Titrators

A titration unit with a reagent recirculation system for motor-powered titration directly from the reagent bottle. Available in three volumes (10 ml, 20 ml and 50 ml). Electronic control of titration enables the achievement of reproducible results and precisely defined dynamics each time. Time-saving rapid titration with subsequent fine titration enhances accuracy and efficiency. The titration impulse triggered by the motor enables the achievement of a droplet break-up with output volumes from 10 µl to 99.999 ml and delivers resolutions up to the third decimal place.

• Electronic control and dispensing of volumes
• A light protection window for the valve block is also included in the scope of delivery
• Titration impulse triggered by the motor enables the achievement of a droplet break u p from 10 µl for precision determination
• Media recirculating system for simple and rapid venting without reagent loss
• Free rotation
• TFT touchscreen with user-friendly menu
• Method memory for nine different titration procedures with storage o f all settings
• USB and RS232 interface for PC connection
• Integration in automated procedures possible
• Discharge valves and valve seats consisting of high-purity aluminium oxide ceramic
• Power supply 100-240 V, with EU, UK, US plug

Supplied with: opus^® titration complete with thread 45 mm, 3 adapters (A 32, A 38 and S 40), 1 screw coupled suction tube, 1 titration discharge unit and 1 power supply, 1 brown light protection window, touch screen module "titration", Data Power Cable 0.75 m, instruction manual, single calibration report

Accessories Bottle holder for bottle-top dispensers and digital burettes Accessories  Accessories Recirculation tubes, FEP, for bottle-top dispensers and digital burettes Accessories  Accessories  Accessories Titration mouse for bottle-top dispensers and digital burettes opus® Accessories Adapter with filling tube NS 12/21 for bottle-top dispensers and digital burettes Accessories  Accessories  Accessories Discharge tube units, flexible, for bottle-top dispensers and digital burettes Accessories  Accessories Discharge valves for bottle-top dispensers and digital burettes Accessories  Accessories  Accessories Cables for bottle-top dispensers and digital burettes Accessories

A titration unit with a reagent recirculation system for manual titration directly from the reagent bottle. Power supplied by a solar cell. Available in three volumes (10 ml, 20 ml and 50 ml). The world"s first digital burette with integrated solar cell. The power supply for the electronics and display is derived exclusively from an integrated solar cell. Easily replaceable valves. The vivid digital display prevents meniscus reading errors and is always clearly legible, regardless of the viewing angle. The handwheels with soft touch surface are ergonomically optimised for particularly precise control.

• Power supplied by a solar cell
• Free rotation
• Media recirculating system for simple and rapid venting without reagent loss
• Handwheels with soft touch surface
• Clearly legible display, regardless of the viewing angle
• A light protection window for the valve block is also included in the scope of delivery
• Individual calibration of user-specified adaptations with "Quick-Cal"
• Discharge valves and valve seats consisting of high-purity aluminium oxide ceramic
• Serial bidirectional interface (RS 232 and USB)

Supplied with: solarus^® with A 45 mm thread, 3 thread adapters ( A 32, A 38 and S 40), discharge tube, 1 suction tube with retainer screw, 1 spanner for valve, brown light protection window, with individual serial number and single calibration report.

Accessories Adapter with filling tube NS 12/21 for bottle-top dispensers and digital burettes Accessories Recirculation tubes, FEP, for bottle-top dispensers and digital burettes Accessories Bottle holder for bottle-top dispensers and digital burettes Accessories  Accessories  Accessories  Accessories  Accessories Discharge tube units, flexible, for bottle-top dispensers and digital burettes Accessories  Accessories Discharge valves for bottle-top dispensers and digital burettes Accessories  Accessories  Accessories Cables for bottle-top dispensers and digital burettes Accessories  Accessories  Accessories  Alternative Digital burettes, Top Burette

You cannot go wrong with the TitroLine^® KF titrators from SI-Analytics. The TitroLine^® 7500 KF is the volumetric generalist for a wide range of use and the TitroLine^® 7500 KF trace is the specialist for low water contents. Both titrators are to be characterized by following features:

