Benchtop centrifuges

Swing-out rotor A-4-38 (centre of illustration) accelerates up to four 85 ml round buckets to approximately 3000 xg. Max. speed 4400 rpm. Square buckets for up to 24 x 15 ml vessels are offered for applications with high throughputs.
The fixed angle rotor F-35-30-17 is available in two different versions with a capacity up to 30 x 15 ml.
The simple swing out rotor A-8-17 for 8 x Falcon^® tubes completes the range.

Accessories Centrifuges 5702 / 5702 R / 5702 RH (IVD) Accessories Adapters and accessories for rotors for centrifuge 5702

Rotor lids included.

FA-45-48-11: Standard rotor for 48 x 1.5/2.0ml tubes, aerosol-tight, Eppendorf QuickLock^® closure
F-45-48-11: Rotor for 48 x 1.5/2.0ml tubes
FA-45-16-17: Fixed angle rotor for 16 x Eppendorf Tubes^® 5.0 ml, aerosol-tight, Eppendorf QuickLock^® closure
FA-45-30-11: Fixed angle rotor, 30 x 1.5/2.0ml tubes, incl. aluminium lid, coated, aerosol-tight. Rotor is autoclavable
F-45-30-11: Fixed angle rotor, 30 x 1.5/2.0ml tubes, coated, aerosol-tight. Rotor is autoclavable
FA-45-24-11-Kit: Kit-Rotor for 24 Spin Columns or 1.5/2.0ml tubes, aerosol-tight. Rotor for centrifugation with open tube lids
F-35-6-30: Falcon^®rotor for 6 x 15/50ml tubes, incl. adapter
A-2-MTP: Swing out rotor for MTP or PCR plates, incl. 2 x MTP buckets, max. loading height 29mm
S-24-11-AT: Swing out rotor for 24 x 1.5/2.0 ml tubes, aerosol-tight

Accessories Adapters and accessories for rotors for microcentrifuge 5430 / 5430 R Accessories

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

A-2-DWP

• Incl. 2 buckets
• Various combinations of stacked plates can be centrifuged
• Max. loading height 89 mm
• Simultaneous processing of up to 192 samples
• Max. speed 2250 x g (max. 3700 rpm)
• Rotors and carriers are autoclavable (20 mins. at 121 °C)

A-2-DWP-AT (only for 5810 / 5810 R)

• Incl. 2 buckets, 2 aerosol-tight caps and 2 plate carriers
• Various combinations of stacked plates can be centrifuged
• Max. loading height 67 mm (89 mm without caps)
• Max. speed 3486 x g (max. 4500 rpm)
• Rotors and carriers are autoclavable (121 °C, 20 min.)

Alternative Swing-out rotors S-4-104 and accessories Alternative Swing-out rotor A-4-81 and accessories Alternative Swing-out rotor S-4-72 and adapters Alternative Swing-out rotor A-4-44, adapters and accessories Alternative Swing-out rotor A-4-62 and accessories

These universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design. Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 24325 xg, turning these table top centrifuges Z 366 and Z 366 K into universal high-powered centrifuges.

• Maintenance-free induction drive
• Microprocessor with large LCD Display
• Motor driven lid lock
• Automatic rotor identification system with over speed protection, immediatley upon rotor insertion
• Active imbalance-identification and cut off
• CFC-free refrigeration system
• A large variety of rotors and accessories
• Manufactured according to international safety regulations, i.e. IEC 61010
• Audible signal at the end of each run with several melody options
• Rotor exchange is easy to handle
• Noise level < 63 dBA (depends on rotor)
• Optimized airflow system keeps the samples cool

Without rotor. Please order separately.

Specifications
Max. RCF Z 366 / Z 366 K:	21379 / 24325 x g
Max. speed Z 366 / Z 366 K:	15000 / 16000 rpm
Max. capacity:	6 x 250 ml
Cooling temperature Z 366 K:	-20 °C ... 40 °C
Timer:	59 min 50 sec / 10 sec increments 99 h 59 min / 1 min increments
Power consumption Z 366 / Z 366 K:	530 W / 800 W
Dimensions (W x D x H) Z 366 / Z 366 K:	430 x 510 x 360 mm / 720 x 510 x 360 mm
Weight Z 366 / Z 366 K:	52 kg / 77 kg
Power supply:	230 V, 50/60 Hz

Accessories  Accessories  Accessories Angle rotors for Hermle centrifuges

Cooled and uncooled table centrifuge for a variety of different vessels due to a wide range of various rotors.

