Centrifuge tubes

• Cylindrical
• Autoclavable (121 °C)

Accessories Stoppers, PE for centrifuge tubes, PP

To DIN 58970 part 2. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
Maximum loading: 4000xg rcf.

Alternative Centrifuge tubes, round bottom, AR glass® Alternative Centrifuge tubes, glass, round bottom, graduated, DURAN®, Borosilicate glass 3.3 Alternative Centrifuge bottles Nalgene™, PP-copolymer Alternative Centrifuge tubes, plastic, round bottom, PC, graduated

PC, without closures. Friction-fit closures Type DS3111 for high-speed centrifugation please order separately. Transparent. Autoclavable. Can be used in refrigerated or ambient centrifuges at up to 50000xg rcf. Temperature resistant from -135 to +135 °C. Lip (on Cat. No. 9.315 660 and 9.315 661) allows easier retrieval from rotor cavities.

Accessories Closures for Nalgene™ Centrifuge tubes

Transparent. Polysulphone (PSU) with PP screw cap. As stable and robust as PC test-tubes, but considerably more resistant to acids and alkalis. Autoclavable. Can be used in refrigerated or ambient centrifuges at up to 50000xg rcf. Accessory sealing cap assemblies are available for all sizes. Notes: If autoclaving, the tubes must be filled to 80% of their total capacity. Polysulphone must not be used with Tween, as this causes hairline cracks to form.

Accessories Sealing cap assemblies Nalgene™, PP Accessories Sealing cap assemblies with silicone seal Nalgene™, PP Alternative Centrifuge tubes Nalgene™ Oak Ridge, FEP Alternative Nalgene™ Oak-Ridge centrifuge tubes, PC Alternative Nalgene™ Oak-Ridge centrifuge tubes, PP-copolymer

Cylindrical, with conical base. Graduations and labelling in high-contrast blue enamel. Maximum loading 700 xg rcf. Internal diam. neck approx. 17 mm.

Graduated, ml:	In subdivisions, ml:
0 to 0.5	0.05
0.5 to 2	0.10
2 to 3	0.20
3 to 5	0.50
5 to 10	1.00
10 to 25	5.00
25 to 100	25.0

Alternative ASTM centrifuge tube, pear-shaped with cylindrical base, borosilicate glass 3.3

The range of Greiner Bio-One tubes and multipurpose containers/beakers is very versatile and meets a wide variety of different demands. Polystyrene is ideally suited for optical measurements
as a result of its high clarity.

Proporties:

• Available in different sizes
• High clarity
• Appropriate grip stoppers for each tube are listed in the table with their Art.-No.

PC with PP screw cap. Crystal clear. Good mechanical strength. Autoclavable. Leak-proof even at low speeds. In order to ensure that the system is leak-proof even at high speeds and when centrifuging dangerous substances, the 250ml and 1000ml sizes must be used in conjunction with sealing screw cap sets.

Accessories Sealing cap assemblies Nalgene™, PP Accessories Sealing cap assemblies with silicone seal Nalgene™, PP Alternative Wide-mouth centrifuge bottles Nalgene™, PP-copolymer Alternative Centrifuge bottles Nalgene™, PP-copolymer

PP-copolymer with sealing screw cap. Autoclavable.

Alternative Centrifuge bottles Nalgene™, PC Alternative Centrifuge bottles Nalgene™, PP-copolymer

Pear-shaped with cylindrical base. Former standard ASTM D 96. Capacity 100ml. Graduations and labelling in high-contrast blue enamel. Maximum loading 700xg rcf. Internal diam. neck approx. 17 mm.

Graduated, ml:	In subdivisions, ml:
0 to 1.5	0.10
1.5 to 3	0.50
3 to 5	0.50
5 to 10	1.00
10 to 25	5.00
25 to 100	25.0

Alternative ASTM centrifuge tube, cylindrical, with conical base, borosilicate glass 3.3

PP-copolymer with PP screw cap. Autoclavable.

Accessories Sealing cap assemblies Nalgene™, PP Accessories Sealing cap assemblies with silicone seal Nalgene™, PP Alternative Centrifuge tubes, round bottom, DURAN® Alternative Centrifuge tubes, round bottom, AR glass® Alternative Centrifuge tubes, glass, round bottom, graduated, DURAN®, Borosilicate glass 3.3 Alternative Centrifuge bottles Nalgene™, PC Alternative Wide-mouth centrifuge bottles Nalgene™, PP-copolymer

Polypropylene tubes with very good thermal, mechanical and chemical stability. Fitted with screw-on closure. Packed in boxes or bags. With graduations and labelling area. Tubes are sterile, cytotoxicity-free, DNase/RNase- and human DNA-free.

Specifications:
Centrifugation capacitiy (15 - 50 ml):	3215 x g / 4500 rpm in swing out rotors 8965 x g / 9000 rpm in fixed angle rotors

New and improved conical tubes with the largest writing area on the market for increased traceability with additional space for labeling information. Recyclable plastic rack reduces waste in the lab. New conical tubes have higher RCF ratings, which enable more applications from low speed to super speed centrifugation. They meet USP class VI requirements and are non-cytotoxic, pyrogen-free and RNase/DNase free. Graduated, leak proof and sterile (SAL 10^-6)
Material tubes: PP
Material caps: HDPE

In white enamel, rimless. Maximum loading: 3500xg rcf.

