Samplers, Liquids

High-performance plates for manual or automated applications. Suitable for sample storage and preparation, bacteria and yeast cultivation, DNA and RNA isolation, protein analysis and plasmid purification.

• Clear wells
• Frame, white or coloured
• High-contrast, alphanumeric lettering
• Autoclavable (121 °C, 20 min)
• Centrifugation resistance up to 6000 × g
• Rounded RecoverMax^®-Well-Design
• Elevated well frames for reliable sealing, even with heat sealing
• Stackable
• PCR clean: free of human DNA, DNase, RNase and PCR inhibitors or sterile

Alternative

Without openings, undercuts or crevices in which residues could collect. Pore-free finishing produced by high-quality laser welding seams. The dip sampler is sterilisable by flame sterilisation or steam sterilisation and can therefore be made completely germ-free. Complete with rod.

According to DIN 51750 pt. 2
Dipping Vessel
For sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.
Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.
Emptying at the top via the open flaps.
Dipping bottle EX
For sampling flammable liquids.
For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.
Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.
Dipping bottle glass
For sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.
Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.
Immersion Cylinders
For target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cables
Target spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.
Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.
Target immersion cylinder
With the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.
Mini immersion cylinder
For sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.

Accessories Manually-operated reels and lowering cables

In numerous situations, rapid and contamination-free samples have to be taken. DispoSamplers are perfect for this application. They are cleanroom manufactured, individually packed and always ready to use. Avoid expensive decontamination or cleaning of soiled samplers. Gamma sterilised versions are also available.

MultiDispo: For free-flowing powders and small-grain granulates. Easy emptying through opening in the handle.
ZoneDispo: For free-flowing powders and small-grain granulates. Collected sample can be transported in closed sampler.
TargetDispo: For taking target-point samples from powders and granulates.
PowderDispo: For taking cross-section samples of powdery or slightly cohesive substances.
DispoPicker: For taking cross-section samples from powders and small-grain granulates. With closed tip.
DispoLance: For direct removal and filling of free-flowing powders and small-grain granulates.
MicroDispo: For free-flowing powders and small-grain bulk materials. For small sample quantities (10 ml).

Alternative Disposable liquid samplers, HDPE

The sampler is suitable for deep-frozen products in the food industry and semi-solid substances. With the robust hollow borer, with sharp sawing crown, a cross-sectional sample of up to 20 cm length can be cut out.

• Stainless steel V4A (1.4404/1.4571)
• Sterilisable
• Food-safe

Scope of supply: Borer, borer head for use in conventional drills and rod for pressing the cylindrical sample out of the borer head

Taking samples is quick, easy, clean and practical.
With the MiniSampler, the sample liquid only comes into contact with the suction hose and the sample bottle. Cross contamination is largely prevented. Bottles can be tightly sealed immediately after the sample is taken with a tamper-evident cap.
The single use, PE suction hose can be quickly replaced, ensuring that samples are never contaminated. A new hose can be used for each sample if required. Because of its small diameter (8mm) and flexibility the hose can reach sampling areas that are otherwise inaccessible. Also suitable for viscous oils.

Scope of supply: 10 x 100 ml PE bottles, 10 m of PE suction hose (6 x 8mm), 1 hose cutter , 1 hose weight (V2A/nickel-plated brass), 20 seal-it safety seal labels, carrying case

Alternative Sampler Mini-Sampler, PTFE

UniSampler with PVC hose and hose weight made of stainless steel. For deep, hard-to-reach places. The mass of the metal tube drags the hose to any depth.

• PVC sample tubing, 2.5 m long
• Incl. 1000ml sample bottle, manual vacuum pump and adapter for sample bottle, V2A hose weight, 20 seal-it safety seal labels, supplied complete in carrying case
• Universal bottle adapter made of PVC, for bottle necks Ø 24 mm, 31 mm, 39 mm and 50 mm nominal dimension

Accessories Accesories for UniSampler Alternative Vampire Sampler

Sampler for thin to viscous liquids. Easy use with one-handed operation. With discharge funnel for safe filling of sample bottles.

A new, easy-to-handle sample taking system for manual sampling.
General purpose thanks to

• quick and easy exchange of the sample taking equipment
• simple change by pressing the spring mechanism
• extremely strong fiber glass telescopic poles, non-corrosive
• for up to 20 different sample taking devices
• four different fiber glass telescopic poles extensible from 1.5m up to 6.00m in length

Please order telescopic poles separately.
Nothing can be spilt because beaker automatically swings into a vertical position. Dimension of the beaker: 100 mm diameter, 130 mm height, 1 liter volume. With universal connecting part.

Accessories Fiber glass telescopic pole INGENIOUS Successor Plankton net Alternative Angled sample beaker, PP Alternative Angled sample beaker, stainless steel Alternative Angled sample beaker, stainless steel Alternative Waterlanding net Alternative Wire sieve net Alternative Dip net Alternative Vegetation scraping net Alternative Plankton net

A new, easy-to-handle sample taking system for manual sampling.
General purpose thanks to

• quick and easy exchange of the sample taking equipment
• simple change by pressing the spring mechanism
• extremely strong fiber glass telescopic poles, non-corrosive
• for up to 20 different sample taking devices
• four different fiber glass telescopic poles extensible from 1.5m up to 6.00m in length

Please order telescopic poles separately.
Mesh width 65 µm, robust version with sturdy aluminium ring of 200 mm diameter. The ring is covered with nylon fabric to protect the silk gauze from ripping up. With 100 ml collecting vessel (100 ml Kautex flask). Net could be opened at the botton for filling the bottles. With universal connecting part.

Accessories Fiber glass telescopic pole INGENIOUS Alternative Waterlanding net Alternative Wire sieve net Alternative Dip net Alternative Vegetation scraping net Alternative Pendulum beaker, stainless steel