Universal, Heating and Drying incubators

• Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO₂ parameter is continuously regulated

• Two gas connections with quick release connectors for automatic switch-over of gas cylinders

• Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation. Humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filter

• Control of oxygen concentration by N₂ inlet; adjustment range 1 % up to 20 % O₂;

• Peltier cooling unit, enables a working temperature of 37 °C even at higher ambient temperatures of up to 35 °C

• Further options and accessories, f. ex. special works calibration certificates, subframes, pressure reducing valves on request.

With their maximum working temperature of 300°C and forced air circulation, the TR series ovens achieve very good temperature uniformity. They can be used for various applications such as e.g. drying, sterilising or warm storing. The stainless steel interior chamber is easy to clean and resistant to rust.

• Tmax 300°C
• Operating range, room temperature +5 to 300°C
• Models TR 60 to TR 240 designed as tabletop models
• Models TR 420 and TR 1050 designed as floor standing models
• Horizontal, forced air circulation results in temperature uniformity better than ±5 °C
• Stainless steel chamber, alloy 304 (AISI)/(DIN material no. 1.4301), rust-resistant and easy to clean
• Large handle to open and close the door
• Charging in multiple layers possible using removeable trays (number of removeable trays included, see table below)
• Large, wide-opening swing door, hinged on the right with quick release for models TR 60 to TR 420
• Double swing door with quick release for TR 1050
• TR 1050 equipped with transport castors
• PID microprocessor control with self-diagnostic system
• Infinitely adjustable exhaust at the rear wall with operation from the front
• Available controller variants are the R 7 as basic variant with adjustable holding temperature or the programmable controllers B 510 (with touch panel, 5 programs with 4 segments each) and C 550 (with touch panel, 10 programs with 20 segments each)
• Solid state relays provide for low noise operation
• 220-240 V 1/N/PE 50/60 Hz connector as standard

• Over-temperature limit controller with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Infinitely adjustable fan speed of the air-circulation
• Window for observing charge
• Further removeable grids with rails
• Side inlet
• Stainless steel collecting pan to protect the furnace chamber
• Door hinges on the left side
• Reinforced bottom plate
• Safety technology according to EN 1539 for charges containing liquid solvents (TR .. LS) up to model TR 240 LS, achievable temperature uniformity ±8 °C
• Transport castors for model TR 450
• Upgrading available to meet the quality requirements of AMS 2750 E or FDA
• Process control and documentation via VCD software package for monitoring, documentation and control

Safer than disinfection, hot-air sterilisation of containers and instruments.
The safety feature for this hot air steriliser: Setpoint Wait. This means that the programme for sterilisation only starts when the set temperature has been reached. This feature can also be used with freely positionable Pt100 temperature sensors. Here the sterilisation time only begins when the set temperature has been reached at all measurement points, and reliable sterilisation is guaranteed at all times.

Textured stainless steel housing, rear of zinc-plated steel, intuitively operated TwinDISPLAY(TFT colour display) with touchscreen
You can find a detailed description of the "TwinDISPLAY" model at www.memmert.com

• Available parameters on the ControlCOCKPIT: Temperature (Celsius or Fahrenheit), programme time, relative humidity, time zones, summertime/wintertime
• Two Pt100 sensors DIN class A in a 4-wire circuit for mutual monitoring, taking over functions in case of an error
• AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
• ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
• Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
• Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging
• Multiple overtemperature protection: Electronic temperature monitoring TWW/TWB and mechanical temperature limiter TB acc. to DIN 12880, AutoSAFETY automatically adjusts to the set value within a freely adjustable tolerance range. Setting individual MIN / MAX values for over/undertemperature alarm

The CULTURA^® M Mini-Incubator has specifically been designed for the incubation of contact slides and dipslides, as well as common Petri dishes for detecting bacteria, fungi and yeast. With its extremely small footprint, it can easily be transported wherever you need to use it. The Cultura^® M incubator has an internal capacity of approximately 4 L. It is used in the areas of medical diagnostics and water analytics. The transparent door allows you to check inside the incubator without opening the door. Supplied with one Multirack for the incubation of up to 18 dipslides and one thermometer.

For daily laboratory use. Models with flap door or lift door available, for temperatures from 1100 °C to 1400 °C. Equipped with programmable controllers B 510 (with touch panel, 5 programmes with 4 segments each), or C 550 (with touch panel, 10 programmes with 20 segments each), L 1/12 with controller R 7 (continuous operation).

• Dual shell housing made of textured stainless steel sheets for low external temperatures and high stability
• Adjustable air inlet integrated in door
• Exhaust air outlet in rear wall of furnace
• Solid state relays provide low-noise operation
• Standard connector 230 V 1/N/PE 50/60 Hz
• 24 and 40 l with 400 V 3/N/PE 50/60 Hz

• Chimney, chimney with fan or catalytic converter
• Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Protective gas connection to purge with non-flammable protective or reaction gases (not available in combination with chimney, chimney with fan or catalytic converter)
• Manual or automatic gas supply system
• Process control and documentation via VCD software package for monitoring, documentation and control

• Heating from two sides (three sides for interior volumes of 24, 40 and 60 l)
• The hot side of the lift door is facing away from the operator