• Maintenance-free induction drive
• Micropocessor with large LCD display
• Motor driven lid lock
• Automatic rotor identification system with over speed protection, immediately upon rotor insertion
• Active imbalance identification and cut off (rotor-specific)
• CFC-free refrigeration system
• A large variety of rotors and accessories
• Audible signal at the end of each run
• Permanent display of target and actual value
• 10 acceleration and 10 braking profiles
• Memory for 99 complete runs, incl. rotor type
• Noise level < 65 dBA (depend on rotor)
• Manufactured according to international safety regulations, i. e. IEC 61010
• Stainless steel chamber

Without rotor. Please order separately.

Specifications
Max. RCF Z 446 / Z 446 K:	24325 xg / 26328 xg
Max. speed	200 ... 16000 min-1
Max. capacity:	4 x 750 ml
Cooling temperature Z 446 K:	-20 ... 40 °C
Timer:	59 min 50 sec / 10 sec increments 99 h 59 min / 1 min increments
Power consumption Z 446 / Z 446 K:	640 W / 1630 W
Dimensions (W x D x H) Z 446 / Z 446 K:	540 x 670 x 390 mm / 730 x 670 x 390 mm
Weight Z 446 / Z 446 K:	79 kg / 111 kg
Power supply:	230 V, 50/60 Hz

Accessories  Accessories  Accessories Angle rotors for Hermle centrifuges Accessories

Multipurpose centrifuge for the dairy laboratory.

• Timer 0 to 255 minutes
• Automatic brake
• Heating (option) with variable temperature setting up to 65 °C (1200 W)
• Microprocessor control with an LED display to show speed, run time, temperature and error messages
• Cover lock
• Unbalance cut-off
• Emergency release

3 pre-programmed speeds for:

• Gerber Butyrometers (350 x g )
• Solubility in milk powder (164 x g)
• Extraction tubes Roese-Gottlieb/Mojonnier (80 x g)
• 1 variable speed range (200 to 1100 rpm), on request

Specifications
Dimensions (W x D x H):	640 x 640 x 450 mm
Power supply :	230 VAC, 50 Hz

Accessories Accessories for Gerber Centrifuges Universal

Accessories  Accessories  Accessories  Accessories  Accessories

Powerful and versatile Universal Centrifuges for almost every laboratory application. The intuitive design of the centrifuges and accessories enable easy access to the parameter settings, and quick change between applications.

• Backlit Liquid Crystal Display (LCD)
• Corrosion-resistant stainless steel chamber with polycarbonate/ABS plastic lid
• 10 acceleration and deceleration rates, selection of running time from 10 s to 99 h 59 min or continuous as well as quick spin
• CFC-free refrigeration system, sample temperature indication (refrigerated models)
• Over-speed protection
• Dual imbalance sensing

Applications: General and environmental sample preparation, centrifugal, protein and nucleic acid separation as well as chemical separation, cell pelleting, cell concentration, diagnostics and blood sample processing

Please order rotors separately.

Specifications
Max. RCF:	18,624 x g
Max. Speed:	14,000 rpm
Max. Load:	4 x 100 ml
Power consumption:	240 W
Dimensions (W x D x H):	362 x 493 x 330 mm
Weight:	30 kg
Power supply:	230 V, 50/60 Hz

Accessories Swing-out rotor 4 x 100 ml, ID for Frontier™ Multi Pro FC5714 / FC5718 / FC5718R Accessories Swing-out rotor 4 x 100 ml, ID, hermetically sealable for Frontier™ Multi Pro FC5714 / FC5718 / FC5718R Accessories Fixed angle rotor 6 x 50 ml, RB/FA, ID for Frontier™ Multi Pro FC5714 / FC5718 / FC5718R Accessories Fixed angle rotor 12 x 15 ml, RB/FA, ID for Frontier™ Multi Pro FC5714 / FC5718 / FC5718R