• Fast, easy and precise
• With standard methods for different applications (titer determination, blank value…)
• High visible full color display, that can be easily viewed from a distance and extreme angles
• Storage of results via USB and LAN port (PDF and CSV -format)
• with online curve
• With intelligent interchangeable modules (only TitroLine^® 7500 KF)

Applications TitroLine 7500^® KF: KF volumetry, dead-stop-titrations (SO₂, bromine number)
Applications TitroLine 7500^® KF trace: KF coulometry, bromine number

Volumetric KF-Titrators supplied with:
TL 7500 KF 05: titrator unit, interchangeable module WA 05, TM 235 KF titration stand with integrated stirrer and pump, titration vessel TZ 1770, micro-dual platinum electrode KF 1100 and starter kit, power supply 100-240 V
TL 7500 KF 10: titrator unit, interchangeable module WA 10, TM 235 KF titration stand with integrated stirrer and pump, titration vessel TZ 1770, micro-dual platinum electrode KF 1100 and starter kit, power supply 100-240 V
TL 7500 KF 20: titrator unit, interchangeable module WA 20, TM 235 KF titration stand with integrated stirrer and pump, titration vessel TZ 1770, micro-dual platinum electrode KF 1100 and starter kit, power supply 100-240 V

Coulometric KF-titrators supplied with:
TL 7500 KF trace M1: titrator unit, generator electrode TZ 1752 without diaphragm, magnetic stirrer TM 235, titration vessel TZ 1751, micro-dual platinum electrode KF 1150, support rod
TL 7500 KF trace M2: titrator unit, generator electrode TZ 1752 without diaphragm, TM 235 KF titration stand with integrated stirrer and pump, titration vessel TZ 1754, micro-dual platinum electrode KF 1150, support rod
TL 7500 KF trace M3: titrator unit, generator electrode TZ 1753 with diaphragm, magnetic stirrer TM 235, titration vessel TZ 1751, microdual platinum electrode KF 1150, support rod
TL 7500 KF trace M4: titrator unit, generator electrode TZ 1753 with diaphragm, TM 235 KF titration stand with integrated stirrer and pump, titration vessel TZ 1754, micro-dual platinum electrode KF 1150, support rod
TL 7500 KF trace M6: titrator unit, generator electrode TZ 1752 without diaphragm, titration stand TM 235 TO, titration vessel TZ 1754, micro-dual platinum electrode KF 1150, connection cable TZ 3094

Specifications
Measuring range TitroLine 7500® KF:	10ppm - 100%
Dosing accuracy:	<0.15%
Measuring range TitroLine 7500® KF trace:	1ppm - 5% (10µg to 100mg)
Accuracy:	0.3% at 1mg water
Number of user methods:	50
Printer:	HP PCL, Seiko DPU S 445, PDF
Interface:	2 x USB-A, 1 x USB-B, 2 x RS 232, 1 x LAN
PC Software:	TitriSoft 3.5

Accessories Accessories for TITRONIC® / TitroLine®

The manual titration station STI consists of

• a burette with digital display and
• a magnetic stirrer with exactly fitting holder for a conical flask

A visual screen serves as a neutral background and enables the user to determine the colour change at the end of titration exactly. In this way he always carries out his titrations under similar optical conditions. This improves the accuracy and reproduciblity of the results.
This is also aided by the exact positioning of the vessel in the holder on the upper side of the magnetic stirrer. The wings of the screen also protect against dazzle from the sides. Delivery without bottle.

Motor-driven piston burette with 20 or 50ml dosing unit. For manual titrations and highly precise dosing tasks. The TITRONIC^® 300 can be completely controlled from a PC via the USB- or RS-232-interface. Up to 16 burettes can be connected to one another via the RS232 interface according to the daisy chain principle.

