bottle openings 16 to 49 mm
• 32 mm dia. immersion tube

Not suitable for acetone!

These new magnetic drive pumps are designed for pumping acids, bases, mixtures of acids and bases, solvents, photochemicals into alkali stripping baths, galvanic baths, as well as radioactive, sterile, expensive or highly corrosive liquids. The pumps are sealless. The impeller is driven by the magnetic force of the outer magnets, therefore no mechanical seal is required. As the pump housing is hermetically sealed no leaks can occur. The use of high performance,
permanent magnets, ensures high transmission forces even at elevated temperatures.

• viscosity up to 20 mPas
• pump complete with flanged-to motor

Magnetic drive pump 15 Watt: Motor 230V, material PP (fibre-glass reinforced), stainless steel (shaft), Viton^® (O-ring), tubing connection 14mm
Magnetic drive pump 29 Watt: Motor 230V, material PP (fibre-glass reinforced), ceramics (shaft), Rulon (guide bearing), Viton^® (O-ring), suction/discharge G ¾" OT (BSP)

The self-closing discharge (with auto-stop function) of the Mini solvent pump ensures absolutely precise filling with no dripping at all. Dosing is even easy in very small containers such as test tubes, which present no problems. A hose can optionally be fastened onto the discharge spout (internal Ø 6 mm), thus making it possible to fill the container from a greater distance.

The Mini solvent pump is especially compact and very well balanced, which makes it possible to fill without tipping, even from very small containers.

Thanks to its sturdy design and high-quality materials, the Mini solvent pump consistently ensures neat and reliable filling throughout its long service life, easily and conveniently.

• Ideal for 1-5 l containers
• Connecting thread GL 45
• Parts in contact with medium made of PTFE and stainless steel (1.4301, 1.4404)
• PTFE hose (6 x 8 mm) 0.4 m
• Including grounding cable 2 m
• Adapters available as accessories for S 40, GL 38 and GL 32

For filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).

• Medium-contacting parts made opf stainless steel (1.4301) and PTFE
• For barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depth
• Suitable for steel barrels with R 2"" thread

Accessories Anti-static set

For contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).

• Medium-contacting parts are made of stainless steel (1.4301) and PTFE
• For containers up to 60 litres
• Suitable for containers with R 2"" thread
• The solvent pump for tinfoil canisters has a connector thread for pull-out spouts

Accessories Anti-static set

Accessories Hand pumps OTAL®, PP Alternative Drum pump Pump-it®

For Bürkle pumps and discharge stopcocks.

The gas-tight barrel pump reduces the escape of dangerous, health-endangering or malodorous gases when filling liquids. The resulting vapours are returned directly to the original container via the gas pendulum line.

• Medium-contacting parts, PP, PE and PVC (hose)
• Steplessly extendable telescopic tube for barrel depths of 40 - 67 cm
• Universal adapter for container openings of 34 - 70 mm

For StopCock spigots and ball valves.

For ball valves.

For sampling cohesive, caked and not free-flowing substances.

• Food-safe
• Autoclavable

Total length:	1000 mm
Diameter:	25 mm
Outer diameter with scraper:	32 mm