Tube racks

Thermo Scientific™ Nalgene™ Unwire™ test tube racks manufactured with Resmer™ Manufacturing Technology. 3-tier grid design. Will not float. Single moulding, with no sharp edges or corners. Alphanumeric grid referenced on top tier for easy identification of samples. End plates can be labelled or written on. Autoclavable....

Ideal for handling hot tubes or to heat test tubes up to 30 mm diameter. Manufactured from stainless steel with a finger grip. With a long arm for better handling and to avoid close contact between fingers and the flame. High resistance to heat up to 100°C....

Robust polypropylene construction. Simple, easy to open and close. Flatten for compact storage. Pops up for instant use. Expand and collapse when racks are needed. Printed grid aids rapid retrieval. Stack racks in open or closed position. Saves space when racks are not in use. Not recommended for steam sterilisation. Dimensions (L x W x H): 255mm x 137mm x 72mm when expanded, 21mm high when collapsed....

Autoclavable, fiberglass-reinforced polypropylene racks are ideal for bench work or storage of test tubes. Allows easy viewing of tube contents. Does not float in water baths. User can also turn tubes as well as electrophoresis and chromatography plates upside-down and use as a drying rack. The flexible peg design is suitable for tubes with a diameter of 10mm to 13mm and 14mm to 17mm. Includes embossed indexing and drainage holes....

Blue. For tubes up to 18mm in diameter. Autoclavable and unbreakable. Can be dismantled. Can be recycled....

Interlock on all sides.

Autoclavable. Our user-friendly cube racks are a must for any laboratory. Accommodate 4 x 50ml tubes, 10 x 15ml conical tubes, 12 x 75mm or 12 x 100mm tubes or 16 x 1.5 to 2.0ml microcentrifuge tubes. Polypropylene racks slide together, allowing you to work with different tubes on as many connected racks as desired. Available in natural or assorted colours (blue, green, yellow orange and pink). Dimensions: 108 x 108 x 114mm....

White nylon coated or stainless steel wire, electrochemically polished. 3-tier design, second tier approximately 30mm high. For 50ml test tubes....

Capable of holding different size tubes in each available slot as the well literally adapts to your tube size to hold firming in an upright position. The design enables you to hold 12 to 30mm (5 to 50ml) tubes simultaneously and still allow full viewing of the tube label. Racks can be linked together for additional holding capacity. Autoclavable. Dimensions (W x D x H): 181 x 56 x 76mm...

Blue. Manufactured from high density polypropylene. Moulded-in alpha numeric grid reference on the top tier of the rack allows easy sample identification. Due to their weights, they do not float in the water baths. Autoclavable....

Suitable to hold 15 ml and 50 ml centrifuge tubes with conical bottom. Just push the tubes into the cavities and leave them. Unique design has an angular end to provide easy stacking for space saving purpose. Moulded in alpha numeric grid reference on the rack allows easy sample identification....

Fully autoclavable. This storage/working rack, with lid, is designed to work with different PCR volumes at the same time. It can accommodate up to 32 individual 0.2 ml PCR tubes, 24 pieces of 1.5 / 2.0 ml and 16 pieces of 0.5 ml microtubes. Tube wells are alpha-numerically matrixed with raised bold type for accurate sample identification. The rack also has a transparent lid for easy viewing of samples. Frosted writing panels on four sides allow labelling or writing....

• Numbered positions for easy handling and identification
• Made of high quality polypropylene (PP) for chemical and physical resistance
• Temperature stability from -86 °C to 121 °C
• Autoclavable (121 °C, 20 min)
• Laboratory washer-safe for easy cleaning
• Stackable to save lab space

For storage of micro tubes. Stand has two sides and each side accomodates different size and combination of microcentrifuge tubes. First side can hold 96 pieces of 1.5 ml tubes, and the other side holds 48 pieces of 0.5 ml tubes and also 96 pieces of 0.2 ml tubes. Supplied with a clear polypropylene lid which covers the rack and protects the tubes from dust and other effects. Alphanumerical index on tube rows enables easy identification of tubes....

