Incubators

Stainless steel. Including 2 shelf suports.

Due to a small footprint, compact, stackable design and expanded temperature range, this shaking incubator is ideal for molecular biology and general use. With integral orbital shaker. Two full and one half shelves are supplied with each incubator.

• Temperature control system SmartChek™
• Internal electrical outlet
• Flask capacity: 4 x 1 l, 5 x 500 ml, 9 x 250 ml or 16 x 125 ml
• Gasket door with large viewing area

Specifications
Temperature range:	Ambient +5 °C ... 80 °C
Precision:	±0.5 °C
Temperature setting resolution:	0.1 °C
Shaker orbit:	19 mm
Shaker speed:	20 ... 300 rpm
Timer:	0 ... 99 min. or continuous
Chamber volume:	49 l
Chamber Dimensions (W x D x H):	343 x 375 x 381 mm
Total Dimensions (W x D x H):	425 x 550 x 580 mm
Weight:	37.7 kg
Power supply:	230 V, 50/60 Hz

Capacity 60L. Maximum temperature 60°C. With hinged front and top panels, temperature control system with preset at 37°C, safety temperature cut-out, air circulating fan and holes for gas or cable introduction. Supplied flat packed for assembly by the user. For 220-240V 50Hz single phase supplies. Without base plate or shelf rack system. With BioCote, silver-based, antimicrobial protection on the metal surfaces.

Accessories Accessories for Incubators INC-200 / INC-200D

• Battery-buffered ControlCOCKPIT - Uninterrupted supply for the entire display unit (ControlCOCKPIT) and therefore complete documentation of all parameters even when there is a power failure. The CO₂ parameter is continuously regulated

• Two gas connections with quick release connectors for automatic switch-over of gas cylinders

• Active microprocessor control for humidifying and dehumidifying (40 - 97 % rh), incl. digital indication and auto-diagnostic system ensures even more rapid reaching of set humidity and very short recovery times while avoiding condensate formation. Humidity supply with distilled water (from an external tank) by a self-priming pump; integral bacteria block by generating hotsteam, dehumidifying via sterile filter

• Control of oxygen concentration by N₂ inlet; adjustment range 1 % up to 20 % O₂;

• Peltier cooling unit, enables a working temperature of 37 °C even at higher ambient temperatures of up to 35 °C

• Further options and accessories, f. ex. special works calibration certificates, subframes, pressure reducing valves on request.

Type E3(x): standard, stainless steel wire (max. loading: 30kg)

Type E0(x): perforated stainless steel shelves (max. loading: 30kg)

B-Class = UNB / UFB / INB / SNB / SFB
E- and P-Class = UNE / INE / IFE / SNE / SFE / UNP / UFP / INP / IFP / SFP

The CellCulture^® CO₂ incubators from Esco are widely used in scientific research to grow and maintain cell cultures. Typical fields of application include tissue engineering, neuroscience, cancer research and other mammalian cell research applications.

• Fast and uniform temperature, CO₂ and O₂ control (O₂ suppressed models)
• HEPA filtration system with internal blower (some models)
• Capacitive humidity sensor
• IR CO₂-sensor with automatic auto zero
• Quick recovery time for temperature, CO₂ and humidity after door opening
• Stainless steel 1.4301 (AISI 304) or copper interior
• 90 °C moist heat decon system (models with air jacket)
• Easy to clean due to removable lids and inner door
• Serial RS485 communication port
• Low maintenance
• Stackable

Options on request:
Additional shelves, stacking kits, rollerbase, chart recorder
Incubator with 180 °C high heat sterilization cycle, for efficient contamination protection. Conforms to the international standards for dry heat sterilization.

• Stainless steel chamber
• Heat-resistant sensors
• IR CO₂ sensor
• O₂ Sensor (for suppressed O₂ model)
• 2 MB built-in flash memory for data and event logging

Versatile cooled incubators with auto-tuning temperature control system for optimal temperature stability.

• 2 internal sockets for further devices
• Software TEMPSoft™ for setting times, temperatures, ramps and alarm thresholds
• Wireless (WIFI) and wired connectivity
• Front 3 button panel (Set, "+", "-")
• Life span counter for key componets is built in
• Forced ventilation for uniform temperature distribution

Model FOC 200I / FOC 120I: With internal transparent door
Model FOC 200IL: With internal transparent door, LED illuminated shelves (2 of 3 shelves)

Scope of supply: Cooled incubator, shelves

Specifications
Temperature range:	3 ... 50 °C
Temperature accuracy:	± 0.5 °C
Display:	3-digit LCD
Interface:	Wi-Fi, 2 x RS485
Power supply:	230 V, 50/60 Hz

Accessories