T 300/20 M1: Basic unit without magnetic stirrer with ready to use assembled 20 ml dosing unit TZ 3130 with hoses, fittings and titration tip, controller TZ 3880, titration clamp Z 305, stand rod TZ 1748 and power supply 100-240 V
T 300/50 M1: as T 300/20 M1, only with ready to use assembled 50 ml dosing unit TZ 3160
T 300/20 M2: as T 300/20 M1, additionally with magnetic stirrer TM 50
T 300/50 M2: as T 300/20 M2, only with ready to use assembled 50 ml dosing unit TZ 3160

Specifications
Interfaces:	USB A and B, 2x RS 232
Stirrer connection:	TM 50 power supply directly through piston burette
Keyboard connection:	The unit is operated using the keys on the device itself, the controller TZ 3880 and optional PC-keyboard (USB)
Display: Volume indicator:	graphics-capable TFT display 000.005 to 9999.999 ml
Display resolution:	0.005
Dosing speed:	max. 100ml/min (with 50 ml unit)
Fill time:	30secs. to 999secs. adjustable (time depends on cylinder volume)
Dosing units:	20ml or 50ml dosing unit, interchangeable
Burette resolution:	8000
Dispensing accuracy:	0.15% system measurement deviation, 0.05% accidental measurement deviation determined in accordance with EN ISO 8665, Part 3
Supply requirements:	230V, 50/60Hz
Conformity:	ISO 8665, Part 6
CE mark:	EMC: 2004/108/EG; safety EG- Directive 2006/95

Accessories Titrators, digital burettes, Titronic® basic, Titronic® universal, TitroLine easy, accessories Accessories Accessories for TITRONIC® / TitroLine®

Motor-driven piston burette with intelligent exchangeable doing units with automatic recognition of unit size and reagent data. Besides manual titration and highly precise dosing tasks the TITRONIC^® 500 can also be used for the preparation of solutions by entering the weights. The connection of an analytical balance allows the easy automatisation of the solution preparation. The TITRONIC^® 500 can completely controlled from a PC via the USB- or RS-232-interface. Up to 16 burettes can be connected to one another via the RS232 interface according to the daisy chain principle.

T 500: TITRONIC^® 500 basic unit without magnetic stirrer, with stand rod TZ 1510, titration clamp Z 305, controller TZ 3880, power supply 100 - 240 V

T 500-M1: TITRONIC^® 500 basic unit with magnetic stirrer TM 235, with stand rod TZ 1510, titration clamp Z 305, controller TZ 3880, power supply 100 - 240 V

T 500-M2/20: TITRONIC^® 500 basic unit with magnetic stirrer TM 235 and exchangeable unit WA 20, with stand rod TZ 1510, titration clamp Z 305, controller TZ 3880, power supply 100 - 240 V

Technical specification
Interfaces:	3x USB (2 x USB A and 1x USB B), 2 x RS-232-C, 1 x LAN
Stirrer connection:	TM 235 or alternative paddle stirrer
Keyboard:	The unit is operated using the keys on the device itself., the controller TZ 3880 and optional PC-keyboard (USB)
Display:	graphics-capable 3,5" TFT display
Volume display:	00.00 to 999.9ml
Display resolution:	0.001ml (depending on exchangeable unit)
Dosing speed:	max. 100ml/min (with 50ml unit)
Filling speed:	min. 20 to 999 sec adjustable (time according to the cylinder volume)
Exchangeable units:	5, 10, 20ml or 50ml exchangeable units with reagent recognition
Burette resolution:	20000 steps
Dosing accuracy:	systematic error 0.15%, random error 0.05% in compliance with EN ISO 8655-6
Netzanschluss:	100-240V; 50/60Hz
Conformity:	ISO 8655, part 6
CE-mark:	EMC: 2004/108/EG; safety EG- Directive 2006/95

Accessories Accessories for TITRONIC® / TitroLine®

With automatic zero adjustment.

Accessories General-purpose thermometers with safety coating, red filling Accessories Automatic burette, Silberbrand, class B Accessories Hydrometer jars, DURAN®

Boro 3.3. Available in clear glass or amber glassor soda-lime glass. Volume: 2000ml, diameter: 160mm, height: 200mm.

• Exemplary safety and reliability
• Robust casing of polyurethane
• Distillation time approx.. 3 mins. per sample
• Detection limit 0.1 mg N
• Recovery rate >99.5%
• Reproducibility ± 1%
• Steam generating capacity adjustable from 10% - 100%
• Extremely simple, menu-controlled operation of the programmable units via one single operating element (behr one-button operation)
• Programmable reaction time
• Serial interface (RS232)
• Filling level monitoring for can set
• Practical quick clamping device equally suited for the "left-handed" analyst