Grey. Numbered positions for 20 x 1.5 ml microcentrifuge tubes. Autoclavable (121 °C). Dimensions (l x w x h): 210 mm x 70 mm x 37 mm....

Made of "modified" high density ABS which enables the rack to be used in water baths. Racks can be linked together to form a multiple rack system. Rod type spacious tube compartments are ideal for screw cap tubes of 15 ml and 50 ml. Unique rack design enables perfect adaptance of the tubes and allows easy viewing of the tube contents. Pegs hold the tubes firmly in place and remain straight even after repeated autoclaving. Interlocking system for linking the racks in multiple rows....

Interlocking racks with 2 x 10 array hold 0.5/1.0/1.5/2.0ml tubes.
Polypropylene racks lock together on each side, permitting the user to attach several together to increase capacity.
Features an innovative "hold-it" finger slot on the front, and internal ribbing for stability. Autoclavable....

Blue. Safe storage and transport of cryogenic vials.

• Drainage holes in each well
• Alphanumeric identification
• Temperature resistant up to -196 °C
• Autoclavable

• 3 tier with grips for easy transport
• Stackable
• Base tier has rounded wells with drain holes
• Top tier has lettered and numbered rows
• Steam autocavable at 121 °C

Stackable racks with alphanumerical positions. Operating temperature -20 °C to +90 °C. Autoclavable at 121 °C (2 bar), acc. DIN EN 285. Density 1.2 g/cm³. Will not float in water bath. Racks are supplied in two-pieces (Ø 11 mm, for micro tubes) or three-pieces (Ø 13 mm for cryogenic tubes) for convenient and permanent assembly....

PE-coated wire. For 4 x 12 reaction vessels 1.5ml, distance between compartments is 5mm. With two handles....

behrotest ^® standard digestion vessels have standard dimensions. That means they fit into digestion and distillation units of most brands. Of course, it also means that standard digestion vessels of most brands can be used with behr distillation units....

This split-frame rack holds up to two different grid inserts. Grid inserts must be ordered separately.

• Three tier rack
• With rubber feets
• Stackable
• Chemical resistant
• Autoclavable at 121°C

Works with PCR ^® tubes right next to centrifuge tubes. The 0.2ml tube wells oriented in standard 96-well format. Use with PCR ^® transfer trays. Rotate the rack to work either with 0.2ml tubes and 0.5ml tubes, with 0.2ml tubes and 1.5ml tubes or with 0.5ml tubes and 1.5ml tubes. Or turn a module and work with a total of 96 x 1.5ml tubes. Quickly identify tubes with imprinted alphanumeric system. Autoclavable. Dimensions (L x W x H): 296 x 118 x 34mm...

Can be used for tubes with a diameter up to 16 mm. Rack comes as "ready" unit, no assembly is required. Bottom of each tube compartment has a silicone gripping finger that holds the tube at centralised position. Not recommended for autoclaving. With Push & Eject funktion. Holds up to 50 tubes in 5 x 10 layout....

Enhance sample storage at low temperatures, including vapor phase Liquid Nitrogen, with Thermo Scientific™ Matrix™ barcoded latch racks. Barcoded Latch Racks feature a linear barcode, 2D barcode and human readable rack identification on three sides of the rack for the ultimate in sample tracking. Use in combination with Thermo Scientific 2D barcoded tubes, barcode readers, arrayers and capping equipment. Storage in robot-friendly ANSI-footprint rack. Racks feature linear barcode, human readable ID and 2D barcode for ultimate sample tracking regardless of your barcode system. Rack barcodes are compatible with our range of VisionMate readers. Hinged lid rests in "open" position on rack while conducting manual pipetting to prevent contamination of lid sitting on bench. -ANSI-format latch racks maximize storage space and are compatible with multichannel manual pipettes or automated liquid handling equipment. Latch rack lid can be lifted robotically for tube access with high-throughput automated applications....