TLC Plates

Silica gel 60 F₂₅₄

ALUGRAM^®

Base material: Nano-K silica 60, specific surface (BET) ~500 m²/g, mean pore size 60 Å, specific pore volume 0.75 ml/g, particle size 2 to 10 µm; for preparative plates (1 mm thickness of layer) standard silica 60, particle size 5 to 17 µm, pH stability 2 to 10 indicator: acid-resistant product with a pale blue fluorescence for short-wave UV (254 nm); UV-absorbing substances apppear as dark-blue to black spots on a light-blue background; partial octadecyl modification, wettable with water, carbon content 14 %. 18-100 normal phase or reversed phase separation modes with eluents from anhydrous solvents to mixtures with high concentrations of water (see figure); the relative polarity of the eluent determines the polarity of the layer.
Recommended application: aminophenols, barbiturates, preservatives, nucleobases, polycyclic aromatic hydrocarbons, steroids, tetracyclines, plasticizers (phthalates).

Available as glass plates with or without fluorescent indicator (UV 254).

Glass plates available on request.

Support materials for TLC ready-to-use layers

Glass plates: glass, ~ 1.3 mm thick, high requirements for weight, packaging and storage, ideal torsional strength, high temperature stability, susceptible to breakage, can not be cut with scissors, high resistance against solvents, mineral acids and conc. ammonia, suitability for aqueous detection reagents depends on the phase

POLYGRAM^®: polyester, ~ 0.2 mm thick, low requirements for weight, packaging and storage, low torsional strength, max. 185 °C temperature stability, not susceptible to breakage, can be cut with scissors, high resistance against solvents, mineral acids and conc. ammonia, very suitable for aqueous detection reagents

ALUGRAM^®: aluminium, ~ 0.15 mm thick, low requirements for weight, packaging and storage, relatively high torsional strength, high temperature stability, not susceptible to breakage, can be cut with scissors, high resistance against solvents, low resistance against mineral acids and conc. ammonia, limited suitability for aqueous detection reagents
Glass plates

silica 60, specific surface (BET) ~ 500m²/g, mean pore size 60Ä, specific pore volume 0.75ml/g, particle size 5.17µm
kieselguhr zone for rapid sample application: because kieselguhr is completely inert towards a large number of compounds, the samples always from a narrow band at the interface of the two adsorbents, irrespective of shape, size or position of the spots in the concentrating zone. Separation then takes place in
the silica layer.

available as glass plates with or without fluorescent indicator (UV254)

Features separations with simple developing sovents; samples are coloured thus eliminating the need for visualisation. All equipment needed is contained in the kit.

• V-shape provides optimal recovery of reagents
• Shared wall technology increases well volume and wider cells improve mixing
• Ideal as collection plate for Nunc Filter Plates
• Low binding for homogeneous assays and storage

With 8 x 12 wells. Coded: A to H and 1 to 12. Volume per well 0.3 ml. Can be sealed by accessory cover plates (individually heat-sealed) or adhesive film from a roll.

Three PCR instruments in one - the Biometra TRIO offers three separate sample blocks with which you can perform three different PCR reactions simultaneously. The simultaneous use of all three blocks also enables a very high throughput.
The Biometra TRIO is ideal for optimizing primer annealing temperatures, which are crucial for specific and efficient PCR reactions. The professional user management is ideal for laboratories with many users.

• Highest flexibility due to three powerful block modules
• Short protocol run times thanks to fast heating and cooling rates
• Best reproducibility due to highest temperature uniformity
• Easy determination of the optimum annealing temperature thanks to Temperature Optimization Step technology
• Protocol Wizard and annealing temperature calculator
• Simple opening mechanism and direct access to the sample block
• Whisper-quiet operation thanks to optimized air flow
• Advanced user management
• PCR Control App

Cell culture multiwell plates are available in the hydrophilic surface (TC surface treatment) for improved cell adhesion and hydrophobic surface for suspension cultures and hybridoma cells. All panels can be stacked together, both with and without cover. The special design of the panels is also in stacked plates a faster heat exchange over the entire bottom surface of each plate allows . All plates have an imprinted lot number and are both pyrogens and DNase / RNase - free .

Properties:

• High clarity and low autofluorescence
• Lid enables optimal gas exchange with the lowest possible evaporation
• Single position lids to prevent cross-contamination
• Alphanumeric well coding
• Compatible with common instruments and automated systems
• Easy-to-open packaging

Durapore® PVDF membranes are characterized by high throughput and high flow rate. To maximize recovery and minimize interaction with your sample, the membrane has very low protein binding.

Features & Benefits:

• Chemical compatibility
• Automation compatible
• Suitable for: Receptor/Ligand Binding Assay, Protein Kinase/Phosphatase Precipitation Assays, Bead-Based Assay