Tubing, plastic

Transparent. Durometer 45 Shore D. Resistant to acids, bases, alcohols, and salt solutions.
Temperature restistant up to 80° C. Supplied per meter.

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.

Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.
The tubing is 500 mm in length but can be trimmed shorter to a desired length. Further tubing lengths available on request.

Made in a compound of pure PTFE and fine carbon dust.
Main characteristics: good conducting capacity, high chemical resistance (except of substances with high reactivity to carbon), load resistance 10⁶ ohm/m, black.
Temperature: -200 °C to 250 °C

Flanged PTFE tubing with black tube end fittings UNF ¼" 28 G made of PP and washers made of PA. The tubing is ready for use. Temperature resistant from 0 to +100 °C, pressure resistant up to 30 bar, universal chemical resistance.

Biologically inert and ultra-pure, Biotech CE is available in the largest selection of concise MWCOs (0.1 to 1000 kD) and sizes to provide better molecular separation for desalting, isolating ionic species and macromolecular purifications. Moderate chemical compatibility tolerates weak or dilute acids or bases and mild alcohols with only a slight change to the MWCO. Not for use with organic solvents. Use with pH 2 to 9 and temperature 4 to 37 °C.

Corrugated tubing with circular corrugations around the longitudinal axis and cylindrical tubing ends with a length of 40mm which can for example be connected directly to fittings, stopcocks or hose connectors. Together with BOLA Laboratory Screw Joints, the connection is tight and suitable for vacuum.

• Highly flexible
• Tight bending radius only causes little cross-section reduction
• Non-porous
• Transparent
• Ideal for connections under vibrations
• Usable with a small bending radius
• For compensation of thermal expansions
• For easy handling of liquids

Autoclavable, transparent and non-toxic, non ageing and non oxidising. Packed in PE bags. The tubing is marked every metre. Good resistance against strong acids and akalis, fair resistance against organic solvents. Durometer 77 Shore A.

Assemblies and Tubings
Hamilton Luer Lock tubing assemblies are ideal for quickly connecting and disconnecting components with male luer locks suitable for micro fluidic applications. Hamilton offers a wide varitey of chemically inert tubing assemblies for specific fluid applications. Different gauges, lengths, hub assemblies, and fittings are available according to standard or customer specification. To build your own assemblies, Hamilton offers fitting kits and tubings. Hamilton fittings and adapters are installed finger tight and provide leak tight seal rated to 0.6 MPa.

Hub Tubing Assemblies with 2 Hubs and further tubing lengths available on request.
The tubing is 300 mm in length but can be trimmed shorter to a desired length.

With 3 colour-coded bridges (international standards). Shore: 55. Fits most common peristaltic pump models, e.g. Verder, Ismatec, Watson-Marlow, IKA and Heidolph. Standard tubing, transparent. Length 380mm. Long working lifespan. Good resistance to acids and alkalis. Food-safe.

Suitable for all rubber tubings, even PTFE and fabric-reinforced tubings. Interchangeable blade.