Spray, dropping bottles

Solvent resistant print, indicating capacity, formula and hazard symbol. Text in english. Markings in accordance with hazardous material regulations. Non-metallic vent keeps contents in bottle. No risk of solvent leakage.

Prevent chemical accidents in the lab with Nalgene Right-to-Understand LDPE Wash Bottles. Bottles are pre-labeled with chemical identification and safe handling information following the GHS specifications as applicable to secondary laboratory containers. Wash bottles are ready to use when you transfer common laboratory chemicals from manufacturers" containers. Self-venting wash bottles eliminate risk of bottles self-dispensing.

• Bottles are made from high quality Nalgene materials for low extractables and long life in the lab
• Printed with 100% Globally Harmonized System (GHS) chemical safety information. No other system markings are used on the bottles, which eliminates confusion
• Color coded for easy chemical identification at a glance
• Dispensing nozzles are carefully molded to deliver a straight stream for precision dispensing and safety
• Self-venting, so idle bottles won"t drip on the bench top
• Designed to dispense through the top with a closure and stem molded in one piece for uniform leakproof service

Red. LDPE bottle with leakproof PP screw cap. Bottle and dispensing jet are moulded in one piece.

For LaboPlast^® pressure atomizer and pressure sprayer Turn"n"Spray.

Transparent. Available in four different colours to facilitate ready identification. Screw cap and PP spray tube. Precise spray jet and optimised medium backflow through the continuous and finely drawn tip of the spray tube.

No leakage or dripping with the VENT-CAP screw cap, the design of which prevents almost all static overpressure.

The pressure sprayer is ideal to spray a wide range of liquids uniformly. The practical 360° spray function allows you to spray overhead. The adjustable spray jet, with a nozzle diameter of 0.8 mm, can be adjusted from a fine spray mist to a powerful jet. Extension for spray lance 30 cm available as accessory.

• Wetted parts HDPE, PP, FKM, V4A
• Plastic container made of HDPE
• Safety valve to compensate overpressure, max. 4 bar

For spraying various media, such as oils, fats or flavourings. The adjustable spray jet, with a nozzle diameter of 0.8 mm, can be adjusted from a fine spray mist to a powerful jet.

• Wetted parts HDPE, PP, VMQ, V2A
• Plastic container made of HDPE
• Safety valve to compensate overpressure, max. 3 bar
• Transparent viewing window for easy reading of the filling level
• Rubberised stand ring
• Food-safe

• Convenient storage and transport of up to six wash bottles
• Moulded in rugged and lightweight polypropylene
• Autoclavable at 121°C
• Chemical and corrosion resistant
• Secure handle
• Holds 250ml or 500ml bottles
• Aperture diameter 74mm
• Dimensions (W x D x H): 286 x 194 x 225mm.

These bottles include components made of reprocessed PFA material from our production process. The tip opening can be enlarged by cutting.

• High temperature and chemical resistance
• ETFE screw caps
• FEP wash elements

Drop volume averages 40µL per drop depending on reagent used and the dropper bottles have an excellent chemical resistance and have been rated suitable for most biotech, diagnostic, and pharmaceutical applications.

• Low-density polyethylene (LDPE) bottle permits easy content identification and fluid fill volumes
• Dropper control tip snaps into place for a secure fit
• Leak-proof
• Cap 15 - 415 mm

For dropping bottles or pipette bottles made of amber glass. Consisting of: screw cap, suction bulb (blue) and glass pipette, DIN 18.

Please order bottles separately.

The LDPE dropper bottles with tethered caps are available in sizes ranging from 15mL to 250mL, and made from high quality lab grade LDPE plastic resin materials, these droppers are useful for containing and dispensing a wide range of lab reagents including most acids, bases and alcohols.

Natural.

• Scale Graduation
• Large, easy to read scale for an exact dosage
• Thin-walled needle (according to EN ISO 9626:2001) with extremely fine three facets grinding and a special silicone coating
• Protective caps at the ends of the syringe guarantee its sterility
• The crystal clear barrel of the syringe makes sure that air bubbles are easily identified
• Piston with double sealing ring
• Integral piston stop
• Round shaped cylinder with black scale
• Materials: PP, PS, IR, PE, stainless steel, silicone oil
• Latex free, PVC- free, DEHP-free

With durable, multi-lingual printing of the ingredient in english, french, german and spanish language. Available for different solvents, each bottle is printed with the corresponding GHS symbols, NFPA code and risk/safety information. Colour coded PP closures with precision tips.

BOD measurement is an important measurement of the effects of domestic and industrial waste water on sewage plants and outflow points. The sensor system BD 600 is a 6 sample system that allows precise measurements of BOD based on the manometric principle. Manometric respirometers relate oxygen uptake to the change in pressure caused by oxygen consumption while maintaining a constant volume. Due to the modern integral pressure sensors, it is not necessary to use mercury for the measurements. The BOD values are stored automatically in the sensor memory at regular intervals and can be called up on the large-format display at any time without the need for time-consuming conversion using factors. This means that test series that end on a Sunday can be evaluated during the following week without any problem. Measurement series can be stored on USB stick/ SD card or transferred via USB cable to evaluate the data on a computer. The measurement period is user-selectable between 1 and 28 days to suit the application. While short measurement periods are useful for scientific applications, standard BOD measurements typically extend over a period of 5 days - and manometric determination of OECD, for example, generally takes place over a period of 28 days.

Scope of supply:

• BD 600, complete unit with 6 or 12* sensor heads and control unit with batteries
• Power supply unit incl. Y-cable for common power supply of BD 600 and stirring unit
• Inductive stirring unit
• 6 or 12* sample bottles
• 6 or 12* rubber gaskets
• 6 or 12* magnetic stirring rods
• 1 overflow flask, 157 ml
• 1 overflow flask, 428 ml
• 1 bottle, 50 ml potassium hydroxide solution
• 1 bottle, 50 ml nitrification inhibitor solution
• 1 instruction manual
• remote control

Transparent. Narrow and wide-mouth bottles. Screw cap and spray tube made of PP.

Manufactured from highly translucent and semi-rigid polyethylene with walls and crush-resistant corners. Colored body and caps enables fast, easy and practical identification of bottle content. Round neck form allows un-restricted liquid flow-out without leaving any residue at the bottle neck. Flexible delivery tube guarantees a fine and straight flow with an application of a slight pressure on the body. "Goose neck" design of the delivery tube guarantees easy and precise reaching to the flask corners. The tip of the delivery tube can be cut to increase the flow rate.

Colour coded, one-piece closures, PP.

White. Bottle including lid made from PP, atomizer head made from LDPE. By turning the nozzle, delivery can be varied from a fine spray to a solid stream.

With durable, multi-lingual printing of the ingredient in english, french, german and spanish language. DripLok^® vapour venting valve prevents leaking and dripping. Available for different solvents, each bottle is printed with the corresponding GHS symbols, NFPA code and risk/safety information. Colour coded PP closures with precision tips.

Transparent. Narrow and wide-mouth bottles, LDPE. Screw cap and spray tube made of PP.

• Suitable for food
• ISO 13485:2003
• USP Class VI