Centrifuge tubes

Conical bottom centrifuge tube is used for testing of petroleum products. Scale and legend are durable white ceramic enamel except California type. Top is tooled to accept snap cap. Conforming to USP Type I and ASTM E438, Type I, Class A requirements.

• Wall thickness approx.: 1 mm
• Maximum loading: 3500 x g rcf.
• Conical bottom

• Wall thickness: 1 mm
• Maximum loading: 3500 x g rcf.

Thin channel, crossflow filter units with 50cm² / 200cm² filter areas for capacities between 100ml / 500ml and 5L. This system provides high crossflow rates at minimum pumping pressure and does not require additional fittings for scale-up. VivaFlow 50 is easy to operate with a flow restrictor and, optionally, a pressure indicator. Modular construction with luer connections allows interlocking of units in series for easy scale-up. Recovery rates are maximised due to optimised recirculation volume and by use of low adsorption materials. Disposable.
For greater volumes, VivaFlow 200 is available with a filter area of 200cm² and includes pressure indicator, flow restrictor, filtrate tubing and connectors.
Membrane: polyethersulphone

These tubes coloured by silver ion diffusion are particularly suitable for handling UV-sensitive substances. The tubes are manufactured from borosilicate glass 3.3 which is conform to USP Type I and ASTM E438, Type I, Class A. They are supplied with a green cap.

For Oak Ridge centrifuge test tubes made of PP, PC and polysulphone.

Transparent, graduated tubes made of polypropylene copolymer. Good chemical resistance, autoclavable. For centrifugation in cooled and uncooled centrifuges. 50 and 100 ml tubes with reinforced rim.

Transparent. For use up to 50,000 x g in cooled and uncooled centrifuges. PP sealing caps with silicone seal for additional leak protection when centrifuging at >10,000 x g or when centrifuging hazardous substances.

• Round bottom for high speed rotors
• Autoclavable
• Temperature resistant from -135 … +135 °C

• High resistance to temperatures and chemicals
• Autoclavable at 121 °C / 2.1 bar (cap not closed)
• Place for markings on label area and flat cover
• Membrane can be punctured by sampling-needles
• Graduation
• Round inside bottom for easy recovery of pellets or fluids
• Made from clear polypropylene
• Easy closure, for example for use in the chemical laboratories of a hospital

For the storage and transport of samples.

• Transparent
• White labelling field
• Temperature resistant from -80 ° C to 121 ° C
• Blue, tight screw cap
• Sterile tubes are pyrogen- and endotoxin-free
• Autoclavable

With conical base.

Please order caps separately.

For swing out rotors and buckets.

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Max. speed: 3220 x g (max. 4000 rpm)
• Buckets, caps and adapters are all autoclavable (20 mins. at 121 °C)
• Only for 5810 / 5810 R

For use with standard-, Vacutainer^®-, Falcon^®-tubes and bottles.

Swing-out and fixed-angle rotors for the centrifuges 5804, 5804 R, 5810 and 5810 R.

• Aluminium rotors
• Resistant to chemicals and corrosion
• Eppendorf QuickLock^® caps and QuickLock^® lids
• Many possible applications due to different adapters

• Max. speed: 15550 x g (max. 11000 rpm)
• If used in refrigerated centrifuge 5810 R: max. speed is 18500 x g (max. 12000 rpm )
• Incl. rotor lid
• Rotors, covers and adapters are all autoclavable (at 121 °C, 20 min. )