Alternative Centrifuge tubes, round bottom, DURAN® Alternative Centrifuge tubes, round bottom, AR glass® Alternative Centrifuge bottles Nalgene™, PP-copolymer Alternative Centrifuge tubes, plastic, round bottom, PC, graduated

The range of Greiner Bio-One tubes and multipurpose containers/beakers is very versatile and meets a wide variety of different demands. Polypropylene displays high thermal, mechanical and chemical resistance. It is therefore recommended for the storage of chemical and biological samples.

Proporties:

• Appropriate grip stoppers for each tube are listed in the table with their Art.-No.
• Available in different sizes

Autoclavable. PP tubes can withstand temperatures up to +120°C. PMP (TPX^®) tubes can withstand temperatures up to +170°C. Rimmed. High chemical resistance. Good transparency, especially when in contact with liquids. Cannot be used with naked flame. Can be used as conventional test tubes.

Teflon^® FEP with Tefzel^® ETFE screw cap. Resistant to all acids, bases and solvents. Autoclavable. Operating temperature range -100 to +150°C. Can be used brim-full in refrigerated centrifuges at up to 50000xg rcf. Leak-proof. Accessory sealing cap assemblies are available for all sizes.

Accessories Sealing cap assemblies Nalgene™, PP Accessories Sealing cap assemblies with silicone seal Nalgene™, PP Alternative Centrifuge tubes Nalgene™ Oak Ridge, PSU Alternative Nalgene™ Oak-Ridge centrifuge tubes, PC Alternative Nalgene™ Oak-Ridge centrifuge tubes, PP-copolymer

Designed to boost productivity and pellet recovery in super speed, large volume gross separation applications. Process one full Litre in each window-clear bottle at speeds up to 15810 x g. Graduated, wide-mouth bottle simplifies decanting, re-suspensions and pellet removal. Smooth inner walls are less likely to shear delicate cells. Ideal for bacterial, yeast and tissue isolations. Improve viral harvesting in vaccine production. Reduce shearing in mammalian culture separations. PC offers excellent clarity. Ergonomic design facilitates loading, recovery and storage of samples. Recommended operating temperature range is from 4 °C to 22 °C; storage to - 70 °C. Before autoclaving, just set closure on top of bottles without engaging the threads. For proper performance these bottles must be filled to at least 80 % of the total capacity.

Translucent. PP. Autoclavable. Can withstand temperatures up to +120°C. Rimmed. High chemical resistance. Cannot be used with naked flame. Can also be used as conventional test tubes.

Transparent. PC. Rimless, with moulded graduations.
Slightly yellowish in colour. Round bottom. For use with loads up to 20000xg rcf.

Note: the strength of Polycarbonate is reduced when it is autoclaved or cleaned using alkaline detergents.

Alternative Centrifuge tubes, round bottom, DURAN® Alternative Centrifuge tubes, round bottom, AR glass® Alternative Centrifuge tubes, glass, round bottom, graduated, DURAN®, Borosilicate glass 3.3

Borosilicate glass. The tubes have been chemically strengthened to achieve a greater mechanical strength than standard borosilicate centrifuge tubes. These tubes can be centrifuged up to 13,100 RCF when used with an accessory rubber adapter sleeve in a 50 ml rotor cavity. They can withstand temperatures up to 300ºC. Autoclavable.

Alternative Centrifuge tubes, round bottom, DURAN® Alternative Centrifuge tubes, round bottom, AR glass® Alternative Centrifuge bottles Nalgene™, PP-copolymer Alternative Centrifuge tubes, plastic, round bottom, PC, graduated

Properties:
- Free of detectable DNase, RNase, human DNA

• Non-Pyrogenic
• High chemical and temperature resistance
• Available in different sizes
• Available for Eppendorf, Vitatron and Roche systems
• Brown reaction tube for light-sensitive materials

The range of Greiner Bio-One tubes and multipurpose containers/beakers is very versatile and meets a wide variety of different demands. Polypropylene displays high thermal, mechanical and chemical resistance. It is therefore recommended for the storage of chemical and biological samples. CELLSTAR® with physically modified surfaces for adherent or suspension cell cultures.

Proporties:

• Light protection tubes for light-sensitive materials and reactions
• Ideal for small volumes and valuable sample (sample collects at the conical bottom)
• Are free of detectable DNase / RNase
• Non pyrogenic, non cytotoxic
• Available in different sizes

Centrifuge bottle with 2L capacity.

• Separating large volumes up to 12L
• Centrifugation up to 7333xg, at temperatures from 4°C to 22°C
• Bottle meets the requirements of USP VI
• Non-cytotoxic, not hemolytic
• PPCO bottle, PP seal screw cap with silicone seal
• Graduated, total volume of 2380ml
• Excellent chemical resistance
• Before autoclaving, unscrew the cap and place it on the bottle neck
• Bottles must always be at least 80% filled

The closure design features a two-piece plug and sealing cap to support aseptic handling techniques. Use of the two-piece closure system protects the bottle contents from contamination when the support bridge is applied and removed from the bottle. The plug includes a retaining ring to ensure and maintain the placement of the gasket during use.